summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath9k/init.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-02 20:53:45 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-02 20:53:45 -0700
commitcd6362befe4cc7bf589a5236d2a780af2d47bcc9 (patch)
tree3bd4e13ec3f92a00dc4f6c3d65e820b54dbfe46e /drivers/net/wireless/ath/ath9k/init.c
parent0f1b1e6d73cb989ce2c071edc57deade3b084dfe (diff)
parentb1586f099ba897542ece36e8a23c1a62907261ef (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/init.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/init.c247
1 files changed, 9 insertions, 238 deletions
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 1fc2e5a26b5..c0a4e866edc 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -62,111 +62,6 @@ module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
bool is_ath9k_unloaded;
-/* We use the hw_value as an index into our private channel structure */
-
-#define CHAN2G(_freq, _idx) { \
- .band = IEEE80211_BAND_2GHZ, \
- .center_freq = (_freq), \
- .hw_value = (_idx), \
- .max_power = 20, \
-}
-
-#define CHAN5G(_freq, _idx) { \
- .band = IEEE80211_BAND_5GHZ, \
- .center_freq = (_freq), \
- .hw_value = (_idx), \
- .max_power = 20, \
-}
-
-/* Some 2 GHz radios are actually tunable on 2312-2732
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static const struct ieee80211_channel ath9k_2ghz_chantable[] = {
- CHAN2G(2412, 0), /* Channel 1 */
- CHAN2G(2417, 1), /* Channel 2 */
- CHAN2G(2422, 2), /* Channel 3 */
- CHAN2G(2427, 3), /* Channel 4 */
- CHAN2G(2432, 4), /* Channel 5 */
- CHAN2G(2437, 5), /* Channel 6 */
- CHAN2G(2442, 6), /* Channel 7 */
- CHAN2G(2447, 7), /* Channel 8 */
- CHAN2G(2452, 8), /* Channel 9 */
- CHAN2G(2457, 9), /* Channel 10 */
- CHAN2G(2462, 10), /* Channel 11 */
- CHAN2G(2467, 11), /* Channel 12 */
- CHAN2G(2472, 12), /* Channel 13 */
- CHAN2G(2484, 13), /* Channel 14 */
-};
-
-/* Some 5 GHz radios are actually tunable on XXXX-YYYY
- * on 5 MHz steps, we support the channels which we know
- * we have calibration data for all cards though to make
- * this static */
-static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
- /* _We_ call this UNII 1 */
- CHAN5G(5180, 14), /* Channel 36 */
- CHAN5G(5200, 15), /* Channel 40 */
- CHAN5G(5220, 16), /* Channel 44 */
- CHAN5G(5240, 17), /* Channel 48 */
- /* _We_ call this UNII 2 */
- CHAN5G(5260, 18), /* Channel 52 */
- CHAN5G(5280, 19), /* Channel 56 */
- CHAN5G(5300, 20), /* Channel 60 */
- CHAN5G(5320, 21), /* Channel 64 */
- /* _We_ call this "Middle band" */
- CHAN5G(5500, 22), /* Channel 100 */
- CHAN5G(5520, 23), /* Channel 104 */
- CHAN5G(5540, 24), /* Channel 108 */
- CHAN5G(5560, 25), /* Channel 112 */
- CHAN5G(5580, 26), /* Channel 116 */
- CHAN5G(5600, 27), /* Channel 120 */
- CHAN5G(5620, 28), /* Channel 124 */
- CHAN5G(5640, 29), /* Channel 128 */
- CHAN5G(5660, 30), /* Channel 132 */
- CHAN5G(5680, 31), /* Channel 136 */
- CHAN5G(5700, 32), /* Channel 140 */
- /* _We_ call this UNII 3 */
- CHAN5G(5745, 33), /* Channel 149 */
- CHAN5G(5765, 34), /* Channel 153 */
- CHAN5G(5785, 35), /* Channel 157 */
- CHAN5G(5805, 36), /* Channel 161 */
- CHAN5G(5825, 37), /* Channel 165 */
-};
-
-/* Atheros hardware rate code addition for short premble */
-#define SHPCHECK(__hw_rate, __flags) \
- ((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
-
-#define RATE(_bitrate, _hw_rate, _flags) { \
- .bitrate = (_bitrate), \
- .flags = (_flags), \
- .hw_value = (_hw_rate), \
- .hw_value_short = (SHPCHECK(_hw_rate, _flags)) \
-}
-
-static struct ieee80211_rate ath9k_legacy_rates[] = {
- RATE(10, 0x1b, 0),
- RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
- RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ |
- IEEE80211_RATE_SUPPORTS_10MHZ)),
-};
#ifdef CONFIG_MAC80211_LEDS
static const struct ieee80211_tpt_blink ath9k_tpt_blink[] = {
@@ -258,64 +153,6 @@ static unsigned int ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 cl
/* Initialization */
/**************************/
-static void setup_ht_cap(struct ath_softc *sc,
- struct ieee80211_sta_ht_cap *ht_info)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- u8 tx_streams, rx_streams;
- int i, max_streams;
-
- ht_info->ht_supported = true;
- ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
- IEEE80211_HT_CAP_SM_PS |
- IEEE80211_HT_CAP_SGI_40 |
- IEEE80211_HT_CAP_DSSSCCK40;
-
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_LDPC)
- ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
-
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20)
- ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
-
- ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
- ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-
- if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah))
- max_streams = 1;
- else if (AR_SREV_9462(ah))
- max_streams = 2;
- else if (AR_SREV_9300_20_OR_LATER(ah))
- max_streams = 3;
- else
- max_streams = 2;
-
- if (AR_SREV_9280_20_OR_LATER(ah)) {
- if (max_streams >= 2)
- ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
- ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
