summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath10k/mac.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-13 17:40:34 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-13 17:40:34 +0900
commit42a2d923cc349583ebf6fdd52a7d35e1c2f7e6bd (patch)
tree2b2b0c03b5389c1301800119333967efafd994ca /drivers/net/wireless/ath/ath10k/mac.c
parent5cbb3d216e2041700231bcfc383ee5f8b7fc8b74 (diff)
parent75ecab1df14d90e86cebef9ec5c76befde46e65f (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) The addition of nftables. No longer will we need protocol aware firewall filtering modules, it can all live in userspace. At the core of nftables is a, for lack of a better term, virtual machine that executes byte codes to inspect packet or metadata (arriving interface index, etc.) and make verdict decisions. Besides support for loading packet contents and comparing them, the interpreter supports lookups in various datastructures as fundamental operations. For example sets are supports, and therefore one could create a set of whitelist IP address entries which have ACCEPT verdicts attached to them, and use the appropriate byte codes to do such lookups. Since the interpreted code is composed in userspace, userspace can do things like optimize things before giving it to the kernel. Another major improvement is the capability of atomically updating portions of the ruleset. In the existing netfilter implementation, one has to update the entire rule set in order to make a change and this is very expensive. Userspace tools exist to create nftables rules using existing netfilter rule sets, but both kernel implementations will need to co-exist for quite some time as we transition from the old to the new stuff. Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have worked so hard on this. 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements to our pseudo-random number generator, mostly used for things like UDP port randomization and netfitler, amongst other things. In particular the taus88 generater is updated to taus113, and test cases are added. 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet and Yang Yingliang. 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin Sujir. 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet, Neal Cardwell, and Yuchung Cheng. 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary control message data, much like other socket option attributes. From Francesco Fusco. 7) Allow applications to specify a cap on the rate computed automatically by the kernel for pacing flows, via a new SO_MAX_PACING_RATE socket option. From Eric Dumazet. 8) Make the initial autotuned send buffer sizing in TCP more closely reflect actual needs, from Eric Dumazet. 9) Currently early socket demux only happens for TCP sockets, but we can do it for connected UDP sockets too. Implementation from Shawn Bohrer. 10) Refactor inet socket demux with the goal of improving hash demux performance for listening sockets. With the main goals being able to use RCU lookups on even request sockets, and eliminating the listening lock contention. From Eric Dumazet. 11) The bonding layer has many demuxes in it's fast path, and an RCU conversion was started back in 3.11, several changes here extend the RCU usage to even more locations. From Ding Tianhong and Wang Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav Falico. 12) Allow stackability of segmentation offloads to, in particular, allow segmentation offloading over tunnels. From Eric Dumazet. 13) Significantly improve the handling of secret keys we input into the various hash functions in the inet hashtables, TCP fast open, as well as syncookies. From Hannes Frederic Sowa. The key fundamental operation is "net_get_random_once()" which uses static keys. Hannes even extended this to ipv4/ipv6 fragmentation handling and our generic flow dissector. 14) The generic driver layer takes care now to set the driver data to NULL on device removal, so it's no longer necessary for drivers to explicitly set it to NULL any more. Many drivers have been cleaned up in this way, from Jingoo Han. 15) Add a BPF based packet scheduler classifier, from Daniel Borkmann. 16) Improve CRC32 interfaces and generic SKB checksum iterators so that SCTP's checksumming can more cleanly be handled. Also from Daniel Borkmann. 17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces using the interface MTU value. This helps avoid PMTU attacks, particularly on DNS servers. From Hannes Frederic Sowa. 18) Use generic XPS for transmit queue steering rather than internal (re-)implementation in virtio-net. From Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) random32: add test cases for taus113 implementation random32: upgrade taus88 generator to taus113 from errata paper random32: move rnd_state to linux/random.h random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized random32: add periodic reseeding random32: fix off-by-one in seeding requirement PHY: Add RTL8201CP phy_driver to realtek xtsonic: add missing platform_set_drvdata() in xtsonic_probe() macmace: add missing platform_set_drvdata() in mace_probe() ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe() ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh vlan: Implement vlan_dev_get_egress_qos_mask as an inline. ixgbe: add warning when max_vfs is out of range. igb: Update link modes display in ethtool netfilter: push reasm skb through instead of original frag skbs ip6_output: fragment outgoing reassembled skb properly MAINTAINERS: mv643xx_eth: take over maintainership from Lennart net_sched: tbf: support of 64bit rates ixgbe: deleting dfwd stations out of order can cause null ptr deref ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS ...
