Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 16 insertions, 80 deletions

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 4a00806e285..215eb2536b1 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -118,13 +118,15 @@ void ath9k_ps_restore(struct ath_softc *sc)
 	if (--sc->ps_usecount != 0)
 		goto unlock;
 
-	if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
+	if (sc->ps_flags & PS_WAIT_FOR_TX_ACK)
+		goto unlock;
+
+	if (sc->ps_idle)
 		mode = ATH9K_PM_FULL_SLEEP;
 	else if (sc->ps_enabled &&
 		 !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 			      PS_WAIT_FOR_CAB |
-			      PS_WAIT_FOR_PSPOLL_DATA |
-			      PS_WAIT_FOR_TX_ACK)))
+			      PS_WAIT_FOR_PSPOLL_DATA)))
 		mode = ATH9K_PM_NETWORK_SLEEP;
 	else
 		goto unlock;
@@ -332,17 +334,11 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan,
 		hchan = ah->curchan;
 	}
 
-	if (fastcc && (ah->chip_fullsleep ||
-	    !ath9k_hw_check_alive(ah)))
-		fastcc = false;
-
 	if (!ath_prepare_reset(sc, retry_tx, flush))
 		fastcc = false;
 
 	ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n",
-		hchan->channel, !!(hchan->channelFlags & (CHANNEL_HT40MINUS |
-							  CHANNEL_HT40PLUS)),
-		fastcc);
+		hchan->channel, IS_CHAN_HT40(hchan), fastcc);
 
 	r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (r) {
@@ -373,12 +369,8 @@ static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	if (sc->sc_flags & SC_OP_INVALID)
 		return -EIO;
 
-	ath9k_ps_wakeup(sc);
-
 	r = ath_reset_internal(sc, hchan, false);
 
-	ath9k_ps_restore(sc);
-
 	return r;
 }
 
@@ -647,7 +639,8 @@ static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
 #endif
 	an->sta = sta;
 	an->vif = vif;
-	if (sc->sc_flags & SC_OP_TXAGGR) {
+
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		ath_tx_node_init(sc, an);
 		an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 				     sta->ht_cap.ampdu_factor);
@@ -666,7 +659,7 @@ static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 	an->sta = NULL;
 #endif
 
-	if (sc->sc_flags & SC_OP_TXAGGR)
+	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		ath_tx_node_cleanup(sc, an);
 }
 
@@ -741,12 +734,7 @@ void ath9k_tasklet(unsigned long data)
 			ath_tx_tasklet(sc);
 	}
 
-	if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
-		if (status & ATH9K_INT_GENTIMER)
-			ath_gen_timer_isr(sc->sc_ah);
-
-	if ((status & ATH9K_INT_MCI) && ATH9K_HW_CAP_MCI)
-		ath_mci_intr(sc);
+	ath9k_btcoex_handle_interrupt(sc, status);
 
 out:
 	/* re-enable hardware interrupt */
@@ -1004,12 +992,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
 		curchan->center_freq);
 
 	ath9k_ps_wakeup(sc);
-
 	mutex_lock(&sc->mutex);
 
-	/* setup initial channel */
-	sc->chan_idx = curchan->hw_value;
-
 	init_channel = ath9k_cmn_get_curchannel(hw, ah);
 
 	/* Reset SERDES registers */
@@ -1058,9 +1042,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	sc->sc_flags &= ~SC_OP_INVALID;
 	sc->sc_ah->is_monitoring = false;
 
-	/* Disable BMISS interrupt when we're not associated */
-	ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
-
 	if (!ath_complete_reset(sc, false)) {
 		r = -EIO;
 		spin_unlock_bh(&sc->sc_pcu_lock);
@@ -1081,16 +1062,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 
 	spin_unlock_bh(&sc->sc_pcu_lock);
 
