summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/orinoco_tmd.c
diff options
context:
space:
mode:
authorPavel Roskin <proski@gnu.org>2006-04-07 04:10:57 -0400
committerJohn W. Linville <linville@tuxdriver.com>2006-04-24 16:15:52 -0400
commitb884c872fa1917614b42a39020ffcca7fa9302b1 (patch)
tree82f5ba67f6b38c96804fb449e018d83fbdce65a1 /drivers/net/wireless/orinoco_tmd.c
parentc6fb2e9abef894efc4870e4c1e3aa4365b830a11 (diff)
[PATCH] orinoco: reduce differences between PCI drivers, create orinoco_pci.h
Make all Orinoco PCI drivers (orinoco_pci, orinoco_plx, orinoco_tmd and orinoco_nortel) as similar as possible. Use the best implementation of error handling, the best error messages, the best comments. Put common code to orinoco_pci.h. For now, it's suspend and resume functions and function for registering the network device. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/orinoco_tmd.c')
-rw-r--r--drivers/net/wireless/orinoco_tmd.c165
1 files changed, 43 insertions, 122 deletions
diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
index b74807d4141..438fe545b18 100644
--- a/drivers/net/wireless/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco_tmd.c
@@ -1,5 +1,5 @@
/* orinoco_tmd.c
- *
+ *
* Driver for Prism II devices which would usually be driven by orinoco_cs,
* but are connected to the PCI bus by a TMD7160.
*
@@ -29,14 +29,14 @@
* Caution: this is experimental and probably buggy. For success and
* failure reports for different cards and adaptors, see
- * orinoco_tmd_pci_id_table near the end of the file. If you have a
+ * orinoco_tmd_id_table near the end of the file. If you have a
* card we don't have the PCI id for, and looks like it should work,
* drop me mail with the id and "it works"/"it doesn't work".
*
* Note: if everything gets detected fine but it doesn't actually send
- * or receive packets, your first port of call should probably be to
+ * or receive packets, your first port of call should probably be to
* try newer firmware in the card. Especially if you're doing Ad-Hoc
- * modes
+ * modes.
*
* The actual driving is done by orinoco.c, this is just resource
* allocation stuff.
@@ -61,32 +61,26 @@
#include <pcmcia/cisreg.h>
#include "orinoco.h"
+#include "orinoco_pci.h"
#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
#define COR_RESET (0x80) /* reset bit in the COR register */
#define TMD_RESET_TIME (500) /* milliseconds */
-/* Orinoco TMD specific data */
-struct orinoco_tmd_card {
- u32 tmd_io;
-};
-
-
/*
* Do a soft reset of the card using the Configuration Option Register
*/
static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
{
hermes_t *hw = &priv->hw;
- struct orinoco_tmd_card *card = priv->card;
- u32 addr = card->tmd_io;
+ struct orinoco_pci_card *card = priv->card;
unsigned long timeout;
u16 reg;
- outb(COR_VALUE | COR_RESET, addr);
+ iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
mdelay(1);
- outb(COR_VALUE, addr);
+ iowrite8(COR_VALUE, card->bridge_io);
mdelay(1);
/* Just in case, wait more until the card is no longer busy */
@@ -97,7 +91,7 @@ static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
reg = hermes_read_regn(hw, CMD);
}
- /* Did we timeout ? */
+ /* Still busy? */
if (reg & HERMES_CMD_BUSY) {
printk(KERN_ERR PFX "Busy timeout\n");
return -ETIMEDOUT;
@@ -110,11 +104,11 @@ static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
static int orinoco_tmd_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- int err = 0;
- struct orinoco_private *priv = NULL;
- struct orinoco_tmd_card *card;
- struct net_device *dev = NULL;
- void __iomem *mem;
+ int err;
+ struct orinoco_private *priv;
+ struct orinoco_pci_card *card;
+ struct net_device *dev;
+ void __iomem *hermes_io, *bridge_io;
err = pci_enable_device(pdev);
if (err) {
@@ -123,20 +117,28 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
}
err = pci_request_regions(pdev, DRIVER_NAME);
- if (err != 0) {
+ if (err) {
printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
goto fail_resources;
}
- mem = pci_iomap(pdev, 2, 0);
- if (! mem) {
- err = -ENOMEM;
- goto fail_iomap;
+ bridge_io = pci_iomap(pdev, 1, 0);
+ if (!bridge_io) {
