mac80211: change MIMO_PS to SM_PS

This patch follows 11n spec naming more rigorously replacing MIMO_PS
with SM_PS (Spatial Multiplexing Power Save).

(Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS",
"iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS",
and "iwlwifi: remove double definition of SM PS". -- JWL)

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

5 files changed, 15 insertions, 20 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 98f2c843b99..4fc3a0f1d8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -1153,8 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	    !sta->ht_info.ht_supported)
 		return -1;
 
-	if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
-						== IWL_MIMO_PS_STATIC)
+	if (((sta->ht_info.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+						== WLAN_HT_CAP_SM_PS_STATIC)
 		return -1;
 
 	/* Need both Tx chains/antennas to support MIMO */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1547122e66f..27ddf6cb1c6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -564,7 +564,7 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
 	if (!iwl_conf->is_ht)
 		return;
 
-	priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
+	priv->ps_mode = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
 
 	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
 		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a0b86af25c8..789556db684 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -399,8 +399,8 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 
 	ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
-	ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
-			     (IWL_MIMO_PS_NONE << 2));
+	ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS &
+			     (WLAN_HT_CAP_SM_PS_DISABLED << 2));
 
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
 	if (priv->hw_params.fat_channel & BIT(band)) {
@@ -709,7 +709,7 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 
 	/* # of Rx chains to use when expecting MIMO. */
-	if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
+	if (is_single || (!is_cam && (priv->ps_mode == WLAN_HT_CAP_SM_PS_STATIC)))
 		return 2;
 	else
 		return 3;
@@ -721,14 +721,14 @@ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 	/* # Rx chains when idling and maybe trying to save power */
 	switch (priv->ps_mode) {
-	case IWL_MIMO_PS_STATIC:
-	case IWL_MIMO_PS_DYNAMIC:
+	case WLAN_HT_CAP_SM_PS_STATIC:
+	case WLAN_HT_CAP_SM_PS_DYNAMIC:
 		idle_cnt = (is_cam) ? 2 : 1;
 		break;
-	case IWL_MIMO_PS_NONE:
+	case WLAN_HT_CAP_SM_PS_DISABLED:
 		idle_cnt = (is_cam) ? active_cnt : 1;
 		break;
-	case IWL_MIMO_PS_INVALID:
+	case WLAN_HT_CAP_SM_PS_INVALID:
 	default:
 		IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
 		WARN_ON(1);
@@ -912,7 +912,7 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->iw_mode = IEEE80211_IF_TYPE_STA;
 
 	priv->use_ant_b_for_management_frame = 1; /* start with ant B */
-	priv->ps_mode = IWL_MIMO_PS_NONE;
+	priv->ps_mode = WLAN_HT_CAP_SM_PS_DISABLED;
 
 	/* Choose which receivers/antennas to use */
 	iwl_set_rxon_chain(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 640ceea913c..f302e93b779 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -644,11 +644,6 @@ struct iwl_kw {
 #define IWL_CHANNEL_WIDTH_20MHZ   0
 #define IWL_CHANNEL_WIDTH_40MHZ   1
 
-#define IWL_MIMO_PS_STATIC        0
-#define IWL_MIMO_PS_NONE          3
-#define IWL_MIMO_PS_DYNAMIC       1
-#define IWL_MIMO_PS_INVALID       2
-
 #define IWL_OPERATION_MODE_AUTO     0
 #define IWL_OPERATION_MODE_HT_ONLY  1
 #define IWL_OPERATION_MODE_MIXED    2
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 5b7b05c8773..a72569f1acb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -191,20 +191,20 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 	if (!sta_ht_inf || !sta_ht_inf->ht_supported)
 		goto done;
 
-	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2;
+	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
 
 	sta_flags = priv->stations[index].sta.station_flags;
 
 	sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
 
 	switch (mimo_ps_mode) {
-	case WLAN_HT_CAP_MIMO_PS_STATIC:
+	case WLAN_HT_CAP_SM_PS_STATIC:
 		sta_flags |= STA_FLG_MIMO_DIS_MSK;
 		break;
-	case WLAN_HT_CAP_MIMO_PS_DYNAMIC:
+	case WLAN_HT_CAP_SM_PS_DYNAMIC:
 		sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
 		break;
-	case WLAN_HT_CAP_MIMO_PS_DISABLED:
+	case WLAN_HT_CAP_SM_PS_DISABLED:
 		break;
 	default:
 		IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);