[PATCH] sk98lin: remove /proc interface

Remove device specific proc interface. It doesn't handle
renames correctly; it ain't worth fixing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

3 files changed, 2 insertions, 308 deletions

diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
index 7653d6e33aa..afd900d5d73 100644
--- a/drivers/net/sk98lin/Makefile
+++ b/drivers/net/sk98lin/Makefile
@@ -26,8 +26,7 @@ sk98lin-objs    :=	\
 		skrlmt.o	\
 		sktimer.o	\
 		skvpd.o		\
-		skxmac2.o	\
-		skproc.o
+		skxmac2.o
 
 # DBGDEF =  \
 # -DDEBUG
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 8338d497250..e3bdb583600 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -110,7 +110,6 @@
 #include	<linux/module.h>
 #include	<linux/moduleparam.h>
 #include	<linux/init.h>
-#include 	<linux/proc_fs.h>
 #include	<linux/dma-mapping.h>
 #include	<linux/ip.h>
 
@@ -234,28 +233,6 @@ static int      SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
  * Extern Function Prototypes
  *
  ******************************************************************************/
-static const char 	SKRootName[] = "net/sk98lin";
-static struct		proc_dir_entry *pSkRootDir;
-extern struct	file_operations sk_proc_fops;
-
-static inline void SkGeProcCreate(struct net_device *dev)
-{
-	struct proc_dir_entry *pe;
-
-	if (pSkRootDir && 
-	    (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) {
-		pe->proc_fops = &sk_proc_fops;
-		pe->data = dev;
-		pe->owner = THIS_MODULE;
-	}
-}
- 
-static inline void SkGeProcRemove(struct net_device *dev)
-{
-	if (pSkRootDir)
-		remove_proc_entry(dev->name, pSkRootDir);
-}
-
 extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);	
 extern void SkDimDisplayModerationSettings(SK_AC *pAC);
 extern void SkDimStartModerationTimer(SK_AC *pAC);
@@ -4898,8 +4875,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
 	memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-	SkGeProcCreate(dev);
-
 	pNet->PortNr = 0;
 	pNet->NetNr  = 0;
 
@@ -4947,7 +4922,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
 			free_netdev(dev);
 			pAC->dev[1] = pAC->dev[0];
 		} else {
-			SkGeProcCreate(dev);
 			memcpy(&dev->dev_addr,
 					&pAC->Addr.Net[1].CurrentMacAddress, 6);
 			memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
@@ -4988,10 +4962,7 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
 	SK_AC *pAC = pNet->pAC;
 	struct net_device *otherdev = pAC->dev[1];
 
-	SkGeProcRemove(dev);
 	unregister_netdev(dev);
-	if (otherdev != dev)
-		SkGeProcRemove(otherdev);
 
 	SkGeYellowLED(pAC, pAC->IoBase, 0);
 
@@ -5136,23 +5107,12 @@ static struct pci_driver skge_driver = {
 
 static int __init skge_init(void)
 {
-	int error;
-
-	pSkRootDir = proc_mkdir(SKRootName, NULL);
-	if (pSkRootDir) 
-		pSkRootDir->owner = THIS_MODULE;
-	
-	error = pci_register_driver(&skge_driver);
-	if (error)
-		remove_proc_entry(SKRootName, NULL);
-	return error;
+	return pci_module_init(&skge_driver);
 }
 
 static void __exit skge_exit(void)
 {
 	pci_unregister_driver(&skge_driver);
-	remove_proc_entry(SKRootName, NULL);
-
 }
 