+ printk(KERN_ERR PFX "Cannot map bridge registers\n");
+ err = -EIO;
+ goto fail_map_bridge;
+ }
+
+ hermes_io = pci_iomap(pdev, 2, 0);
+ if (!hermes_io) {
+ printk(KERN_ERR PFX "Cannot map chipset registers\n");
+ err = -EIO;
+ goto fail_map_hermes;
}
/* Allocate network device */
dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset);
- if (! dev) {
+ if (!dev) {
printk(KERN_ERR PFX "Cannot allocate network device\n");
err = -ENOMEM;
goto fail_alloc;
@@ -144,16 +146,11 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
priv = netdev_priv(dev);
card = priv->card;
- card->tmd_io = pci_resource_start(pdev, 1);
- dev->base_addr = pci_resource_start(pdev, 2);
+ card->bridge_io = bridge_io;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING);
-
- printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 TMD device "
- "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq,
- dev->base_addr);
+ hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
dev->name, dev);
@@ -162,7 +159,7 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
err = -EBUSY;
goto fail_irq;
}
- dev->irq = pdev->irq;
+ orinoco_pci_setup_netdev(dev, pdev, 2);
err = orinoco_tmd_cor_reset(priv);
if (err) {
@@ -188,9 +185,12 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
free_orinocodev(dev);
fail_alloc:
- pci_iounmap(pdev, mem);
+ pci_iounmap(pdev, hermes_io);
- fail_iomap:
+ fail_map_hermes:
+ pci_iounmap(pdev, bridge_io);
+
+ fail_map_bridge:
pci_release_regions(pdev);
fail_resources:
@@ -203,110 +203,32 @@ static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct orinoco_private *priv = dev->priv;
-
- BUG_ON(! dev);
+ struct orinoco_pci_card *card = priv->card;
unregister_netdev(dev);
free_irq(dev->irq, dev);
pci_set_drvdata(pdev, NULL);
free_orinocodev(dev);
pci_iounmap(pdev, priv->hw.iobase);
+ pci_iounmap(pdev, card->bridge_io);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
-static int orinoco_tmd_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
- dev->name);
- return err;
- }
-
- err = __orinoco_down(dev);
- if (err)
- printk(KERN_WARNING "%s: error %d bringing interface down "
- "for suspend\n", dev->name, err);
-
- netif_device_detach(dev);
-
- priv->hw_unavailable++;
-
- orinoco_unlock(priv, &flags);
-
- free_irq(pdev->irq, dev);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-static int orinoco_tmd_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct orinoco_private *priv = netdev_priv(dev);
- unsigned long flags;
- int err;
-
- pci_set_power_state(pdev, 0);
- pci_enable_device(pdev);
- pci_restore_state(pdev);
-
- err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
- dev->name, dev);
- if (err) {
- printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
- dev->name);
- pci_disable_device(pdev);
- return -EBUSY;
- }
-
- err = orinoco_reinit_firmware(dev);
- if (err) {
- printk(KERN_ERR "%s: error %d re-initializing firmware "
- "on resume\n", dev->name, err);
- return err;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- netif_device_attach(dev);
-
- priv->hw_unavailable--;
-
- if (priv->open && (! priv->hw_unavailable)) {
- err = __orinoco_up(dev);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card on resume\n",
- dev->name, err);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static struct pci_device_id orinoco_tmd_pci_id_table[] = {
+static struct pci_device_id orinoco_tmd_id_table[] = {
{0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
{0,},
};
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_pci_id_table);
+MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
static struct pci_driver orinoco_tmd_driver = {
.name = DRIVER_NAME,
- .id_table = orinoco_tmd_pci_id_table,
+ .id_table = orinoco_tmd_id_table,
.probe = orinoco_tmd_init_one,
.remove = __devexit_p(orinoco_tmd_remove_one),
- .suspend = orinoco_tmd_suspend,
- .resume = orinoco_tmd_resume,
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
};
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
@@ -324,7 +246,6 @@ static int __init orinoco_tmd_init(void)
static void __exit orinoco_tmd_exit(void)
{
pci_unregister_driver(&orinoco_tmd_driver);
- ssleep(1);
}
module_init(orinoco_tmd_init);