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/mac.c')
-rw-r--r--drivers/net/wireless/ath/ath10k/mac.c732
1 files changed, 429 insertions, 303 deletions
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index cf2ba4d850c..0b1cc516e77 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -334,25 +334,29 @@ static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value)
{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
if (value != 0xFFFFFFFF)
value = min_t(u32, arvif->ar->hw->wiphy->rts_threshold,
ATH10K_RTS_MAX);
- return ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_RTS_THRESHOLD,
- value);
+ vdev_param = ar->wmi.vdev_param->rts_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}
static int ath10k_mac_set_frag(struct ath10k_vif *arvif, u32 value)
{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
if (value != 0xFFFFFFFF)
value = clamp_t(u32, arvif->ar->hw->wiphy->frag_threshold,
ATH10K_FRAGMT_THRESHOLD_MIN,
ATH10K_FRAGMT_THRESHOLD_MAX);
- return ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
- value);
+ vdev_param = ar->wmi.vdev_param->fragmentation_threshold;
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value);
}
static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
@@ -460,6 +464,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
arg.ssid_len = arvif->vif->bss_conf.ssid_len;
}
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d start center_freq %d phymode %s\n",
+ arg.vdev_id, arg.channel.freq,
+ ath10k_wmi_phymode_str(arg.channel.mode));
+
ret = ath10k_wmi_vdev_start(ar, &arg);
if (ret) {
ath10k_warn("WMI vdev start failed: ret %d\n", ret);
@@ -503,13 +512,10 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
{
struct ieee80211_channel *channel = ar->hw->conf.chandef.chan;
struct wmi_vdev_start_request_arg arg = {};
- enum nl80211_channel_type type;
int ret = 0;
lockdep_assert_held(&ar->conf_mutex);
- type = cfg80211_get_chandef_type(&ar->hw->conf.chandef);
-
arg.vdev_id = vdev_id;
arg.channel.freq = channel->center_freq;
arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
@@ -560,12 +566,9 @@ static int ath10k_monitor_stop(struct ath10k *ar)
lockdep_assert_held(&ar->conf_mutex);
- /* For some reasons, ath10k_wmi_vdev_down() here couse
- * often ath10k_wmi_vdev_stop() to fail. Next we could
- * not run monitor vdev and driver reload
- * required. Don't see such problems we skip
- * ath10k_wmi_vdev_down() here.
- */
+ ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn("Monitor vdev down failed: %d\n", ret);
ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
if (ret)
@@ -607,7 +610,7 @@ static int ath10k_monitor_create(struct ath10k *ar)
goto vdev_fail;
}
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
ar->monitor_vdev_id);
ar->monitor_present = true;
@@ -639,7 +642,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
ar->monitor_present = false;
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
ar->monitor_vdev_id);
return ret;
}
@@ -668,13 +671,14 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
arvif->vdev_id);
return;
}
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
}
static void ath10k_control_ibss(struct ath10k_vif *arvif,
struct ieee80211_bss_conf *info,
const u8 self_peer[ETH_ALEN])
{
+ u32 vdev_param;
int ret = 0;
lockdep_assert_held(&arvif->ar->conf_mutex);
@@ -708,8 +712,8 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
return;
}
- ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
- WMI_VDEV_PARAM_ATIM_WINDOW,
+ vdev_param = arvif->ar->wmi.vdev_param->atim_window;
+ ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param,
ATH10K_DEFAULT_ATIM);
if (ret)
ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n",
@@ -719,47 +723,45 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
/*
* Review this when mac80211 gains per-interface powersave support.
*/
-static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
{
- struct ath10k_generic_iter *ar_iter = data;
- struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_conf *conf = &ar->hw->conf;
enum wmi_sta_powersave_param param;
enum wmi_sta_ps_mode psmode;
int ret;
lockdep_assert_held(&arvif->ar->conf_mutex);
- if (vif->type != NL80211_IFTYPE_STATION)
- return;
+ if (arvif->vif->type != NL80211_IFTYPE_STATION)
+ return 0;
if (conf->flags & IEEE80211_CONF_PS) {
psmode = WMI_STA_PS_MODE_ENABLED;
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
- ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
- arvif->vdev_id,
- param,
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
conf->dynamic_ps_timeout);
if (ret) {
ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
arvif->vdev_id);
- return;
+ return ret;
}
-
- ar_iter->ret = ret;
} else {
psmode = WMI_STA_PS_MODE_DISABLED;
}
- ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
- psmode);
- if (ar_iter->ret)
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+ arvif->vdev_id, psmode ? "enable" : "disable");
+
+ ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
+ if (ret) {
ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
psmode, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
- psmode, arvif->vdev_id);
+ return ret;
+ }
+
+ return 0;
}
/**********************/
@@ -949,7 +951,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
arg->peer_ht_rates.num_rates = n;
arg->peer_num_spatial_streams = max((n+7) / 8, 1);
- ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+ arg->addr,
arg->peer_ht_rates.num_rates,
arg->peer_num_spatial_streams);
}
@@ -969,11 +972,11 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
arg->peer_flags |= WMI_PEER_QOS;
if (sta->wme && sta->uapsd_queues) {
- ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
sta->uapsd_queues, sta->max_sp);
arg->peer_flags |= WMI_PEER_APSD;
- arg->peer_flags |= WMI_RC_UAPSD_FLAG;
+ arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG;
if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
@@ -1028,14 +1031,27 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
struct wmi_peer_assoc_complete_arg *arg)
{
const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+ u8 ampdu_factor;
if (!vht_cap->vht_supported)
return;
arg->peer_flags |= WMI_PEER_VHT;
-
arg->peer_vht_caps = vht_cap->cap;
+
+ ampdu_factor = (vht_cap->cap &
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
+
+ /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
+ * zero in VHT IE. Using it would result in degraded throughput.
+ * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
+ * it if VHT max_mpdu is smaller. */
+ arg->peer_max_mpdu = max(arg->peer_max_mpdu,
+ (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+ ampdu_factor)) - 1);
+
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
arg->peer_flags |= WMI_PEER_80MHZ;
@@ -1048,7 +1064,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
arg->peer_vht_rates.tx_mcs_set =
__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
- ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+ sta->addr, arg->peer_max_mpdu, arg->peer_flags);
}
static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -1076,8 +1093,6 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
{
enum wmi_phy_mode phymode = MODE_UNKNOWN;
- /* FIXME: add VHT */
-
switch (ar->hw->conf.chandef.chan->band) {
case IEEE80211_BAND_2GHZ:
if (sta->ht_cap.ht_supported) {
@@ -1091,7 +1106,17 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
break;
case IEEE80211_BAND_5GHZ:
- if (sta->ht_cap.ht_supported) {
+ /*
+ * Check VHT first.
+ */
+ if (sta->vht_cap.vht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+ phymode = MODE_11AC_VHT80;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11AC_VHT40;
+ else if (sta->bandwidth == IEEE80211_STA_RX_BW_20)
+ phymode = MODE_11AC_VHT20;
+ } else if (sta->ht_cap.ht_supported) {
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
phymode = MODE_11NA_HT40;
else
@@ -1105,30 +1130,32 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
break;
}
+ ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+ sta->addr, ath10k_wmi_phymode_str(phymode));
+
arg->peer_phymode = phymode;
WARN_ON(phymode == MODE_UNKNOWN);
}
-static int ath10k_peer_assoc(struct ath10k *ar,
- struct ath10k_vif *arvif,
- struct ieee80211_sta *sta,
- struct ieee80211_bss_conf *bss_conf)
+static int ath10k_peer_assoc_prepare(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf,
+ struct wmi_peer_assoc_complete_arg *arg)
{
- struct wmi_peer_assoc_complete_arg arg;
-
lockdep_assert_held(&ar->conf_mutex);
- memset(&arg, 0, sizeof(struct wmi_peer_assoc_complete_arg));
+ memset(arg, 0, sizeof(*arg));
- ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, &arg);
- ath10k_peer_assoc_h_crypto(ar, arvif, &arg);
- ath10k_peer_assoc_h_rates(ar, sta, &arg);
- ath10k_peer_assoc_h_ht(ar, sta, &arg);
- ath10k_peer_assoc_h_vht(ar, sta, &arg);
- ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, &arg);
- ath10k_peer_assoc_h_phymode(ar, arvif, sta, &arg);
+ ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, arg);
+ ath10k_peer_assoc_h_crypto(ar, arvif, arg);
+ ath10k_peer_assoc_h_rates(ar, sta, arg);
+ ath10k_peer_assoc_h_ht(ar, sta, arg);
+ ath10k_peer_assoc_h_vht(ar, sta, arg);
+ ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, arg);
+ ath10k_peer_assoc_h_phymode(ar, arvif, sta, arg);
- return ath10k_wmi_peer_assoc(ar, &arg);
+ return 0;
}
/* can be called only in mac80211 callbacks due to `key_count` usage */
@@ -1138,6 +1165,7 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
{
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_peer_assoc_complete_arg peer_arg;
struct ieee80211_sta *ap_sta;
int ret;
@@ -1153,24 +1181,33 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
return;
}
- ret = ath10k_peer_assoc(ar, arvif, ap_sta, bss_conf);
+ ret = ath10k_peer_assoc_prepare(ar, arvif, ap_sta,
+ bss_conf, &peer_arg);
if (ret) {
- ath10k_warn("Peer assoc failed for %pM\n", bss_conf->bssid);
+ ath10k_warn("Peer assoc prepare failed for %pM\n: %d",
+ bss_conf->bssid, ret);
rcu_read_unlock();
return;
}
rcu_read_unlock();
+ ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
+ if (ret) {
+ ath10k_warn("Peer assoc failed for %pM\n: %d",
+ bss_conf->bssid, ret);
+ return;
+ }
+
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d up (associated) bssid %pM aid %d\n",
+ arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
bss_conf->bssid);
if (ret)
ath10k_warn("VDEV: %d up failed: ret %d\n",
arvif->vdev_id, ret);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "VDEV: %d associated, BSSID: %pM, AID: %d\n",
- arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
}
/*
@@ -1191,10 +1228,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
* No idea why this happens, even though VDEV-DOWN is supposed
* to be analogous to link down, so just stop the VDEV.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
+ arvif->vdev_id);
+
+ /* FIXME: check return value */
ret = ath10k_vdev_stop(arvif);
- if (!ret)
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
- arvif->vdev_id);
/*
* If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
@@ -1203,26 +1241,33 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
* interfaces as it expects there is no rx when no interface is
* running.
