summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcmcia
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-07-24 12:23:21 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-08-03 09:02:35 +0200
commit1d5cc192d431bce2ebe9fde64054ce903200e179 (patch)
treecdcdfb77712349bf46f0876d420e2be81f901d74 /drivers/net/pcmcia
parentac8b422838046ffc26be4874a3cbae0d313f4209 (diff)
pcmcia: use pcmica_{read,write}_config_byte
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/pcmcia')
-rw-r--r--drivers/net/pcmcia/axnet_cs.c3
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c21
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c16
3 files changed, 14 insertions, 26 deletions
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 467fd4bfb2b..ee0a6d036f9 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -378,8 +378,7 @@ static int axnet_config(struct pcmcia_device *link)
/* Maybe PHY is in power down mode. (PPD_SET = 1)
Bit 2 of CCSR is active low. */
if (i == 32) {
- conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 };
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
for (i = 0; i < 32; i++) {
j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index c0eacfae151..c0d85af3e94 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -757,29 +757,20 @@ static void nmclan_reset(struct net_device *dev)
#if RESET_XILINX
struct pcmcia_device *link = &lp->link;
- conf_reg_t reg;
- u_long OrigCorValue;
+ u8 OrigCorValue;
/* Save original COR value */
- reg.Function = 0;
- reg.Action = CS_READ;
- reg.Offset = CISREG_COR;
- reg.Value = 0;
- pcmcia_access_configuration_register(link, &reg);
- OrigCorValue = reg.Value;
+ pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
/* Reset Xilinx */
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_COR;
- dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+ dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
OrigCorValue);
- reg.Value = COR_SOFT_RESET;
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
/* Need to wait for 20 ms for PCMCIA to finish reset. */
/* Restore original COR configuration index */
- reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
- pcmcia_access_configuration_register(link, &reg);
+ pcmcia_write_config_byte(link, CISREG_COR,
+ (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
/* Xilinx is now completely reset along with the MACE chip. */
lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index a7662f0832e..e3a85ce8988 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -869,7 +869,6 @@ xirc2ps_config(struct pcmcia_device * link)
goto config_error;
if (local->dingo) {
- conf_reg_t reg;
win_req_t req;
memreq_t mem;
@@ -878,15 +877,14 @@ xirc2ps_config(struct pcmcia_device * link)
* the base address of the ethernet port (BasePort1) is written
* to the BAR registers of the modem.
*/
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_0;
- reg.Value = link->io.BasePort2 & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_0,
+ link->io.BasePort2 & 0xff);
+ if (err)
goto config_error;
- reg.Action = CS_WRITE;
- reg.Offset = CISREG_IOBASE_1;
- reg.Value = (link->io.BasePort2 >> 8) & 0xff;
- if ((err = pcmcia_access_configuration_register(link, &reg)))
+
+ err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+ (link->io.BasePort2 >> 8) & 0xff);
+ if (err)
goto config_error;
/* There is no config entry for the Ethernet part which