pinctrl: Pass all configs to driver on pin_config_set()

When setting pin configuration in the pinctrl framework, pin_config_set() or
pin_config_group_set() is called in a loop to set one configuration at a time
for the specified pin or group.

This patch 1) removes the loop and 2) changes the API to pass the whole pin
config array to the driver.  It is now up to the driver to loop through the
configs.  This allows the driver to potentially combine configs and reduce the
number of writes to pin config registers.

All c files changed have been build-tested to verify the change compiles and
that the corresponding .o is successfully generated.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 78 insertions, 57 deletions

diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c
index 494ad4b8326..5bf01c28925 100644
--- a/drivers/pinctrl/pinctrl-tz1090-pdc.c
+++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c
@@ -737,39 +737,46 @@ static int tz1090_pdc_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static int tz1090_pdc_pinconf_set(struct pinctrl_dev *pctldev,
-				  unsigned int pin, unsigned long config)
+				  unsigned int pin, unsigned long *configs,
+				  unsigned num_configs)
 {
 	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-	enum pin_config_param param = pinconf_to_config_param(config);
-	unsigned int arg = pinconf_to_config_argument(config);
+	enum pin_config_param param;
+	unsigned int arg;
 	int ret;
 	u32 reg, width, mask, shift, val, tmp;
 	unsigned long flags;
+	int i;
 
-	dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n",
-		__func__, tz1090_pdc_pins[pin].name, config);
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
 
-	/* Get register information */
-	ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true,
-				     &reg, &width, &mask, &shift, &val);
-	if (ret < 0)
-		return ret;
+		dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n",
+			__func__, tz1090_pdc_pins[pin].name, configs[i]);
 
-	/* Unpack argument and range check it */
-	if (arg > 1) {
-		dev_dbg(pctldev->dev, "%s: arg %u out of range\n",
-			__func__, arg);
-		return -EINVAL;
-	}
+		/* Get register information */
+		ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true,
+					     &reg, &width, &mask, &shift, &val);
+		if (ret < 0)
+			return ret;
 
-	/* Write register field */
-	__global_lock2(flags);
-	tmp = pmx_read(pmx, reg);
-	tmp &= ~mask;
-	if (arg)
-		tmp |= val << shift;
-	pmx_write(pmx, tmp, reg);
-	__global_unlock2(flags);
+		/* Unpack argument and range check it */
+		if (arg > 1) {
+			dev_dbg(pctldev->dev, "%s: arg %u out of range\n",
+				__func__, arg);
+			return -EINVAL;
+		}
+
+		/* Write register field */
+		__global_lock2(flags);
+		tmp = pmx_read(pmx, reg);
+		tmp &= ~mask;
+		if (arg)
+			tmp |= val << shift;
+		pmx_write(pmx, tmp, reg);
+		__global_unlock2(flags);
+	} /* for each config */
 
 	return 0;
 }
@@ -860,54 +867,68 @@ static int tz1090_pdc_pinconf_group_get(struct pinctrl_dev *pctldev,
 
 static int tz1090_pdc_pinconf_group_set(struct pinctrl_dev *pctldev,
 					unsigned int group,
-					unsigned long config)
+					unsigned long *configs,
+					unsigned num_configs)
 {
 	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
 	const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group];
-	enum pin_config_param param = pinconf_to_config_param(config);
+	enum pin_config_param param;
 	const unsigned int *pit;
 	unsigned int i;
 	int ret, arg;
 	u32 reg, width, mask, shift, val;
 	unsigned long flags;
 	const int *map;
+	int j;
 
-	dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n",
-		__func__, g->name, config);
+	for (j = 0; j < num_configs; j++) {
+		param = pinconf_to_config_param(configs[j]);
 
-	/* Get register information */
-	ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true,
-					   &reg, &width, &mask, &shift, &map);
-	if (ret < 0) {
-		/*
-		 * Maybe we're trying to set a per-pin configuration of a group,
-		 * so do the pins one by one. This is mainly as a convenience.
-		 */
-		for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) {
-			ret = tz1090_pdc_pinconf_set(pctldev, *pit, config);
-			if (ret)
-				return ret;
-		}
-		return 0;
-	}
+		dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n",
+			__func__, g->name, configs[j]);
 
-	/* Unpack argument and map it to register value */
-	arg = pinconf_to_config_argument(config);
-	for (i = 0; i < BIT(width); ++i) {
-		if (map[i] == arg || (map[i] == -EINVAL && !arg)) {
-			/* Write register field */
-			__global_lock2(flags);
-			val = pmx_read(pmx, reg);
-			val &= ~mask;
-			val |= i << shift;
-			pmx_write(pmx, val, reg);
-			__global_unlock2(flags);
+		/* Get register information */
+		ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true,
+						   &reg, &width, &mask, &shift,
+						   &map);
+		if (ret < 0) {
+			/*
+			 * Maybe we're trying to set a per-pin configuration
+			 * of a group, so do the pins one by one. This is
+			 * mainly as a convenience.
+			 */
+			for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) {
+				ret = tz1090_pdc_pinconf_set(pctldev, *pit,
+					configs, num_configs);
+				if (ret)
+					return ret;
+			}
 			return 0;
 		}
-	}
 
-	dev_dbg(pctldev->dev, "%s: arg %u not supported\n",
-		__func__, arg);
+		/* Unpack argument and map it to register value */
+		arg = pinconf_to_config_argument(configs[j]);
+		for (i = 0; i < BIT(width); ++i) {
+			if (map[i] == arg || (map[i] == -EINVAL && !arg)) {
+				/* Write register field */
+				__global_lock2(flags);
+				val = pmx_read(pmx, reg);
+				val &= ~mask;
+				val |= i << shift;
+				pmx_write(pmx, val, reg);
+				__global_unlock2(flags);
+				goto next_config;
+			}
+		}
+
+		dev_dbg(pctldev->dev, "%s: arg %u not supported\n",
+			__func__, arg);
+		return 0;
+
+next_config:
+		;
+	} /* for each config */
+
 	return 0;
 }