*/
- ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
- if (ret)
- ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
- arvif->vdev_id, ret);
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
- ath10k_wmi_flush_tx(ar);
+ /* FIXME: why don't we print error if wmi call fails? */
+ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
- arvif->def_wep_key_index = 0;
+ arvif->def_wep_key_idx = 0;
}
static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
struct ieee80211_sta *sta)
{
+ struct wmi_peer_assoc_complete_arg peer_arg;
int ret = 0;
lockdep_assert_held(&ar->conf_mutex);
- ret = ath10k_peer_assoc(ar, arvif, sta, NULL);
+ ret = ath10k_peer_assoc_prepare(ar, arvif, sta, NULL, &peer_arg);
+ if (ret) {
+ ath10k_warn("WMI peer assoc prepare failed for %pM\n",
+ sta->addr);
+ return ret;
+ }
+
+ ret = ath10k_wmi_peer_assoc(ar, &peer_arg);
if (ret) {
- ath10k_warn("WMI peer assoc failed for %pM\n", sta->addr);
+ ath10k_warn("Peer assoc failed for STA %pM\n: %d",
+ sta->addr, ret);
return ret;
}
@@ -1333,8 +1378,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
continue;
ath10k_dbg(ATH10K_DBG_WMI,
- "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
- __func__, ch - arg.channels, arg.n_channels,
+ "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+ ch - arg.channels, arg.n_channels,
ch->freq, ch->max_power, ch->max_reg_power,
ch->max_antenna_gain, ch->mode);
@@ -1391,6 +1436,33 @@ static void ath10k_reg_notifier(struct wiphy *wiphy,
/* TX handlers */
/***************/
+static u8 ath10k_tx_h_get_tid(struct ieee80211_hdr *hdr)
+{
+ if (ieee80211_is_mgmt(hdr->frame_control))
+ return HTT_DATA_TX_EXT_TID_MGMT;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+ if (!is_unicast_ether_addr(ieee80211_get_DA(hdr)))
+ return HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+
+ return ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar,
+ struct ieee80211_tx_info *info)
+{
+ if (info->control.vif)
+ return ath10k_vif_to_arvif(info->control.vif)->vdev_id;
+
+ if (ar->monitor_enabled)
+ return ar->monitor_vdev_id;
+
+ ath10k_warn("could not resolve vdev id\n");
+ return 0;
+}
+
/*
* Frames sent to the FW have to be in "Native Wifi" format.
* Strip the QoS field from the 802.11 header.
@@ -1411,6 +1483,30 @@ static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw,
skb_pull(skb, IEEE80211_QOS_CTL_LEN);
}
+static void ath10k_tx_wep_key_work(struct work_struct *work)
+{
+ struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
+ wep_key_work);
+ int ret, keyidx = arvif->def_wep_key_newidx;
+
+ if (arvif->def_wep_key_idx == keyidx)
+ return;
+
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
+ arvif->vdev_id, keyidx);
+
+ ret = ath10k_wmi_vdev_set_param(arvif->ar,
+ arvif->vdev_id,
+ arvif->ar->wmi.vdev_param->def_keyid,
+ keyidx);
+ if (ret) {
+ ath10k_warn("could not update wep keyidx (%d)\n", ret);
+ return;
+ }
+
+ arvif->def_wep_key_idx = keyidx;
+}
+
static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -1419,11 +1515,6 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
struct ath10k *ar = arvif->ar;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_key_conf *key = info->control.hw_key;
- int ret;
-
- /* TODO AP mode should be implemented */
- if (vif->type != NL80211_IFTYPE_STATION)
- return;
if (!ieee80211_has_protected(hdr->frame_control))
return;
@@ -1435,20 +1526,14 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
key->cipher != WLAN_CIPHER_SUITE_WEP104)
return;
- if (key->keyidx == arvif->def_wep_key_index)
+ if (key->keyidx == arvif->def_wep_key_idx)
return;
- ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
-
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_DEF_KEYID,
- key->keyidx);
- if (ret) {
- ath10k_warn("could not update wep keyidx (%d)\n", ret);
- return;
- }
-
- arvif->def_wep_key_index = key->keyidx;
+ /* FIXME: Most likely a few frames will be TXed with an old key. Simply
+ * queueing frames until key index is updated is not an option because
+ * sk_buff may need more processing to be done, e.g. offchannel */
+ arvif->def_wep_key_newidx = key->keyidx;
+ ieee80211_queue_work(ar->hw, &arvif->wep_key_work);
}
static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
@@ -1478,19 +1563,42 @@ static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int ret;
+ int ret = 0;
- if (ieee80211_is_mgmt(hdr->frame_control))
- ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else if (ieee80211_is_nullfunc(hdr->frame_control))
+ if (ar->htt.target_version_major >= 3) {
+ /* Since HTT 3.0 there is no separate mgmt tx command */
+ ret = ath10k_htt_tx(&ar->htt, skb);
+ goto exit;
+ }
+
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+ if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features)) {
+ if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
+ ATH10K_MAX_NUM_MGMT_PENDING) {
+ ath10k_warn("wmi mgmt_tx queue limit reached\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
+ ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+ } else {
+ ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+ }
+ } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features) &&
