PCI PM: Avoid touching devices behind bridges in unknown state

It generally is better to avoid accessing devices behind bridges that
may not be in the D0 power state, because in that case the bridges'
secondary buses may not be accessible.  For this reason, during the
early phase of resume (ie. with interrupts disabled), before
restoring the standard config registers of a device, check the power
state of the bridge the device is behind and postpone the restoration
of the device's config space, as well as any other operations that
would involve accessing the device, if that state is not D0.

In such cases the restoration of the device's config space will be
retried during the "normal" phase of resume (ie. with interrupts
enabled), so that the bridge can be put into D0 before that happens.

Also, save standard configuration registers of PCI devices during the
"normal" phase of suspend (ie. with interrupts enabled), so that the
bridges the devices are behind can be put into low power states (we
don't put bridges into low power states at the moment, but we may
want to do it in the future and it seems reasonable to design for
that).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6e309c8b47d..e491fdedf70 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -527,7 +527,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
  * @dev: PCI device to handle.
  * @state: State to cache in case the device doesn't have the PM capability
  */
-static void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
+void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 {
 	if (dev->pm_cap) {
 		u16 pmcsr;