Merge tag 'master-2014-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-10-03

Please pull tihs batch of updates intended for the 3.18 stream!

For the iwlwifi bits, Emmanuel says:

"I have here a few things that depend on the latest mac80211's changes:
RRM, TPC, Quiet Period etc...  Eyal keeps improving our rate control
and we have a new device ID. This last patch should probably have
gone to wireless.git, but at that stage, I preferred to send it to
-next and CC stable."

For (most of) the Atheros bits, Kalle says:

"The only new feature is testmode support from me. Ben added a new method
to crash the firmware with an assert for debug purposes. As usual, we
have lots of smaller fixes from Michal. Matteo fixed a Kconfig
dependency with debugfs. I fixed some warnings recently added to
checkpatch."

For the NFC bits, Samuel says:

"We've had major updates for TI and ST Microelectronics drivers, and a
few NCI related changes.

For TI's trf7970a driver:

- Target mode support for trf7970a
- Suspend/resume support for trf7970a
- DT properties additions to handle different quirks
- A bunch of fixes for smartphone IOP related issues

For ST Microelectronics' ST21NFCA and ST21NFCB drivers:

- ISO15693 support for st21nfcb
- checkpatch and sparse related warning fixes
- Code cleanups and a few minor fixes

Finally, Marvell added ISO15693 support to the NCI stack, together with a
couple of NCI fixes."

For the Bluetooth bits, Johan says:

"This 3.18 pull request replaces the one I did on Monday ("bluetooth-next
2014-09-22", which hasn't been pulled yet). The additions since the last
request are:

 - SCO connection fix for devices not supporting eSCO
 - Cleanups regarding the SCO establishment logic
 - Remove unnecessary return value from logging functions
 - Header compression fix for 6lowpan
 - Cleanups to the ieee802154/mrf24j40 driver

Here's a copy from previous request that this one replaces:

'
Here are some more patches for 3.18. They include various fixes to the
btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the
MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring).

I've held on to this pull request a bit since we were waiting for a SCO
related fix to get sorted out first. However, since the merge window is
getting closer I decided not to wait for it. If we do get the fix sorted
out there'll probably be a second small pull request later this week.
'"

And,

"Unless 3.17 gets delayed this will probably be our last -next pull request for
3.18. We've got:

  - New Marvell hardware supportr
  - Multicast support for 6lowpan
  - Several of 6lowpan fixes & cleanups
  - Fix for a (false-positive) lockdep warning in L2CAP
  - Minor btusb cleanup"