 module_init(skge_init);
diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
deleted file mode 100644
index 5cece25c034..00000000000
--- a/drivers/net/sk98lin/skproc.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/******************************************************************************
- *
- * Name:	skproc.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.11 $
- * Date:	$Date: 2003/12/11 16:03:57 $
- * Purpose:	Funktions to display statictic data
- *
- ******************************************************************************/
- 
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	Created 22-Nov-2000
- *	Author: Mirko Lindner (mlindner@syskonnect.de)
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-#include "h/skversion.h"
-
-static int sk_seq_show(struct seq_file *seq, void *v);
-static int sk_proc_open(struct inode *inode, struct file *file);
-
-struct file_operations sk_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sk_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-
-/*****************************************************************************
- *
- *      sk_seq_show - show proc information of a particular adapter
- *
- * Description:
- *  This function fills the proc entry with statistic data about 
- *  the ethernet device. It invokes the generic sk_gen_browse() to
- *  print out all items one per one.
- *  
- * Returns: 0
- *      
- */
-static int sk_seq_show(struct seq_file *seq, void *v)
-{
-	struct net_device *dev = seq->private;
-	DEV_NET			*pNet = netdev_priv(dev);
-	SK_AC			*pAC = pNet->pAC;
-	SK_PNMI_STRUCT_DATA 	*pPnmiStruct = &pAC->PnmiStruct;
-	unsigned long		Flags;	
-	unsigned int		Size;
-	char			sens_msg[50];
-	int 			t;
-	int 			i;
-
-	/* NetIndex in GetStruct is now required, zero is only dummy */
-	for (t=pAC->GIni.GIMacsFound; t > 0; t--) {
-		if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1)
-			t--;
-
-		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-		Size = SK_PNMI_STRUCT_SIZE;
-#ifdef SK_DIAG_SUPPORT
-		if (pAC->BoardLevel == SK_INIT_DATA) {
-			SK_MEMCPY(&(pAC->PnmiStruct), &(pAC->PnmiBackup), sizeof(SK_PNMI_STRUCT_DATA));
-			if (pAC->DiagModeActive == DIAG_NOTACTIVE) {
-				pAC->Pnmi.DiagAttached = SK_DIAG_IDLE;
-			}
-		} else {
-			SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1);
-		}
-#else
-		SkPnmiGetStruct(pAC, pAC->IoBase, 
-				pPnmiStruct, &Size, t-1);
-#endif
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	
-		if (pAC->dev[t-1] == dev) {
-			SK_PNMI_STAT	*pPnmiStat = &pPnmiStruct->Stat[0];
-
-			seq_printf(seq, "\nDetailed statistic for device %s\n",
-				      pAC->dev[t-1]->name);
-			seq_printf(seq, "=======================================\n");
-	
-			/* Board statistics */
-			seq_printf(seq, "\nBoard statistics\n\n");
-			seq_printf(seq, "Active Port                    %c\n",
-				      'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
-								    Net[t-1].PrefPort]->PortNumber);
-			seq_printf(seq, "Preferred Port                 %c\n",
-				      'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
-								    Net[t-1].PrefPort]->PortNumber);
-
-			seq_printf(seq, "Bus speed (MHz)                %d\n",
-				      pPnmiStruct->BusSpeed);
-
-			seq_printf(seq, "Bus width (Bit)                %d\n",
-				      pPnmiStruct->BusWidth);
-			seq_printf(seq, "Driver version                 %s\n",
-				      VER_STRING);
-			seq_printf(seq, "Hardware revision              v%d.%d\n",
-				      (pAC->GIni.GIPciHwRev >> 4) & 0x0F,
-				      pAC->GIni.GIPciHwRev & 0x0F);
-
-			/* Print sensor informations */
-			for (i=0; i < pAC->I2c.MaxSens; i ++) {
-				/* Check type */
-				switch (pAC->I2c.SenTable[i].SenType) {
-				case 1:
-					strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
-					strcat(sens_msg, " (C)");
-					seq_printf(seq, "%-25s      %d.%02d\n",
-						      sens_msg,
-						      pAC->I2c.SenTable[i].SenValue / 10,
-						      pAC->I2c.SenTable[i].SenValue % 10);
-
-					strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
-					strcat(sens_msg, " (F)");
-					seq_printf(seq, "%-25s      %d.%02d\n",
-						      sens_msg,
-						      ((((pAC->I2c.SenTable[i].SenValue)
-							 *10)*9)/5 + 3200)/100,
-						      ((((pAC->I2c.SenTable[i].SenValue)
-							 *10)*9)/5 + 3200) % 10);
-					break;
-				case 2:
-					strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
-					strcat(sens_msg, " (V)");
-					seq_printf(seq, "%-25s      %d.%03d\n",
-						      sens_msg,
-						      pAC->I2c.SenTable[i].SenValue / 1000,
-						      pAC->I2c.SenTable[i].SenValue % 1000);
-					break;
-				case 3:
-					strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
-					strcat(sens_msg, " (rpm)");
