netdev: add more functions to netdevice ops

This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 31 insertions, 14 deletions

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4b97cb60136..9ba18e1bc34 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12614,19 +12614,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	else
 		tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
 
-	/* All chips before 5787 can get confused if TX buffers
-	 * straddle the 4GB address boundary in some cases.
-	 */
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
-		tp->dev->hard_start_xmit = tg3_start_xmit;
-	else
-		tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug;
-
 	tp->rx_offset = 2;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
 	    (tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0)
@@ -13346,6 +13333,26 @@ static void __devinit tg3_init_coal(struct tg3 *tp)
 static const struct net_device_ops tg3_netdev_ops = {
 	.ndo_open		= tg3_open,
 	.ndo_stop		= tg3_close,
+	.ndo_start_xmit		= tg3_start_xmit,
+	.ndo_get_stats		= tg3_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list	= tg3_set_rx_mode,
+	.ndo_set_mac_address	= tg3_set_mac_addr,
+	.ndo_do_ioctl		= tg3_ioctl,
+	.ndo_tx_timeout		= tg3_tx_timeout,
+	.ndo_change_mtu		= tg3_change_mtu,
+#if TG3_VLAN_TAG_USED
+	.ndo_vlan_rx_register	= tg3_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= tg3_poll_controller,
+#endif
+};
+
+static const struct net_device_ops tg3_netdev_ops_dma_bug = {
+	.ndo_open		= tg3_open,
+	.ndo_stop		= tg3_close,
+	.ndo_start_xmit		= tg3_start_xmit_dma_bug,
 	.ndo_get_stats		= tg3_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list	= tg3_set_rx_mode,
@@ -13475,7 +13482,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
 	tp->tx_pending = TG3_DEF_TX_RING_PENDING;
 
-	dev->netdev_ops = &tg3_netdev_ops;
 	netif_napi_add(dev, &tp->napi, tg3_poll, 64);
 	dev->ethtool_ops = &tg3_ethtool_ops;
 	dev->watchdog_timeo = TG3_TX_TIMEOUT;
@@ -13488,6 +13494,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+		dev->netdev_ops = &tg3_netdev_ops;
+	else
+		dev->netdev_ops = &tg3_netdev_ops_dma_bug;
+
+
 	/* The EPB bridge inside 5714, 5715, and 5780 and any
 	 * device behind the EPB cannot support DMA addresses > 40-bit.
 	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.