+ ieee80211_is_nullfunc(hdr->frame_control)) {
/* FW does not report tx status properly for NullFunc frames
* unless they are sent through mgmt tx path. mac80211 sends
- * those frames when it detects link/beacon loss and depends on
- * the tx status to be correct. */
+ * those frames when it detects link/beacon loss and depends
+ * on the tx status to be correct. */
ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else
+ } else {
ret = ath10k_htt_tx(&ar->htt, skb);
+ }
+exit:
if (ret) {
ath10k_warn("tx failed (%d). dropping packet.\n", ret);
ieee80211_free_txskb(ar->hw, skb);
@@ -1534,18 +1642,19 @@ void ath10k_offchan_tx_work(struct work_struct *work)
mutex_lock(&ar->conf_mutex);
- ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n",
skb);
hdr = (struct ieee80211_hdr *)skb->data;
peer_addr = ieee80211_get_DA(hdr);
- vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+ vdev_id = ATH10K_SKB_CB(skb)->vdev_id;
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find(ar, vdev_id, peer_addr);
spin_unlock_bh(&ar->data_lock);
if (peer)
+ /* FIXME: should this use ath10k_warn()? */
ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
peer_addr, vdev_id);
@@ -1580,6 +1689,36 @@ void ath10k_offchan_tx_work(struct work_struct *work)
}
}
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
+ struct sk_buff *skb;
+ int ret;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ret = ath10k_wmi_mgmt_tx(ar, skb);
+ if (ret)
+ ath10k_warn("wmi mgmt_tx failed (%d)\n", ret);
+ }
+}
+
/************/
/* Scanning */
/************/
@@ -1643,8 +1782,6 @@ static int ath10k_abort_scan(struct ath10k *ar)
return -EIO;
}
- ath10k_wmi_flush_tx(ar);
-
ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
if (ret == 0)
ath10k_warn("timed out while waiting for scan to stop\n");
@@ -1678,10 +1815,6 @@ static int ath10k_start_scan(struct ath10k *ar,
if (ret)
return ret;
- /* make sure we submit the command so the completion
- * timeout makes sense */
- ath10k_wmi_flush_tx(ar);
-
ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
if (ret == 0) {
ath10k_abort_scan(ar);
@@ -1709,16 +1842,7 @@ static void ath10k_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath10k *ar = hw->priv;
- struct ath10k_vif *arvif = NULL;
- u32 vdev_id = 0;
- u8 tid;
-
- if (info->control.vif) {
- arvif = ath10k_vif_to_arvif(info->control.vif);
- vdev_id = arvif->vdev_id;
- } else if (ar->monitor_enabled) {
- vdev_id = ar->monitor_vdev_id;
- }
+ u8 tid, vdev_id;
/* We should disable CCK RATE due to P2P */
if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
@@ -1726,12 +1850,8 @@ static void ath10k_tx(struct ieee80211_hw *hw,
/* we must calculate tid before we apply qos workaround
* as we'd lose the qos control field */
- tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
- if (ieee80211_is_data_qos(hdr->frame_control) &&
- is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- }
+ tid = ath10k_tx_h_get_tid(hdr);
+ vdev_id = ath10k_tx_h_get_vdev_id(ar, info);
/* it makes no sense to process injected frames like that */
if (info->control.vif &&
@@ -1742,14 +1862,14 @@ static void ath10k_tx(struct ieee80211_hw *hw,
ath10k_tx_h_seq_no(skb);
}
- memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb)));
- ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
+ ATH10K_SKB_CB(skb)->vdev_id = vdev_id;
+ ATH10K_SKB_CB(skb)->htt.is_offchan = false;
ATH10K_SKB_CB(skb)->htt.tid = tid;
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
spin_lock_bh(&ar->data_lock);
ATH10K_SKB_CB(skb)->htt.is_offchan = true;
- ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+ ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
spin_unlock_bh(&ar->data_lock);
ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
@@ -1771,6 +1891,7 @@ void ath10k_halt(struct ath10k *ar)
del_timer_sync(&ar->scan.timeout);
ath10k_offchan_tx_purge(ar);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
ath10k_peer_cleanup_all(ar);
ath10k_core_stop(ar);
ath10k_hif_power_down(ar);
@@ -1817,12 +1938,12 @@ static int ath10k_start(struct ieee80211_hw *hw)
else if (ar->state == ATH10K_STATE_RESTARTING)
ar->state = ATH10K_STATE_RESTARTED;
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
if (ret)
ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
ret);
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0);
if (ret)
ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
ret);
@@ -1847,32 +1968,29 @@ static void ath10k_stop(struct ieee80211_hw *hw)
ar->state = ATH10K_STATE_OFF;
mutex_unlock(&ar->conf_mutex);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
+
cancel_work_sync(&ar->offchan_tx_work);
+ cancel_work_sync(&ar->wmi_mgmt_tx_work);
cancel_work_sync(&ar->restart_work);
}
-static void ath10k_config_ps(struct ath10k *ar)
+static int ath10k_config_ps(struct ath10k *ar)
{
- struct ath10k_generic_iter ar_iter;
+ struct ath10k_vif *arvif;
+ int ret = 0;
lockdep_assert_held(&ar->conf_mutex);
- /* During HW reconfiguration mac80211 reports all interfaces that were
- * running until reconfiguration was started. Since FW doesn't have any
- * vdevs at this point we must not iterate over this interface list.