-					seq_printf(seq, "%-25s      %d\n",
-						      sens_msg,
-						      pAC->I2c.SenTable[i].SenValue);
-					break;
-				default:
-					break;
-				}
-			}
-				
-			/*Receive statistics */
-			seq_printf(seq, "\nReceive statistics\n\n");
-
-			seq_printf(seq, "Received bytes                 %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxOctetsOkCts);
-			seq_printf(seq, "Received packets               %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxOkCts);
-#if 0
-			if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && 
-			    pAC->HWRevision < 12) {
-				pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - 
-					pPnmiStat->StatRxShortsCts;
-				pPnmiStat->StatRxShortsCts = 0;
-			}
-#endif
-			if (dev->mtu > 1500)
-				pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
-					pPnmiStat->StatRxTooLongCts;
-
-			seq_printf(seq, "Receive errors                 %Lu\n",
-				      (unsigned long long) pPnmiStruct->InErrorsCts);
-			seq_printf(seq, "Receive dropped                %Lu\n",
-				      (unsigned long long) pPnmiStruct->RxNoBufCts);
-			seq_printf(seq, "Received multicast             %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxMulticastOkCts);
-			seq_printf(seq, "Receive error types\n");
-			seq_printf(seq, "   length                      %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxRuntCts);
-			seq_printf(seq, "   buffer overflow             %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxFifoOverflowCts);
-			seq_printf(seq, "   bad crc                     %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxFcsCts);
-			seq_printf(seq, "   framing                     %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxFramingCts);
-			seq_printf(seq, "   missed frames               %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxMissedCts);
-
-			if (dev->mtu > 1500)
-				pPnmiStat->StatRxTooLongCts = 0;
-
-			seq_printf(seq, "   too long                    %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxTooLongCts);					
-			seq_printf(seq, "   carrier extension           %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxCextCts);				
-			seq_printf(seq, "   too short                   %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxShortsCts);				
-			seq_printf(seq, "   symbol                      %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxSymbolCts);				
-			seq_printf(seq, "   LLC MAC size                %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxIRLengthCts);				
-			seq_printf(seq, "   carrier event               %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxCarrierCts);				
-			seq_printf(seq, "   jabber                      %Lu\n",
-				      (unsigned long long) pPnmiStat->StatRxJabberCts);				
-
-
-			/*Transmit statistics */
-			seq_printf(seq, "\nTransmit statistics\n\n");
-				
-			seq_printf(seq, "Transmited bytes               %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxOctetsOkCts);
-			seq_printf(seq, "Transmited packets             %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxOkCts);
-			seq_printf(seq, "Transmit errors                %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
-			seq_printf(seq, "Transmit dropped               %Lu\n",
-				      (unsigned long long) pPnmiStruct->TxNoBufCts);
-			seq_printf(seq, "Transmit collisions            %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
-			seq_printf(seq, "Transmit error types\n");
-			seq_printf(seq, "   excessive collision         %ld\n",
-				      pAC->stats.tx_aborted_errors);
-			seq_printf(seq, "   carrier                     %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxCarrierCts);
-			seq_printf(seq, "   fifo underrun               %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxFifoUnderrunCts);
-			seq_printf(seq, "   heartbeat                   %Lu\n",
-				      (unsigned long long) pPnmiStat->StatTxCarrierCts);
-			seq_printf(seq, "   window                      %ld\n",
-				      pAC->stats.tx_window_errors);
-				
-		}
-	}
-	return 0;
-}
-
-/*****************************************************************************
- *
- *      sk_proc_open - register the show function when proc is open'ed
- *  
- * Description:
- *  This function is called whenever a sk98lin proc file is queried.
- *  
- * Returns: the return value of single_open()
- *      
- */
-static int sk_proc_open(struct inode *inode, struct file *file)
-{
-    return single_open(file, sk_seq_show, PDE(inode)->data);
-}
-
-/*******************************************************************************
- *
- * End of file
- *
- ******************************************************************************/