Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 810 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
new file mode 100644
index 00000000000..90113e9cd69
--- /dev/null
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -0,0 +1,810 @@
+/*
+ * Standard Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+#include "../pci.h"
+#include "shpchp.h"
+#ifndef CONFIG_IA64
+#include "../../../arch/i386/pci/pci.h"    /* horrible hack showing how processor dependant we are... */
+#endif
+
+int shpchp_configure_device (struct controller* ctrl, struct pci_func* func)  
+{
+	unsigned char bus;
+	struct pci_bus *child;
+	int num;
+
+	if (func->pci_dev == NULL)
+		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+
+	/* Still NULL ? Well then scan for it ! */
+	if (func->pci_dev == NULL) {
+		num = pci_scan_slot(ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function));
+		if (num) {
+			dbg("%s: subordiante %p number %x\n", __FUNCTION__, ctrl->pci_dev->subordinate,
+				ctrl->pci_dev->subordinate->number);
+			pci_bus_add_devices(ctrl->pci_dev->subordinate);
+		}
+		
+		func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+		if (func->pci_dev == NULL) {
+			dbg("ERROR: pci_dev still null\n");
+			return 0;
+		}
+	}
+
+	if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus);
+		child = pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus);
+		pci_do_scan_bus(child);
+
+	}
+
+	return 0;
+}
+
+
+int shpchp_unconfigure_device(struct pci_func* func) 
+{
+	int rc = 0;
+	int j;
+	
+	dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
+				func->device, func->function);
+
+	for (j=0; j<8 ; j++) {
+		struct pci_dev* temp = pci_find_slot(func->bus,
+				(func->device << 3) | j);
+		if (temp) {
+			pci_remove_bus_device(temp);
+		}
+	}
+	return rc;
+}
+
+/*
+ * shpchp_set_irq
+ *
+ * @bus_num: bus number of PCI device
+ * @dev_num: device number of PCI device
+ * @slot: pointer to u8 where slot number will be returned
+ */
+int shpchp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
+{
+#if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64)
+	int rc;
+	u16 temp_word;
+	struct pci_dev fakedev;
+	struct pci_bus fakebus;
+
+	fakedev.devfn = dev_num << 3;
+	fakedev.bus = &fakebus;
+	fakebus.number = bus_num;
+	dbg("%s: dev %d, bus %d, pin %d, num %d\n",
+	    __FUNCTION__, dev_num, bus_num, int_pin, irq_num);
+	rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num);
+	dbg("%s: rc %d\n", __FUNCTION__, rc);
+	if (!rc)
+		return !rc;
+
+	/* set the Edge Level Control Register (ELCR) */
+	temp_word = inb(0x4d0);
+	temp_word |= inb(0x4d1) << 8;
+
+	temp_word |= 0x01 << irq_num;
+
+	/* This should only be for x86 as it sets the Edge Level Control Register */
+	outb((u8) (temp_word & 0xFF), 0x4d0);
+	outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
+#endif
+	return 0;
+}
+
+/* More PCI configuration routines; this time centered around hotplug controller */
+
+
+/*
+ * shpchp_save_config
+ *
+ * Reads configuration for all slots in a PCI bus and saves info.
+ *
+ * Note:  For non-hot plug busses, the slot # saved is the device #
+ *
+ * returns 0 if success
+ */
+int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
+{
+	int rc;
+	u8 class_code;
+	u8 header_type;
+	u32 ID;
+	u8 secondary_bus;
+	struct pci_func *new_slot;
+	int sub_bus;
+	int FirstSupported;
+	int LastSupported;
+	int max_functions;
+	int function;
+	u8 DevError;
+	int device = 0;
+	int cloop = 0;
+	int stop_it;
+	int index;
+	int is_hot_plug = num_ctlr_slots || first_device_num;
+	struct pci_bus lpci_bus, *pci_bus;
+
+	dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
+				num_ctlr_slots, first_device_num);
+
+	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+	pci_bus = &lpci_bus;
+
+	dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
+				num_ctlr_slots, first_device_num);
+
+	/*   Decide which slots are supported */
+	if (is_hot_plug) {
+		/*********************************
+		 *  is_hot_plug is the slot mask
+		 *********************************/
+		FirstSupported = first_device_num;
+		LastSupported = FirstSupported + num_ctlr_slots - 1;
+	} else {
+		FirstSupported = 0;
+		LastSupported = 0x1F;
+	}
+
+	dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
+					LastSupported);