- * This setting will be updated upon add_interface(). */
- if (ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
-
- ieee80211_iterate_active_interfaces_atomic(
- ar->hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_ps_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ret = ath10k_mac_vif_setup_ps(arvif);
+ if (ret) {
+ ath10k_warn("could not setup powersave (%d)\n", ret);
+ break;
+ }
+ }
- if (ar_iter.ret)
- ath10k_warn("failed to set ps config (%d)\n", ar_iter.ret);
+ return ret;
}
static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
@@ -1884,7 +2002,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&ar->conf_mutex);
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
conf->chandef.chan->center_freq);
spin_lock_bh(&ar->data_lock);
ar->rx_channel = conf->chandef.chan;
@@ -1901,7 +2019,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
ret = ath10k_monitor_destroy(ar);
}
- ath10k_wmi_flush_tx(ar);
mutex_unlock(&ar->conf_mutex);
return ret;
}
@@ -1922,6 +2039,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
int ret = 0;
u32 value;
int bit;
+ u32 vdev_param;
mutex_lock(&ar->conf_mutex);
@@ -1930,21 +2048,22 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
arvif->ar = ar;
arvif->vif = vif;
+ INIT_WORK(&arvif->wep_key_work, ath10k_tx_wep_key_work);
+
if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
ath10k_warn("Only one monitor interface allowed\n");
ret = -EBUSY;
- goto exit;
+ goto err;
}
bit = ffs(ar->free_vdev_map);
if (bit == 0) {
ret = -EBUSY;
- goto exit;
+ goto err;
}
arvif->vdev_id = bit - 1;
arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
- ar->free_vdev_map &= ~(1 << arvif->vdev_id);
if (ar->p2p)
arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
@@ -1973,32 +2092,41 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
break;
}
- ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n",
arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
arvif->vdev_subtype, vif->addr);
if (ret) {
ath10k_warn("WMI vdev create failed: ret %d\n", ret);
- goto exit;
+ goto err;
}
- ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID,
- arvif->def_wep_key_index);
- if (ret)
+ ar->free_vdev_map &= ~BIT(arvif->vdev_id);
+ list_add(&arvif->list, &ar->arvifs);
+
+ vdev_param = ar->wmi.vdev_param->def_keyid;
+ ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
+ arvif->def_wep_key_idx);
+ if (ret) {
ath10k_warn("Failed to set default keyid: %d\n", ret);
+ goto err_vdev_delete;
+ }
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+ vdev_param = ar->wmi.vdev_param->tx_encap_type;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
ATH10K_HW_TXRX_NATIVE_WIFI);
- if (ret)
+ /* 10.X firmware does not support this VDEV parameter. Do not warn */
+ if (ret && ret != -EOPNOTSUPP) {
ath10k_warn("Failed to set TX encap: %d\n", ret);
+ goto err_vdev_delete;
+ }
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
if (ret) {
ath10k_warn("Failed to create peer for AP: %d\n", ret);
- goto exit;
+ goto err_vdev_delete;
}
}
@@ -2007,39 +2135,62 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
param, value);
- if (ret)
+ if (ret) {
ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+ goto err_peer_delete;
+ }
param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
param, value);
- if (ret)
+ if (ret) {
ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+ goto err_peer_delete;
+ }
param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
param, value);
- if (ret)
+ if (ret) {
ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+ goto err_peer_delete;
+ }
}
ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold);
- if (ret)
+ if (ret) {
ath10k_warn("failed to set rts threshold for vdev %d (%d)\n",
arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
ret = ath10k_mac_set_frag(arvif, ar->hw->wiphy->frag_threshold);
- if (ret)
+ if (ret) {
ath10k_warn("failed to set frag threshold for vdev %d (%d)\n",
arvif->vdev_id, ret);
+ goto err_peer_delete;
+ }
if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
ar->monitor_present = true;
-exit:
mutex_unlock(&ar->conf_mutex);
+ return 0;
+
+err_peer_delete:
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP)
+ ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr);
+
+err_vdev_delete:
+ ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+ ar->free_vdev_map &= ~BIT(arvif->vdev_id);
+ list_del(&arvif->list);
+
+err:
+ mutex_unlock(&ar->conf_mutex);
+
return ret;
}
@@ -2052,9 +2203,17 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
- ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
+ cancel_work_sync(&arvif->wep_key_work);
+
+ spin_lock_bh(&ar->data_lock);
+ if (arvif->beacon) {
+ dev_kfree_skb_any(arvif->beacon);
+ arvif->beacon = NULL;
+ }
+ spin_unlock_bh(&ar->data_lock);
ar->free_vdev_map |= 1 << (arvif->vdev_id);
+ list_del(&arvif->list);
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
@@ -2064,6 +2223,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
kfree(arvif->u.ap.noa_data);
}
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+ arvif->vdev_id);
+
ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
