mac80211: clean up beacon interval settings

We currently have two beacon interval configuration knobs:
hw.conf.beacon_int and vif.bss_info.beacon_int. This is
rather confusing, even though the former is used when we
beacon ourselves and the latter when we are associated to
an AP.

This just deprecates the hw.conf.beacon_int setting in favour
of always using vif.bss_info.beacon_int. Since it touches all
the beaconing IBSS code anyway, we can also add support for
the cfg80211 IBSS beacon interval configuration easily.

NOTE: The hw.conf.beacon_int setting is retained for now due
      to drivers still using it -- I couldn't untangle all
      drivers, some are updated in this patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 files changed, 29 insertions, 22 deletions

diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index c8fa3073169..0e5967dd119 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -316,9 +316,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 	u32 v = 0;
 	u32 pretbtt = 0;
 
-	v |= ar->hw->conf.beacon_int;
-
 	if (ar->vif) {
+		v |= ar->vif->bss_conf.beacon_int;
+
 		switch (ar->vif->type) {
 		case NL80211_IFTYPE_MESH_POINT:
 		case NL80211_IFTYPE_ADHOC:
@@ -326,7 +326,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
 			break;
 		case NL80211_IFTYPE_AP:
 			v |= BIT(24);
-			pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+			pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
 			break;
 		default:
 			break;
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 1b60906b80c..49c729bc714 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1337,7 +1337,7 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
 			goto out;
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+	if (changed & BSS_CHANGED_BEACON_INT) {
 		err = ar9170_set_beacon_timers(ar);
 		if (err)
 			goto out;
@@ -1499,6 +1499,9 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
 #endif /* CONFIG_AR9170_LEDS */
 	}
 
+	if (changed & BSS_CHANGED_BEACON_INT)
+		err = ar9170_set_beacon_timers(ar);
+
 	if (changed & BSS_CHANGED_HT) {
 		/* TODO */
 		err = 0;
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index c8c658bfcf9..e4b1d9efa42 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2756,7 +2756,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&sc->lock);
 
-	sc->bintval = conf->beacon_int;
 	sc->power_level = conf->power_level;
 
 	ret = ath5k_chan_set(sc, conf->channel);
@@ -3083,6 +3082,10 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 				    u32 changes)
 {
 	struct ath5k_softc *sc = hw->priv;
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		sc->bintval = bss_conf->beacon_int;
+
 	if (changes & BSS_CHANGED_ASSOC) {
 		mutex_lock(&sc->lock);
 		sc->assoc = bss_conf->assoc;
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index c92d46fa9d5..d5084ddf44f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -590,6 +590,8 @@ struct ath_softc {
 	int led_on_cnt;
 	int led_off_cnt;
 
+	int beacon_interval;
+
 	struct ath_rfkill rf_kill;
 	struct ath_ani ani;
 	struct ath9k_node_stats nodestats;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index eb4759fc6a0..c17b8382e32 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -320,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		u64 tsfadjust;
 		int intval;
 
-		intval = sc->hw->conf.beacon_int ?
-			sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+		intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 		/*
 		 * Calculate the TSF offset for this beacon slot, i.e., the
@@ -431,8 +430,7 @@ void ath_beacon_tasklet(unsigned long data)
 	 * on the tsf to safeguard against missing an swba.
 	 */
 
-	intval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+	intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 
 	tsf = ath9k_hw_gettsf64(ah);
 	tsftu = TSF_TO_TU(tsf>>32, tsf);
@@ -711,8 +709,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 	/* Setup the beacon configuration parameters */
 
 	memset(&conf, 0, sizeof(struct ath_beacon_config));
-	conf.beacon_interval = sc->hw->conf.beacon_int ?
-		sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+	conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
 	conf.listen_interval = 1;
 	conf.dtim_period = conf.beacon_interval;
 	conf.dtim_count = 1;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2398d4f45f2..28cc9cd52f3 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2358,16 +2358,6 @@ skip_chan_change:
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->config.txpowlimit = 2 * conf->power_level;
 
-	/*
-	 * The HW TSF has to be reset when the beacon interval changes.
-	 * We set the flag here, and ath_beacon_config_ap() would take this
-	 * into account when it gets called through the subsequent
-	 * config_interface() call - with IFCC_BEACON in the changed field.
-	 */
-
-	if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
-		sc->sc_flags |= SC_OP_TSF_RESET;
-
 	mutex_unlock(&sc->mutex);
 
 	return 0;
@@ -2635,6 +2625,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
 
+	/*
+	 * The HW TSF has to be reset when the beacon interval changes.
+	 * We set the flag here, and ath_beacon_config_ap() would take this
+	 * into account when it gets called through the subsequent
+	 * config_interface() call - with IFCC_BEACON in the changed field.
+	 */
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		sc->sc_flags |= SC_OP_TSF_RESET;
+		sc->beacon_interval = bss_conf->beacon_int;
+	}
+
 	mutex_unlock(&sc->mutex);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index faf2cab49ea..501493ffc3a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -971,7 +971,7 @@ int ath_cabq_update(struct ath_softc *sc)
 	else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
 		sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
 
-	qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+	qi.tqi_readyTime = (sc->beacon_interval *
 			    sc->config.cabqReadytime) / 100;
 	ath_txq_update(sc, qnum, &qi);