+
+	/*   Save PCI configuration space for all devices in supported slots */
+	pci_bus->number = busnumber;
+	for (device = FirstSupported; device <= LastSupported; device++) {
+		ID = 0xFFFFFFFF;
+		rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
+					PCI_VENDOR_ID, &ID);
+
+		if (ID != 0xFFFFFFFF) {	  /*  device in slot */
+			rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
+					0x0B, &class_code);
+			if (rc)
+				return rc;
+
+			rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
+					PCI_HEADER_TYPE, &header_type);
+			if (rc)
+				return rc;
+
+			dbg("class_code = %x, header_type = %x\n", class_code, header_type);
+
+			/* If multi-function device, set max_functions to 8 */
+			if (header_type & 0x80)
+				max_functions = 8;
+			else
+				max_functions = 1;
+
+			function = 0;
+
+			do {
+				DevError = 0;
+
+				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   /* P-P Bridge */
+					/* Recurse the subordinate bus
+					 * get the subordinate bus number
+					 */
+					rc = pci_bus_read_config_byte(pci_bus,
+						PCI_DEVFN(device, function), 
+						PCI_SECONDARY_BUS, &secondary_bus);
+					if (rc) {
+						return rc;
+					} else {
+						sub_bus = (int) secondary_bus;
+
+						/* Save secondary bus cfg spc with this recursive call. */
+						rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
+						if (rc)
+							return rc;
+					}
+				}
+
+				index = 0;
+				new_slot = shpchp_slot_find(busnumber, device, index++);
+
+				dbg("new_slot = %p\n", new_slot);
+
+				while (new_slot && (new_slot->function != (u8) function)) {
+					new_slot = shpchp_slot_find(busnumber, device, index++);
+					dbg("new_slot = %p\n", new_slot);
+				}
+				if (!new_slot) {
+					/* Setup slot structure. */
+					new_slot = shpchp_slot_create(busnumber);
+					dbg("new_slot = %p\n", new_slot);
+
+					if (new_slot == NULL)
+						return(1);
+				}
+
+				new_slot->bus = (u8) busnumber;
+				new_slot->device = (u8) device;
+				new_slot->function = (u8) function;
+				new_slot->is_a_board = 1;
+				new_slot->switch_save = 0x10;
+				new_slot->pwr_save = 1;
+				/* In case of unsupported board */
+				new_slot->status = DevError;
+				new_slot->pci_dev = pci_find_slot(new_slot->bus,
+					(new_slot->device << 3) | new_slot->function);
+				dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
+
+				for (cloop = 0; cloop < 0x20; cloop++) {
+					rc = pci_bus_read_config_dword(pci_bus,
+						PCI_DEVFN(device, function), 
+						cloop << 2,
+						(u32 *) &(new_slot->config_space [cloop]));
+					/* dbg("new_slot->config_space[%x] = %x\n",
+						cloop, new_slot->config_space[cloop]); */
+					if (rc)
+						return rc;
+				}
+
+				function++;
+
+				stop_it = 0;
+
+				/*  this loop skips to the next present function
+				 *  reading in Class Code and Header type.
+				 */
+
+				while ((function < max_functions)&&(!stop_it)) {
+					rc = pci_bus_read_config_dword(pci_bus,
+						PCI_DEVFN(device, function),
+						PCI_VENDOR_ID, &ID);
+
+					if (ID == 0xFFFFFFFF) {  /* nothing there. */
+						function++;
+						dbg("Nothing there\n");
+					} else {  /* Something there */
+						rc = pci_bus_read_config_byte(pci_bus,
+							PCI_DEVFN(device, function), 
+							0x0B, &class_code);
+						if (rc)
+							return rc;
+
+						rc = pci_bus_read_config_byte(pci_bus,
+							PCI_DEVFN(device, function), 
+							PCI_HEADER_TYPE, &header_type);
+						if (rc)
+							return rc;
+
+						dbg("class_code = %x, header_type = %x\n",
+							class_code, header_type);
+						stop_it++;
+					}
+				}
+
+			} while (function < max_functions);
+			/* End of IF (device in slot?) */
+		} else if (is_hot_plug) {
+			/* Setup slot structure with entry for empty slot */
+			new_slot = shpchp_slot_create(busnumber);
+
+			if (new_slot == NULL) {
+				return(1);
+			}
+			dbg("new_slot = %p\n", new_slot);
+
+			new_slot->bus = (u8) busnumber;
+			new_slot->device = (u8) device;
+			new_slot->function = 0;
+			new_slot->is_a_board = 0;
+			new_slot->presence_save = 0;
+			new_slot->switch_save = 0;
+		}
+	}			/* End of FOR loop */
+
+	return(0);
+}
+
+
+/*
+ * shpchp_save_slot_config
+ *
+ * Saves configuration info for all PCI devices in a given slot
+ * including subordinate busses.
