Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 53 insertions, 13 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index dc88baefa72..0397bbf0ce0 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -480,7 +480,8 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_is_pcie(rt2x00dev) &&
 	    (rt2x00_rt(rt2x00dev, RT3572) ||
-	     rt2x00_rt(rt2x00dev, RT5390))) {
+	     rt2x00_rt(rt2x00dev, RT5390) ||
+	     rt2x00_rt(rt2x00dev, RT5392))) {
 		rt2x00pci_register_read(rt2x00dev, AUX_CTRL, &reg);
 		rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 		rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
@@ -489,7 +490,7 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
 
-	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	reg = 0;
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
@@ -501,11 +502,27 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
+	int retval;
+
 	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800pci_init_queues(rt2x00dev)))
 		return -EIO;
 
-	return rt2800_enable_radio(rt2x00dev);
+	retval = rt2800_enable_radio(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/* After resume MCU_BOOT_SIGNAL will trash these. */
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+
+	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02);
+	rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF);
+
+	rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0);
+	rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
+
+	return retval;
 }
 
 static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
@@ -521,14 +538,16 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE) {
-		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
-		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP,
+				   0, 0x02);
+		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
 	} else if (state == STATE_SLEEP) {
 		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
 					 0xffffffff);
 		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
 					 0xffffffff);
-		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP,
+				   0xff, 0x01);
 	}
 
 	return 0;
@@ -541,13 +560,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 
 	switch (state) {
 	case STATE_RADIO_ON:
-		/*
-		 * Before the radio can be enabled, the device first has
-		 * to be woken up. After that it needs a bit of time
-		 * to be fully awake and then the radio can be enabled.
-		 */
-		rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
-		msleep(1);
 		retval = rt2800pci_enable_radio(rt2x00dev);
 		break;
 	case STATE_RADIO_OFF:
@@ -797,7 +809,33 @@ static void rt2800pci_pretbtt_tasklet(unsigned long data)
 static void rt2800pci_tbtt_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+	u32 reg;
+
 	rt2x00lib_beacondone(rt2x00dev);
+
+	if (rt2x00dev->intf_ap_count) {
+		/*
+		 * The rt2800pci hardware tbtt timer is off by 1us per tbtt
+		 * causing beacon skew and as a result causing problems with
+		 * some powersaving clients over time. Shorten the beacon
+		 * interval every 64 beacons by 64us to mitigate this effect.
+		 */
+		if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
+			rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+					   (rt2x00dev->beacon_int * 16) - 1);
+			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		} else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
+			rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+					   (rt2x00dev->beacon_int * 16));
+			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		}
+		drv_data->tbtt_tick++;
+		drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
+	}
+
 	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
 }
@@ -1050,6 +1088,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
 	.gain_calibration	= rt2800_gain_calibration,
+	.vco_calibration	= rt2800_vco_calibration,
 	.start_queue		= rt2800pci_start_queue,
 	.kick_queue		= rt2800pci_kick_queue,
 	.stop_queue		= rt2800pci_stop_queue,
@@ -1093,6 +1132,7 @@ static const struct data_queue_desc rt2800pci_queue_bcn = {
 
 static const struct rt2x00_ops rt2800pci_ops = {
 	.name			= KBUILD_MODNAME,
+	.drv_data_size		= sizeof(struct rt2800_drv_data),
 	.max_sta_intf		= 1,
 	.max_ap_intf		= 8,
 	.eeprom_size		= EEPROM_SIZE,