Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 3 insertions, 107 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index f822ac447c3..9ed73e5154b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -5,7 +5,7 @@
  *
  * GPL LICENSE SUMMARY
  *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -30,7 +30,7 @@
  *
  * BSD LICENSE
  *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -69,22 +69,9 @@
 #ifndef __iwl_commands_h__
 #define __iwl_commands_h__
 
-#include <linux/etherdevice.h>
 #include <linux/ieee80211.h>
+#include <linux/types.h>
 
-struct iwl_priv;
-
-/* uCode version contains 4 values: Major/Minor/API/Serial */
-#define IWL_UCODE_MAJOR(ver)	(((ver) & 0xFF000000) >> 24)
-#define IWL_UCODE_MINOR(ver)	(((ver) & 0x00FF0000) >> 16)
-#define IWL_UCODE_API(ver)	(((ver) & 0x0000FF00) >> 8)
-#define IWL_UCODE_SERIAL(ver)	((ver) & 0x000000FF)
-
-
-/* Tx rates */
-#define IWL_CCK_RATES	4
-#define IWL_OFDM_RATES	8
-#define IWL_MAX_RATES	(IWL_CCK_RATES + IWL_OFDM_RATES)
 
 enum {
 	REPLY_ALIVE = 0x1,
@@ -213,48 +200,6 @@ enum {
 /* iwl_cmd_header flags value */
 #define IWL_CMD_FAILED_MSK 0x40
 
-#define SEQ_TO_QUEUE(s)	(((s) >> 8) & 0x1f)
-#define QUEUE_TO_SEQ(q)	(((q) & 0x1f) << 8)
-#define SEQ_TO_INDEX(s)	((s) & 0xff)
-#define INDEX_TO_SEQ(i)	((i) & 0xff)
-#define SEQ_RX_FRAME	cpu_to_le16(0x8000)
-
-/**
- * struct iwl_cmd_header
- *
- * This header format appears in the beginning of each command sent from the
- * driver, and each response/notification received from uCode.
- */
-struct iwl_cmd_header {
-	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
-	u8 flags;	/* 0:5 reserved, 6 abort, 7 internal */
-	/*
-	 * The driver sets up the sequence number to values of its choosing.
-	 * uCode does not use this value, but passes it back to the driver
-	 * when sending the response to each driver-originated command, so
-	 * the driver can match the response to the command.  Since the values
-	 * don't get used by uCode, the driver may set up an arbitrary format.
-	 *
-	 * There is one exception:  uCode sets bit 15 when it originates
-	 * the response/notification, i.e. when the response/notification
-	 * is not a direct response to a command sent by the driver.  For
-	 * example, uCode issues REPLY_RX when it sends a received frame
-	 * to the driver; it is not a direct response to any driver command.
-	 *
-	 * The Linux driver uses the following format:
-	 *
-	 *  0:7		tfd index - position within TX queue
-	 *  8:12	TX queue id
-	 *  13:14	reserved
-	 *  15		unsolicited RX or uCode-originated notification
-	 */
-	__le16 sequence;
-
-	/* command or response/notification data follows immediately */
-	u8 data[0];
-} __packed;
-
-
 /**
  * iwlagn rate_n_flags bit fields
  *
@@ -3151,8 +3096,6 @@ struct iwl_enhance_sensitivity_cmd {
  */
 
 /* Phy calibration command for series */
-/* The default calibrate table size if not specified by firmware */
-#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE	18
 enum {
 	IWL_PHY_CALIBRATE_DC_CMD		= 8,
 	IWL_PHY_CALIBRATE_LO_CMD		= 9,
@@ -3161,11 +3104,8 @@ enum {
 	IWL_PHY_CALIBRATE_BASE_BAND_CMD		= 16,
 	IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD	= 17,
 	IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD	= 18,
-	IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE	= 19,
 };
 
-#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE		(253)
-
 /* This enum defines the bitmap of various calibrations to enable in both
  * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
  */
@@ -3905,50 +3845,6 @@ struct iwlagn_wowlan_kek_kck_material_cmd {
 	__le64	replay_ctr;
 } __packed;
 
-/******************************************************************************
- * (13)
- * Union of all expected notifications/responses:
- *
- *****************************************************************************/
-#define FH_RSCSR_FRAME_SIZE_MSK	(0x00003FFF)	/* bits 0-13 */
-
-struct iwl_rx_packet {
-	/*
-	 * The first 4 bytes of the RX frame header contain both the RX frame
-	 * size and some flags.
-	 * Bit fields:
-	 * 31:    flag flush RB request
-	 * 30:    flag ignore TC (terminal counter) request
-	 * 29:    flag fast IRQ request
-	 * 28-14: Reserved
-	 * 13-00: RX frame size
-	 */
-	__le32 len_n_flags;
-	struct iwl_cmd_header hdr;
-	union {
-		struct iwl_alive_resp alive_frame;
-		struct iwl_spectrum_notification spectrum_notif;
-		struct iwl_csa_notification csa_notif;
-		struct iwl_error_resp err_resp;
-		struct iwl_card_state_notif card_state_notif;
-		struct iwl_add_sta_resp add_sta;
-		struct iwl_rem_sta_resp rem_sta;
-		struct iwl_sleep_notification sleep_notif;
-		struct iwl_spectrum_resp spectrum;
-		struct iwl_notif_statistics stats;
-		struct iwl_bt_notif_statistics stats_bt;
-		struct iwl_compressed_ba_resp compressed_ba;
-		struct iwl_missed_beacon_notif missed_beacon;
-		struct iwl_coex_medium_notification coex_medium_notif;
-		struct iwl_coex_event_resp coex_event;
-		struct iwl_bt_coex_profile_notif bt_coex_profile_notif;
-		__le32 status;
-		u8 raw[0];
-	} u;
-} __packed;
-
-int iwl_agn_check_rxon_cmd(struct iwl_priv *priv);
-
 /*
  * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification)
  */