+ *
+ * returns 0 if success
+ */
+int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
+{
+	int rc;
+	u8 class_code;
+	u8 header_type;
+	u32 ID;
+	u8 secondary_bus;
+	int sub_bus;
+	int max_functions;
+	int function;
+	int cloop = 0;
+	int stop_it;
+	struct pci_bus lpci_bus, *pci_bus;
+	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+	pci_bus = &lpci_bus;
+	pci_bus->number = new_slot->bus;
+
+	ID = 0xFFFFFFFF;
+
+	pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
+					PCI_VENDOR_ID, &ID);
+
+	if (ID != 0xFFFFFFFF) {	  /*  device in slot */
+		pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
+					0x0B, &class_code);
+
+		pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
+					PCI_HEADER_TYPE, &header_type);
+
+		if (header_type & 0x80)	/* Multi-function device */
+			max_functions = 8;
+		else
+			max_functions = 1;
+
+		function = 0;
+
+		do {
+			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  /* PCI-PCI Bridge */
+				/*  Recurse the subordinate bus */
+				pci_bus_read_config_byte(pci_bus,
+					PCI_DEVFN(new_slot->device, function), 
+					PCI_SECONDARY_BUS, &secondary_bus);
+
+				sub_bus = (int) secondary_bus;
+
+				/* Save the config headers for the secondary bus. */
+				rc = shpchp_save_config(ctrl, sub_bus, 0, 0);
+
+				if (rc)
+					return rc;
+
+			}	/* End of IF */
+
+			new_slot->status = 0;
+
+			for (cloop = 0; cloop < 0x20; cloop++) {
+				pci_bus_read_config_dword(pci_bus,
+					PCI_DEVFN(new_slot->device, function), 
+					cloop << 2,
+					(u32 *) &(new_slot->config_space [cloop]));
+			}
+
+			function++;
+
+			stop_it = 0;
+
+			/*  this loop skips to the next present function
+			 *  reading in the Class Code and the Header type.
+			 */
+
+			while ((function < max_functions) && (!stop_it)) {
+				pci_bus_read_config_dword(pci_bus,
+					PCI_DEVFN(new_slot->device, function),
+					PCI_VENDOR_ID, &ID);
+
+				if (ID == 0xFFFFFFFF) {	 /* nothing there. */
+					function++;
+				} else {  /* Something there */
+					pci_bus_read_config_byte(pci_bus,
+						PCI_DEVFN(new_slot->device, function),
+						0x0B, &class_code);
+
+					pci_bus_read_config_byte(pci_bus,
+						PCI_DEVFN(new_slot->device, function),
+						PCI_HEADER_TYPE, &header_type);
+
+					stop_it++;
+				}
+			}
+
+		} while (function < max_functions);
+	}			/* End of IF (device in slot?) */
+	else {
+		return 2;
+	}
+
+	return 0;
+}
+
+
+/*
+ * shpchp_save_used_resources
+ *
+ * Stores used resource information for existing boards.  this is
+ * for boards that were in the system when this driver was loaded.
+ * this function is for hot plug ADD
+ *
+ * returns 0 if success
+ * if disable  == 1(DISABLE_CARD),
+ *  it loops for all functions of the slot and disables them.
+ * else, it just get resources of the function and return.