-	if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
-	    !ah->btcoex_hw.enabled) {
-		if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI))
-			ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
-						   AR_STOMP_LOW_WLAN_WGHT);
-		ath9k_hw_btcoex_enable(ah);
-
-		if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
-			ath9k_btcoex_timer_resume(sc);
-	}
+	ath9k_start_btcoex(sc);
 
 	if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
 		common->bus_ops->extn_synch_en(common);
@@ -1191,13 +1163,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	/* Ensure HW is awake when we try to shut it down. */
 	ath9k_ps_wakeup(sc);
 
-	if (ah->btcoex_hw.enabled &&
-	    ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
-		ath9k_hw_btcoex_disable(ah);
-		if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
-			ath9k_btcoex_timer_pause(sc);
-		ath_mci_flush_profile(&sc->btcoex.mci);
-	}
+	ath9k_stop_btcoex(sc);
 
 	spin_lock_bh(&sc->sc_pcu_lock);
 
@@ -1303,7 +1269,6 @@ static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 		iter_data->nwds++;
 		break;
 	default:
-		iter_data->nothers++;
 		break;
 	}
 }
@@ -1589,12 +1554,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 	ath9k_ps_wakeup(sc);
 	mutex_lock(&sc->mutex);
 
-	/*
-	 * Leave this as the first check because we need to turn on the
-	 * radio if it was disabled before prior to processing the rest
-	 * of the changes. Likewise we must only disable the radio towards
-	 * the end.
-	 */
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
 		sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
 		if (sc->ps_idle)
@@ -1793,7 +1752,7 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw,
 	struct ath_softc *sc = hw->priv;
 	struct ath_node *an = (struct ath_node *) sta->drv_priv;
 
-	if (!(sc->sc_flags & SC_OP_TXAGGR))
+	if (!sta->ht_cap.ht_supported)
 		return;
 
 	switch (cmd) {
@@ -2005,7 +1964,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	ath9k_ps_wakeup(sc);
 	mutex_lock(&sc->mutex);
 
-	if (changed & BSS_CHANGED_BSSID) {
+	if (changed & BSS_CHANGED_ASSOC) {
 		ath9k_config_bss(sc, vif);
 
 		ath_dbg(common, CONFIG, "BSSID: %pM aid: 0x%x\n",
@@ -2085,25 +2044,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 			ath_beacon_config(sc, vif);
 	}
 
-	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
-		ath_dbg(common, CONFIG, "BSS Changed PREAMBLE %d\n",
-			bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
-		else
-			sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
-	}
-
-	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
-		ath_dbg(common, CONFIG, "BSS Changed CTS PROT %d\n",
-			bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot &&
-		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
-			sc->sc_flags |= SC_OP_PROTECT_ENABLE;
-		else
-			sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
-	}
-
 	mutex_unlock(&sc->mutex);
 	ath9k_ps_restore(sc);
 }
@@ -2161,15 +2101,10 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 
 	switch (action) {
 	case IEEE80211_AMPDU_RX_START:
-		if (!(sc->sc_flags & SC_OP_RXAGGR))
-			ret = -ENOTSUPP;
 		break;
 	case IEEE80211_AMPDU_RX_STOP:
 		break;
 	case IEEE80211_AMPDU_TX_START:
-		if (!(sc->sc_flags & SC_OP_TXAGGR))
-			return -EOPNOTSUPP;
-
 		ath9k_ps_wakeup(sc);
 		ret = ath_tx_aggr_start(sc, sta, tid, ssn);
 		if (!ret)
@@ -2332,6 +2267,7 @@ static int ath9k_tx_last_beacon(struct ieee80211_hw *hw)
 	struct ath_vif *avp;
 	struct ath_buf *bf;
 	struct ath_tx_status ts;
+	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
 	int status;
 
 	vif = sc->beacon.bslot[0];
@@ -2342,7 +2278,7 @@ static int ath9k_tx_last_beacon(struct ieee80211_hw *hw)
 	if (!avp->is_bslot_active)
 		return 0;
 
-	if (!sc->beacon.tx_processed) {
+	if (!sc->beacon.tx_processed && !edma) {
 		tasklet_disable(&sc->bcon_tasklet);
 
 		bf = avp->av_bcbuf;