Merge tag 'v3.15-rc1' into patchwork

Linux 3.15-rc1

* tag 'v3.15-rc1': (12180 commits)
  Linux 3.15-rc1
  mm: Initialize error in shmem_file_aio_read()
  cifs: Use min_t() when comparing "size_t" and "unsigned long"
  sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
  powerpc: Don't try to set LPCR unless we're in hypervisor mode
  futex: update documentation for ordering guarantees
  ceph: fix pr_fmt() redefinition
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  ...

1 files changed, 45 insertions, 23 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 19c9eca0ef2..1b6d09aef42 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -38,6 +38,26 @@
 
 #include <asm/irq.h>
 
+static const char *phy_speed_to_str(int speed)
+{
+	switch (speed) {
+	case SPEED_10:
+		return "10Mbps";
+	case SPEED_100:
+		return "100Mbps";
+	case SPEED_1000:
+		return "1Gbps";
+	case SPEED_2500:
+		return "2.5Gbps";
+	case SPEED_10000:
+		return "10Gbps";
+	case SPEED_UNKNOWN:
+		return "Unknown";
+	default:
+		return "Unsupported (update phy.c)";
+	}
+}
+
 /**
  * phy_print_status - Convenience function to print out the current phy status
  * @phydev: the phy_device struct
@@ -45,12 +65,13 @@
 void phy_print_status(struct phy_device *phydev)
 {
 	if (phydev->link) {
-		pr_info("%s - Link is Up - %d/%s\n",
-			dev_name(&phydev->dev),
-			phydev->speed,
-			DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+		netdev_info(phydev->attached_dev,
+			"Link is Up - %s/%s - flow control %s\n",
+			phy_speed_to_str(phydev->speed),
+			DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
+			phydev->pause ? "rx/tx" : "off");
 	} else	{
-		pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
+		netdev_info(phydev->attached_dev, "Link is Down\n");
 	}
 }
 EXPORT_SYMBOL(phy_print_status);
@@ -62,7 +83,7 @@ EXPORT_SYMBOL(phy_print_status);
  * If the @phydev driver has an ack_interrupt function, call it to
  * ack and clear the phy device's interrupt.
  *
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
  */
 static int phy_clear_interrupt(struct phy_device *phydev)
 {
@@ -77,7 +98,7 @@ static int phy_clear_interrupt(struct phy_device *phydev)
  * @phydev: the phy_device struct
  * @interrupts: interrupt flags to configure for this @phydev
  *
- * Returns 0 on success on < 0 on error.
+ * Returns 0 on success or < 0 on error.
  */
 static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
 {
@@ -93,15 +114,16 @@ static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
  * phy_aneg_done - return auto-negotiation status
  * @phydev: target phy_device struct
  *
- * Description: Reads the status register and returns 0 either if
- *   auto-negotiation is incomplete, or if there was an error.
- *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
  */
 static inline int phy_aneg_done(struct phy_device *phydev)
 {
-	int retval = phy_read(phydev, MII_BMSR);
+	if (phydev->drv->aneg_done)
+		return phydev->drv->aneg_done(phydev);
 
-	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+	return genphy_aneg_done(phydev);
 }
 
 /* A structure for mapping a particular speed and duplex
@@ -164,9 +186,9 @@ static const struct phy_setting settings[] = {
  *   of that setting.  Returns the index of the last setting if
  *   none of the others match.
  */
-static inline int phy_find_setting(int speed, int duplex)
+static inline unsigned int phy_find_setting(int speed, int duplex)
 {
-	int idx = 0;
+	unsigned int idx = 0;
 
 	while (idx < ARRAY_SIZE(settings) &&
 	       (settings[idx].speed != speed || settings[idx].duplex != duplex))
@@ -185,7 +207,7 @@ static inline int phy_find_setting(int speed, int duplex)
  *   the mask in features.  Returns the index of the last setting
  *   if nothing else matches.
  */
-static inline int phy_find_valid(int idx, u32 features)
+static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
 {
 	while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
 		idx++;
@@ -204,7 +226,7 @@ static inline int phy_find_valid(int idx, u32 features)
 static void phy_sanitize_settings(struct phy_device *phydev)
 {
 	u32 features = phydev->supported;
-	int idx;
+	unsigned int idx;
 
 	/* Sanitize settings based on PHY capabilities */
 	if ((features & SUPPORTED_Autoneg) == 0)
@@ -283,7 +305,10 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
 
 	ethtool_cmd_speed_set(cmd, phydev->speed);
 	cmd->duplex = phydev->duplex;
-	cmd->port = PORT_MII;
+	if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+		cmd->port = PORT_BNC;
+	else
+		cmd->port = PORT_MII;
 	cmd->phy_address = phydev->addr;
 	cmd->transceiver = phy_is_internal(phydev) ?
 		XCVR_INTERNAL : XCVR_EXTERNAL;
@@ -731,12 +756,8 @@ void phy_state_machine(struct work_struct *work)
 			netif_carrier_on(phydev->attached_dev);
 			phydev->adjust_link(phydev->attached_dev);
 
-		} else if (0 == phydev->link_timeout--) {
+		} else if (0 == phydev->link_timeout--)
 			needs_aneg = 1;
-			/* If we have the magic_aneg bit, we try again */
-			if (phydev->drv->flags & PHY_HAS_MAGICANEG)
-				break;
-		}
 		break;
 	case PHY_NOLINK:
 		err = phy_read_status(phydev);
@@ -954,7 +975,8 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 	    (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;
-		int idx, status;
+		int status;
+		unsigned int idx;
 
 		/* Read phy status to properly get the right settings */
 		status = phy_read_status(phydev);