if (ret)
ath10k_warn("WMI vdev delete failed: %d\n", ret);
@@ -2105,18 +2267,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
!ar->monitor_enabled) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
+ ar->monitor_vdev_id);
+
ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
if (ret)
ath10k_warn("Unable to start monitor mode\n");
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
ar->monitor_enabled) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
+ ar->monitor_vdev_id);
+
ret = ath10k_monitor_stop(ar);
if (ret)
ath10k_warn("Unable to stop monitor mode\n");
- else
- ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
}
mutex_unlock(&ar->conf_mutex);
@@ -2130,6 +2294,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
int ret = 0;
+ u32 vdev_param, pdev_param;
mutex_lock(&ar->conf_mutex);
@@ -2138,44 +2303,44 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BEACON_INT) {
arvif->beacon_interval = info->beacon_int;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_BEACON_INTERVAL,
+ vdev_param = ar->wmi.vdev_param->beacon_interval;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
arvif->beacon_interval);
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d beacon_interval %d\n",
+ arvif->vdev_id, arvif->beacon_interval);
+
if (ret)
ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Beacon interval: %d set for VDEV: %d\n",
- arvif->beacon_interval, arvif->vdev_id);
}
if (changed & BSS_CHANGED_BEACON) {
- ret = ath10k_wmi_pdev_set_param(ar,
- WMI_PDEV_PARAM_BEACON_TX_MODE,
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "vdev %d set beacon tx mode to staggered\n",
+ arvif->vdev_id);
+
+ pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
WMI_BEACON_STAGGERED_MODE);
if (ret)
ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set staggered beacon mode for VDEV: %d\n",
- arvif->vdev_id);
}
if (changed & BSS_CHANGED_BEACON_INFO) {
arvif->dtim_period = info->dtim_period;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_DTIM_PERIOD,
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d dtim_period %d\n",
+ arvif->vdev_id, arvif->dtim_period);
+
+ vdev_param = ar->wmi.vdev_param->dtim_period;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
arvif->dtim_period);
if (ret)
ath10k_warn("Failed to set dtim period for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set dtim period: %d for VDEV: %d\n",
- arvif->dtim_period, arvif->vdev_id);
}
if (changed & BSS_CHANGED_SSID &&
@@ -2188,16 +2353,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BSSID) {
if (!is_zero_ether_addr(info->bssid)) {
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d create peer %pM\n",
+ arvif->vdev_id, info->bssid);
+
ret = ath10k_peer_create(ar, arvif->vdev_id,
info->bssid);
if (ret)
ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
info->bssid, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Added peer: %pM for VDEV: %d\n",
- info->bssid, arvif->vdev_id);
-
if (vif->type == NL80211_IFTYPE_STATION) {
/*
@@ -2207,11 +2371,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
memcpy(arvif->u.sta.bssid, info->bssid,
ETH_ALEN);
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d start %pM\n",
+ arvif->vdev_id, info->bssid);
+
+ /* FIXME: check return value */
ret = ath10k_vdev_start(arvif);
- if (!ret)
- ath10k_dbg(ATH10K_DBG_MAC,
- "VDEV: %d started with BSSID: %pM\n",
- arvif->vdev_id, info->bssid);
}
/*
@@ -2235,16 +2400,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
cts_prot = 0;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_ENABLE_RTSCTS,
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+ arvif->vdev_id, cts_prot);
+
+ vdev_param = ar->wmi.vdev_param->enable_rtscts;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
cts_prot);
if (ret)
ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set CTS prot: %d for VDEV: %d\n",
- cts_prot, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2255,16 +2419,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_SLOT_TIME,
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+ arvif->vdev_id, slottime);
+
+ vdev_param = ar->wmi.vdev_param->slot_time;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
slottime);
if (ret)
ath10k_warn("Failed to set erp slot for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set slottime: %d for VDEV: %d\n",
- slottime, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2274,16 +2437,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
else
preamble = WMI_VDEV_PREAMBLE_LONG;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- WMI_VDEV_PARAM_PREAMBLE,
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d preamble %dn",
+ arvif->vdev_id, preamble);
+
+ vdev_param = ar->wmi.vdev_param->preamble;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
preamble);
if (ret)
ath10k_warn("Failed to set preamble for VDEV: %d\n",
arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set preamble: %d for VDEV: %d\n",
- preamble, arvif->vdev_id);
}
if (changed & BSS_CHANGED_ASSOC) {
@@ -2474,27 +2637,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* New station addition.