+ */
+int shpchp_save_used_resources(struct controller *ctrl, struct pci_func *func, int disable)
+{
+	u8 cloop;
+	u8 header_type;
+	u8 secondary_bus;
+	u8 temp_byte;
+	u16 command;
+	u16 save_command;
+	u16 w_base, w_length;
+	u32 temp_register;
+	u32 save_base;
+	u32 base, length;
+	u64 base64 = 0;
+	int index = 0;
+	unsigned int devfn;
+	struct pci_resource *mem_node = NULL;
+	struct pci_resource *p_mem_node = NULL;
+	struct pci_resource *t_mem_node;
+	struct pci_resource *io_node;
+	struct pci_resource *bus_node;
+	struct pci_bus lpci_bus, *pci_bus;
+	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+	pci_bus = &lpci_bus;
+
+	if (disable)
+		func = shpchp_slot_find(func->bus, func->device, index++);
+
+	while ((func != NULL) && func->is_a_board) {
+		pci_bus->number = func->bus;
+		devfn = PCI_DEVFN(func->device, func->function);
+
+		/* Save the command register */
+		pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
+
+		if (disable) {
+			/* disable card */
+			command = 0x00;
+			pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
+		}
+
+		/* Check for Bridge */
+		pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+
+		if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {     /* PCI-PCI Bridge */
+			dbg("Save_used_res of PCI bridge b:d=0x%x:%x, sc=0x%x\n",
+					func->bus, func->device, save_command);
+			if (disable) {
+				/* Clear Bridge Control Register */
+				command = 0x00;
+				pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
+			}
+
+			pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
+			pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte);
+
+			bus_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+			if (!bus_node)
+				return -ENOMEM;
+
+			bus_node->base = (ulong)secondary_bus;
+			bus_node->length = (ulong)(temp_byte - secondary_bus + 1);
+
+			bus_node->next = func->bus_head;
+			func->bus_head = bus_node;
+
+			/* Save IO base and Limit registers */
+			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &temp_byte);
+			base = temp_byte;
+			pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &temp_byte);
+			length = temp_byte;
+
+			if ((base <= length) && (!disable || (save_command & PCI_COMMAND_IO))) {
+				io_node = kmalloc(sizeof(struct pci_resource),
+							GFP_KERNEL);
+				if (!io_node)
+					return -ENOMEM;
+
+				io_node->base = (ulong)(base & PCI_IO_RANGE_MASK) << 8;
+				io_node->length = (ulong)(length - base + 0x10) << 8;
+
+				io_node->next = func->io_head;
+				func->io_head = io_node;
+			}
+
+			/* Save memory base and Limit registers */
+			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
+			pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
+
+			if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
+				mem_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+				if (!mem_node)
+					return -ENOMEM;
+
+				mem_node->base = (ulong)w_base << 16;
+				mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
+
+				mem_node->next = func->mem_head;
+				func->mem_head = mem_node;
+			}
+			/* Save prefetchable memory base and Limit registers */
+			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
+			pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
+
+			if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) {
+				p_mem_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+				if (!p_mem_node)
+					return -ENOMEM;
+
+				p_mem_node->base = (ulong)w_base << 16;
+				p_mem_node->length = (ulong)(w_length - w_base + 0x10) << 16;
+
+				p_mem_node->next = func->p_mem_head;
+				func->p_mem_head = p_mem_node;
+			}
+		} else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+			dbg("Save_used_res of PCI adapter b:d=0x%x:%x, sc=0x%x\n",
+					func->bus, func->device, save_command);
+
+			/* Figure out IO and memory base lengths */
+			for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
+				pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
+
+				temp_register = 0xFFFFFFFF;
+				pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register);
+				pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
+
+				if (!disable)
+					pci_bus_write_config_dword(pci_bus, devfn, cloop, save_base);
+
+				if (!temp_register)
+					continue;
+
+				base = temp_register;
+
+				if ((base & PCI_BASE_ADDRESS_SPACE_IO) &&
+						(!disable || (save_command & PCI_COMMAND_IO))) {
+					/* IO base */
+					/* set temp_register = amount of IO space requested */
+					base = base & 0xFFFFFFFCL;
+					base = (~base) + 1;
+
+					io_node =  kmalloc(sizeof (struct pci_resource),
+								GFP_KERNEL);
+					if (!io_node)
+						return -ENOMEM;
+
+					io_node->base = (ulong)save_base & PCI_BASE_ADDRESS_IO_MASK;
+					io_node->length = (ulong)base;
+					dbg("sur adapter: IO bar=0x%x(length=0x%x)\n",
+						io_node->base, io_node->length);
+
+					io_node->next = func->io_head;
+					func->io_head = io_node;
+				} else {  /* map Memory */
+					int prefetchable = 1;
+					/* struct pci_resources **res_node; */
+					char *res_type_str = "PMEM";
+					u32 temp_register2;
+
+					t_mem_node = kmalloc(sizeof (struct pci_resource),
