Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 10 insertions, 15 deletions

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index d366dadcf86..0e643b016b3 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -80,7 +80,7 @@ static bool modparam_fastchanswitch;
 module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
 MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
 
-static int ath5k_modparam_no_hw_rfkill_switch;
+static bool ath5k_modparam_no_hw_rfkill_switch;
 module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch,
 								bool, S_IRUGO);
 MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state");
@@ -1867,7 +1867,8 @@ ath5k_beacon_send(struct ath5k_hw *ah)
 		ah->bmisscount = 0;
 	}
 
-	if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs > 1) ||
+	if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs +
+			ah->num_mesh_vifs > 1) ||
 			ah->opmode == NL80211_IFTYPE_MESH_POINT) {
 		u64 tsf = ath5k_hw_get_tsf64(ah);
 		u32 tsftu = TSF_TO_TU(tsf);
@@ -1952,7 +1953,8 @@ ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf)
 	u64 hw_tsf;
 
 	intval = ah->bintval & AR5K_BEACON_PERIOD;
-	if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs > 1) {
+	if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs
+		+ ah->num_mesh_vifs > 1) {
 		intval /= ATH_BCBUF;	/* staggered multi-bss beacons */
 		if (intval < 15)
 			ATH5K_WARN(ah, "intval %u is too low, min 15\n",
@@ -2330,15 +2332,6 @@ ath5k_calibrate_work(struct work_struct *work)
 					"got new rfgain, resetting\n");
 			ieee80211_queue_work(ah->hw, &ah->reset_work);
 		}
-
-		/* TODO: On full calibration we should stop TX here,
-		 * so that it doesn't interfere (mostly due to gain_f
-		 * calibration that messes with tx packets -see phy.c).
-		 *
-		 * NOTE: Stopping the queues from above is not enough
-		 * to stop TX but saves us from disconecting (at least
-		 * we don't lose packets). */
-		ieee80211_stop_queues(ah->hw);
 	} else
 		ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT;
 
@@ -2353,10 +2346,9 @@ ath5k_calibrate_work(struct work_struct *work)
 				ah->curchan->center_freq));
 
 	/* Clear calibration flags */
-	if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) {
-		ieee80211_wake_queues(ah->hw);
+	if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL)
 		ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
-	} else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)
+	else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)
 		ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT;
 }
 
@@ -2442,6 +2434,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
+	/* SW support for IBSS_RSN is provided by mac80211 */
+	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
 	/* both antennas can be configured as RX or TX */
 	hw->wiphy->available_antennas_tx = 0x3;
 	hw->wiphy->available_antennas_rx = 0x3;