On top of all that comes the usual sort of updates to ath5k, ath9k,
ath10k, brcmfmac, mwifiex, and wil6210.  This time around there are
also a number of rtlwifi updates to enable some new hardware and
to reconcile the in-kernel drivers with some newer releases of the
Realtek vendor drivers.  Also of note is some device tree work for
the bcma bus.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 340 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h
new file mode 100644
index 00000000000..781eeaa6af4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h
@@ -0,0 +1,340 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92E_PWRSEQ_H__
+#define __RTL92E_PWRSEQ_H__
+
+#include "../pwrseqcmd.h"
+/**
+ *	Check document WM-20110607-Paul-RTL8192E_Power_Architecture-R02.vsd
+ *	There are 6 HW Power States:
+ *	0: POFF--Power Off
+ *	1: PDN--Power Down
+ *	2: CARDEMU--Card Emulation
+ *	3: ACT--Active Mode
+ *	4: LPS--Low Power State
+ *	5: SUS--Suspend
+ *
+ *	The transision from different states are defined below
+ *	TRANS_CARDEMU_TO_ACT
+ *	TRANS_ACT_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_SUS
+ *	TRANS_SUS_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_PDN
+ *	TRANS_ACT_TO_LPS
+ *	TRANS_LPS_TO_ACT
+ *
+ *	TRANS_END
+ *	PWR SEQ Version: rtl8192E_PwrSeq_V09.h
+ */
+
+#define	RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS	18
+#define	RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS	18
+#define	RTL8192E_TRANS_SUS_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS	18
+#define	RTL8192E_TRANS_PDN_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_ACT_TO_LPS_STEPS		23
+#define	RTL8192E_TRANS_LPS_TO_ACT_STEPS		23
+#define	RTL8192E_TRANS_END_STEPS		1
+
+#define RTL8192E_TRANS_CARDEMU_TO_ACT					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* disable HWPDN 0x04[15]=0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},			\
+	/* disable SW LPS 0x04[10]=0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0},			\
+	/* disable WL suspend*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},		\
+	/* wait till 0x04[17] = 1    power ready*/			\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/* release WLON reset  0x04[16]=1*/				\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/* polling until return 0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/**/								\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(0), 0},
+
+#define RTL8192E_TRANS_ACT_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x1F[7:0] = 0 turn off RF*/					\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0},			\
+	/*0x4C[23]=0x4E[7]=0, switch DPDT_SEL_P output from register 0x65[2] */\
+	{0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},			\
+	/*0x04[9] = 1 turn off MAC by HW state machine*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	/*wait till 0x04[9] = 0 polling until return 0 to disable*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_SUS					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))},\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},				\
+	/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	 /*wait power state to suspend*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_SUS_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_CARDDIS				\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x07=0x20 , SOP option to disable BG/MB*/			\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x20},			\
+	/*Unlock small LDO Register*/					\
+	{0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)},		\
+	/*Disable small LDO*/						\
+	{0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
+	 PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},				\
+	/*0x04[10] = 1, enable SW LPS*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)},		\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDDIS_TO_CARDEMU				\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/*Enable small LDO*/						\
+	{0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/*Lock small LDO Register*/					\
+	{0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0},			\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_PDN					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* 0x04[16] = 0*/						\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/* 0x04[15] = 1*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8192E_TRANS_PDN_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* 0x04[15] = 0*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8192E_TRANS_ACT_TO_LPS					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*PCIe DMA stop*/						\
+	{0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/*Tx Pause*/							\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*CCK and OFDM are disabled,and clock are gated*/		\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*Delay 1us*/							\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},		\
+	/*Whole BB is reset*/						\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0},			\
+	/*Reset MAC TRX*/						\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x03},			\
+	/*check if removed later*/					\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0},			\
+	/*When driver enter Sus/ Disable, enable LOP for BT*/		\
+	{0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x00},			\
+	/*Respond TxOK to scheduler*/					\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8192E_TRANS_LPS_TO_ACT					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*SDIO RPWM, For Repeatly In and out, Taggle bit should be changed*/\
+	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, 0xFF, 0x84},		\
+	/*USB RPWM*/							\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84},			\
+	/*PCIe RPWM*/							\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84},			\
+	/*Delay*/							\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS},		\
+	/*0x08[4] = 0 switch TSF to 40M*/				\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4), 0},			\
+	/*Polling 0x109[7]=0  TSF in 40M*/				\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(7), 0},		\
+	/*0x101[1] = 1*/						\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	/*0x100[7:0] = 0xFF  enable WMAC TRX*/				\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/* 0x02[1:0] = 2b'11 enable BB macro*/				\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)},\
+	/*0x522 = 0*/							\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0},			\
+	/*Clear ISR*/							\
+	{0x013D, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},
+
+#define RTL8192E_TRANS_END						\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 0, PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8192E_power_on_flow
+					[RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_radio_off_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_disable_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_enable_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_suspend_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_resume_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_hwpdn_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_enter_lps_flow
+					[RTL8192E_TRANS_ACT_TO_LPS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_leave_lps_flow
+					[RTL8192E_TRANS_LPS_TO_ACT_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+
+/* RTL8192EE Power Configuration CMDs for PCIe interface */
+#define RTL8192E_NIC_PWR_ON_FLOW	rtl8192E_power_on_flow
+#define RTL8192E_NIC_RF_OFF_FLOW	rtl8192E_radio_off_flow
+#define RTL8192E_NIC_DISABLE_FLOW	rtl8192E_card_disable_flow
+#define RTL8192E_NIC_ENABLE_FLOW	rtl8192E_card_enable_flow
+#define RTL8192E_NIC_SUSPEND_FLOW	rtl8192E_suspend_flow
+#define RTL8192E_NIC_RESUME_FLOW	rtl8192E_resume_flow
+#define RTL8192E_NIC_PDN_FLOW		rtl8192E_hwpdn_flow
+#define RTL8192E_NIC_LPS_ENTER_FLOW	rtl8192E_enter_lps_flow
+#define RTL8192E_NIC_LPS_LEAVE_FLOW	rtl8192E_leave_lps_flow
+
+#endif