Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

1 files changed, 105 insertions, 1 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index d849684231c..bc7c7d2f75f 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -283,6 +283,110 @@ static int ksz9021_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+#define MII_KSZ9031RN_MMD_CTRL_REG	0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG	0x0e
+#define OP_DATA				1
+#define KSZ9031_PS_TO_REG		60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW	4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW	5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW	6
+#define MII_KSZ9031RN_CLK_PAD_SKEW	8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+				  u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+				 u8 mode, u32 dev_addr, u32 regnum)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+				       struct device_node *of_node,
+				       u16 reg, size_t field_sz,
+				       char *field[], u8 numfields)
+{
+	int val[4] = {-1, -2, -3, -4};
+	int matches = 0;
+	u16 mask;
+	u16 maxval;
+	u16 newval;
+	int i;
+
+	for (i = 0; i < numfields; i++)
+		if (!of_property_read_u32(of_node, field[i], val + i))
+			matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < numfields)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+	else
+		newval = 0;
+
+	maxval = (field_sz == 4) ? 0xf : 0x1f;
+	for (i = 0; i < numfields; i++)
+		if (val[i] != -(i + 1)) {
+			mask = 0xffff;
+			mask ^= maxval << (field_sz * i);
+			newval = (newval & mask) |
+				(((val[i] / KSZ9031_PS_TO_REG) & maxval)
+					<< (field_sz * i));
+		}
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct device_node *of_node = dev->of_node;
+	char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+	char *rx_data_skews[4] = {
+		"rxd0-skew-ps", "rxd1-skew-ps",
+		"rxd2-skew-ps", "rxd3-skew-ps"
+	};
+	char *tx_data_skews[4] = {
+		"txd0-skew-ps", "txd1-skew-ps",
+		"txd2-skew-ps", "txd3-skew-ps"
+	};
+	char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+
+	if (!of_node && dev->parent->of_node)
+		of_node = dev->parent->of_node;
+
+	if (of_node) {
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+				clk_skews, 2);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+				control_skews, 2);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+				rx_data_skews, 4);
+
+		ksz9031_of_load_skew_values(phydev, of_node,
+				MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+				tx_data_skews, 4);
+	}
+	return 0;
+}
+
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	(1 << 6)
 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	(1 << 4)
@@ -469,7 +573,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= ksz9031_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,