+								GFP_KERNEL);
+					if (!t_mem_node)
+						return -ENOMEM;
+
+					if (!(base & PCI_BASE_ADDRESS_MEM_PREFETCH) &&
+							(!disable || (save_command & PCI_COMMAND_MEMORY))) {
+						prefetchable = 0;
+						mem_node = t_mem_node;
+						res_type_str++;
+					} else
+						p_mem_node = t_mem_node;
+
+					base = base & 0xFFFFFFF0L;
+					base = (~base) + 1;
+
+					switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
+					case PCI_BASE_ADDRESS_MEM_TYPE_32:
+						if (prefetchable) {
+							p_mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
+							p_mem_node->length = (ulong)base;
+							dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
+								res_type_str, 
+								p_mem_node->base,
+								p_mem_node->length);
+
+							p_mem_node->next = func->p_mem_head;
+							func->p_mem_head = p_mem_node;
+						} else {
+							mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK;
+							mem_node->length = (ulong)base;
+							dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n",
+								res_type_str, 
+								mem_node->base,
+								mem_node->length);
+
+							mem_node->next = func->mem_head;
+							func->mem_head = mem_node;
+						}
+						break;
+					case PCI_BASE_ADDRESS_MEM_TYPE_64:
+						pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
+						base64 = temp_register2;
+						base64 = (base64 << 32) | save_base;
+
+						if (temp_register2) {
+							dbg("sur adapter: 64 %s high dword of base64(0x%x:%x) masked to 0\n", 
+								res_type_str, temp_register2, (u32)base64);
+							base64 &= 0x00000000FFFFFFFFL;
+						}
+
+						if (prefetchable) {
+							p_mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
+							p_mem_node->length = base;
+							dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
+								res_type_str, 
+								p_mem_node->base,
+								p_mem_node->length);
+
+							p_mem_node->next = func->p_mem_head;
+							func->p_mem_head = p_mem_node;
+						} else {
+							mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK;
+							mem_node->length = base;
+							dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n",
+								res_type_str, 
+								mem_node->base,
+								mem_node->length);
+
+							mem_node->next = func->mem_head;
+							func->mem_head = mem_node;
+						}
+						cloop += 4;
+						break;
+					default:
+						dbg("asur: reserved BAR type=0x%x\n",
+							temp_register);
+						break;
+					}
+				} 
+			}	/* End of base register loop */
+		} else {	/* Some other unknown header type */
+			dbg("Save_used_res of PCI unknown type b:d=0x%x:%x. skip.\n",
+					func->bus, func->device);
+		}
+
+		/* find the next device in this slot */
+		if (!disable)
+			break;
+		func = shpchp_slot_find(func->bus, func->device, index++);
+	}
+
+	return 0;
+}
+
+/**
+ * kfree_resource_list: release memory of all list members
+ * @res: resource list to free
+ */
+static inline void
+return_resource_list(struct pci_resource **func, struct pci_resource **res)
+{
+	struct pci_resource *node;
+	struct pci_resource *t_node;
+
+	node = *func;
+	*func = NULL;
+	while (node) {
+		t_node = node->next;
+		return_resource(res, node);
+		node = t_node;
+	}
+}
+
+/*
+ * shpchp_return_board_resources
+ *
+ * this routine returns all resources allocated to a board to
+ * the available pool.
+ *
+ * returns 0 if success
+ */
+int shpchp_return_board_resources(struct pci_func * func,
+					struct resource_lists * resources)
+{
+	int rc;
+	dbg("%s\n", __FUNCTION__);
+
+	if (!func)
+		return 1;
+
+	return_resource_list(&(func->io_head),&(resources->io_head));
+	return_resource_list(&(func->mem_head),&(resources->mem_head));
+	return_resource_list(&(func->p_mem_head),&(resources->p_mem_head));
+	return_resource_list(&(func->bus_head),&(resources->bus_head));
+
+	rc = shpchp_resource_sort_and_combine(&(resources->mem_head));
+	rc |= shpchp_resource_sort_and_combine(&(resources->p_mem_head));
+	rc |= shpchp_resource_sort_and_combine(&(resources->io_head));
+	rc |= shpchp_resource_sort_and_combine(&(resources->bus_head));
+
+	return rc;
+}
+
+/**
+ * kfree_resource_list: release memory of all list members
+ * @res: resource list to free
+ */
+static inline void
+kfree_resource_list(struct pci_resource **r)
+{
+	struct pci_resource *res, *tres;
+
+	res = *r;
+	*r = NULL;
+
+	while (res) {
+		tres = res;
+		res = res->next;
+		kfree(tres);
+	}
+}
+
+/**
+ * shpchp_destroy_resource_list: put node back in the resource list
+ * @resources: list to put nodes back
+ */
+void shpchp_destroy_resource_list(struct resource_lists *resources)
+{
+	kfree_resource_list(&(resources->io_head));
+	kfree_resource_list(&(resources->mem_head));
+	kfree_resource_list(&(resources->p_mem_head));
+	kfree_resource_list(&(resources->bus_head));
+}
+
+/**
+ * shpchp_destroy_board_resources: put node back in the resource list
+ * @resources: list to put nodes back
+ */
+void shpchp_destroy_board_resources(struct pci_func * func)
+{
+	kfree_resource_list(&(func->io_head));
+	kfree_resource_list(&(func->mem_head));
+	kfree_resource_list(&(func->p_mem_head));
+	kfree_resource_list(&(func->bus_head));
+}