*/
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d peer create %pM (new sta)\n",
+ arvif->vdev_id, sta->addr);
+
ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
if (ret)
ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
sta->addr, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Added peer: %pM for VDEV: %d\n",
- sta->addr, arvif->vdev_id);
} else if ((old_state == IEEE80211_STA_NONE &&
new_state == IEEE80211_STA_NOTEXIST)) {
/*
* Existing station deletion.
*/
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "mac vdev %d peer delete %pM (sta gone)\n",
+ arvif->vdev_id, sta->addr);
ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
if (ret)
ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
sta->addr, arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Removed peer: %pM for VDEV: %d\n",
- sta->addr, arvif->vdev_id);
if (vif->type == NL80211_IFTYPE_STATION)
ath10k_bss_disassoc(hw, vif);
@@ -2505,14 +2667,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* New association.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n",
+ sta->addr);
+
ret = ath10k_station_assoc(ar, arvif, sta);
if (ret)
ath10k_warn("Failed to associate station: %pM\n",
sta->addr);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Station %pM moved to assoc state\n",
- sta->addr);
} else if (old_state == IEEE80211_STA_ASSOC &&
new_state == IEEE80211_STA_AUTH &&
(vif->type == NL80211_IFTYPE_AP ||
@@ -2520,14 +2681,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* Disassociation.
*/
+ ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+ sta->addr);
+
ret = ath10k_station_disassoc(ar, arvif, sta);
if (ret)
ath10k_warn("Failed to disassociate station: %pM\n",
sta->addr);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Station %pM moved to disassociated state\n",
- sta->addr);
}
mutex_unlock(&ar->conf_mutex);
@@ -2732,88 +2892,51 @@ static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
* Both RTS and Fragmentation threshold are interface-specific
* in ath10k, but device-specific in mac80211.
*/
-static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
-{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
-
- lockdep_assert_held(&arvif->ar->conf_mutex);
-
- /* During HW reconfiguration mac80211 reports all interfaces that were
- * running until reconfiguration was started. Since FW doesn't have any
- * vdevs at this point we must not iterate over this interface list.
- * This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
- if (ar_iter->ret)
- ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
- arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set RTS threshold: %d for VDEV: %d\n",
- rts, arvif->vdev_id);
-}
static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
- struct ath10k_generic_iter ar_iter;
struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ struct ath10k_vif *arvif;
+ int ret = 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_rts_iter, &ar_iter);
- mutex_unlock(&ar->conf_mutex);
-
- return ar_iter.ret;
-}
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
+ arvif->vdev_id, value);
-static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
-{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
-
- lockdep_assert_held(&arvif->ar->conf_mutex);
-
- /* During HW reconfiguration mac80211 reports all interfaces that were
- * running until reconfiguration was started. Since FW doesn't have any
- * vdevs at this point we must not iterate over this interface list.
- * This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set rts threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
+ mutex_unlock(&ar->conf_mutex);
- ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
- if (ar_iter->ret)
- ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
- arvif->vdev_id);
- else
- ath10k_dbg(ATH10K_DBG_MAC,
- "Set frag threshold: %d for VDEV: %d\n",
- frag, arvif->vdev_id);
+ return ret;
}
static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
{
- struct ath10k_generic_iter ar_iter;
struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ struct ath10k_vif *arvif;
+ int ret = 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_frag_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set fragmentation threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
mutex_unlock(&ar->conf_mutex);
- return ar_iter.ret;
+ return ret;
}
static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
@@ -2836,8 +2959,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
bool empty;
spin_lock_bh(&ar->htt.tx_lock);
- empty = bitmap_empty(ar->htt.used_msdu_ids,
- ar->htt.max_num_pending_tx);
+ empty = (ar->htt.num_pending_tx == 0);
spin_unlock_bh(&ar->htt.tx_lock);
skip = (ar->state == ATH10K_STATE_WEDGED);
@@ -3326,6 +3448,10 @@ int ath10k_mac_register(struct ath10k *ar)
IEEE80211_HW_WANT_MONITOR_VIF |
IEEE80211_HW_AP_LINK_PS;
+ /* MSDU can have HTT TX fragment pushed in front. The additional 4
+ * bytes is used for padding/alignment if necessary. */
+ ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4;
+
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;