- }
-
- /* set up supported mcs set */
- memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
- tx_streams = ath9k_cmn_count_streams(ah->txchainmask, max_streams);
- rx_streams = ath9k_cmn_count_streams(ah->rxchainmask, max_streams);
-
- ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n",
- tx_streams, rx_streams);
-
- if (tx_streams != rx_streams) {
- ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
- ht_info->mcs.tx_params |= ((tx_streams - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
- }
-
- for (i = 0; i < rx_streams; i++)
- ht_info->mcs.rx_mask[i] = 0xff;
-
- ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-}
-
static void ath9k_reg_notifier(struct wiphy *wiphy,
struct regulatory_request *request)
{
@@ -486,51 +323,6 @@ static int ath9k_init_queues(struct ath_softc *sc)
return 0;
}
-static int ath9k_init_channels_rates(struct ath_softc *sc)
-{
- void *channels;
-
- BUILD_BUG_ON(ARRAY_SIZE(ath9k_2ghz_chantable) +
- ARRAY_SIZE(ath9k_5ghz_chantable) !=
- ATH9K_NUM_CHANNELS);
-
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) {
- channels = devm_kzalloc(sc->dev,
- sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- memcpy(channels, ath9k_2ghz_chantable,
- sizeof(ath9k_2ghz_chantable));
- sc->sbands[IEEE80211_BAND_2GHZ].channels = channels;
- sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
- sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
- ARRAY_SIZE(ath9k_2ghz_chantable);
- sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
- sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
- ARRAY_SIZE(ath9k_legacy_rates);
- }
-
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) {
- channels = devm_kzalloc(sc->dev,
- sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- memcpy(channels, ath9k_5ghz_chantable,
- sizeof(ath9k_5ghz_chantable));
- sc->sbands[IEEE80211_BAND_5GHZ].channels = channels;
- sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
- sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
- ARRAY_SIZE(ath9k_5ghz_chantable);
- sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
- ath9k_legacy_rates + 4;
- sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
- ARRAY_SIZE(ath9k_legacy_rates) - 4;
- }
- return 0;
-}
-
static void ath9k_init_misc(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -538,7 +330,7 @@ static void ath9k_init_misc(struct ath_softc *sc)
setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
- sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
+ common->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->config.txpowlimit = ATH_TXPOWER_MAX;
memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
sc->beacon.slottime = ATH9K_SLOT_TIME_9;
@@ -793,7 +585,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
goto err_btcoex;
- ret = ath9k_init_channels_rates(sc);
+ ret = ath9k_cmn_init_channels_rates(common);
if (ret)
goto err_btcoex;
@@ -823,10 +615,11 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct cfg80211_chan_def chandef;
int i;
- sband = &sc->sbands[band];
+ sband = &common->sbands[band];
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
ah->curchan = &ah->channels[chan->hw_value];
@@ -849,17 +642,6 @@ static void ath9k_init_txpower_limits(struct ath_softc *sc)
ah->curchan = curchan;
}
-void ath9k_reload_chainmask_settings(struct ath_softc *sc)
-{
- if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT))
- return;
-
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
- setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
-}
-
static const struct ieee80211_iface_limit if_limits[] = {
{ .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
@@ -949,6 +731,7 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+ hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
hw->queues = 4;
hw->max_rates = 4;
@@ -969,13 +752,13 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &sc->sbands[IEEE80211_BAND_2GHZ];
+ &common->sbands[IEEE80211_BAND_2GHZ];
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &sc->sbands[IEEE80211_BAND_5GHZ];
+ &common->sbands[IEEE80211_BAND_5GHZ];
ath9k_init_wow(hw);
- ath9k_reload_chainmask_settings(sc);
+ ath9k_cmn_reload_chainmask(ah);
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
@@ -1106,19 +889,11 @@ static int __init ath9k_init(void)
{
int error;
- /* Register rate control algorithm */
- error = ath_rate_control_register();
- if (error != 0) {
- pr_err("Unable to register rate control algorithm: %d\n",
- error);
- goto err_out;
- }
-
error = ath_pci_init();
if (error < 0) {
pr_err("No PCI devices found, driver not installed\n");
error = -ENODEV;
- goto err_rate_unregister;
+ goto err_out;
}
error = ath_ahb_init();
@@ -1131,9 +906,6 @@ static int __init ath9k_init(void)
err_pci_exit:
ath_pci_exit();
-
- err_rate_unregister:
- ath_rate_control_unregister();
err_out:
return error;
}
@@ -1144,7 +916,6 @@ static void __exit ath9k_exit(void)
is_ath9k_unloaded = true;
ath_ahb_exit();
ath_pci_exit();
- ath_rate_control_unregister();
pr_info("%s: Driver unloaded\n", dev_info);
}
module_exit(ath9k_exit);