summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/b43
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2008-05-20 12:10:49 +0200
committerJohn W. Linville <linville@tuxdriver.com>2008-06-03 15:00:13 -0400
commit04dea136b06ddd58879c9272b9f66ff060962317 (patch)
tree4f4b17fb14f3ae56eb97554c8609a7ff159ac062 /drivers/net/wireless/b43
parent9e72ebd686a7f39facdfff639386055f1ad7dc88 (diff)
b43: enable mesh
This patch enables b43 to do mesh networking, tested against my zd1211rw dongle. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/b43')
-rw-r--r--drivers/net/wireless/b43/main.c33
1 files changed, 22 insertions, 11 deletions
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index cbb317bb348..f9c14c66434 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1430,11 +1430,17 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
i += ie_len + 2;
}
if (!tim_found) {
- b43warn(dev->wl, "Did not find a valid TIM IE in "
- "the beacon template packet. AP or IBSS operation "
- "may be broken.\n");
- } else
- b43dbg(dev->wl, "Updated beacon template\n");
+ /*
+ * If ucode wants to modify TIM do it behind the beacon, this
+ * will happen, for example, when doing mesh networking.
+ */
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_TIMBPOS,
+ len + sizeof(struct b43_plcp_hdr6));
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_DTIMPER, 0);
+ }
+ b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
}
static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
@@ -1549,7 +1555,8 @@ static void handle_irq_beacon(struct b43_wldev *dev)
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
- if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) &&
+ !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
return;
/* This is the bottom half of the asynchronous beacon update. */
@@ -2491,7 +2498,8 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
ctl &= ~B43_MACCTL_BEACPROMISC;
ctl |= B43_MACCTL_INFRA;
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
ctl |= B43_MACCTL_AP;
else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
ctl &= ~B43_MACCTL_INFRA;
@@ -3358,8 +3366,9 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
b43_set_rx_antenna(dev, antenna);
- /* Update templates for AP mode. */
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ /* Update templates for AP/mesh mode. */
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
@@ -3547,8 +3556,9 @@ static int b43_op_config_interface(struct ieee80211_hw *hw,
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
- B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
+ if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) ||
+ b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) {
+ B43_WARN_ON(conf->type != wl->if_type);
b43_set_ssid(dev, conf->ssid, conf->ssid_len);
if (conf->beacon)
b43_update_templates(wl, conf->beacon);
@@ -4088,6 +4098,7 @@ static int b43_op_add_interface(struct ieee80211_hw *hw,
/* TODO: allow WDS/AP devices to coexist */
if (conf->type != IEEE80211_IF_TYPE_AP &&
+ conf->type != IEEE80211_IF_TYPE_MESH_POINT &&
conf->type != IEEE80211_IF_TYPE_STA &&
conf->type != IEEE80211_IF_TYPE_WDS &&
conf->type != IEEE80211_IF_TYPE_IBSS)