Merge branch 'next' into for-linus

1 files changed, 15 insertions, 11 deletions

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 43410266f99..41a1495eec2 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -405,8 +405,8 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 	switch (buck) {
 	case MAX8998_BUCK1:
 		dev_dbg(max8998->dev,
-			"BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\
-			 buck1_vol3:%d, buck1_vol4:%d\n",
+			"BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n"
+			"buck1_vol3:%d, buck1_vol4:%d\n",
 			i, max8998->buck1_vol[0], max8998->buck1_vol[1],
 			max8998->buck1_vol[2], max8998->buck1_vol[3]);
 
@@ -732,13 +732,15 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		if (!pdata->buck1_set1) {
 			printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set1);
-			return -EIO;
+			ret = -EIO;
+			goto err_free_mem;
 		}
 		/* Check if SET2 is not equal to 0 */
 		if (!pdata->buck1_set2) {
 			printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set2);
-			return -EIO;
+			ret = -EIO;
+			goto err_free_mem;
 		}
 
 		gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
@@ -758,7 +760,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 
 		/* Set predefined value for BUCK1 register 2 */
 		i = 0;
@@ -770,7 +772,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 
 		/* Set predefined value for BUCK1 register 3 */
 		i = 0;
@@ -782,7 +784,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[2] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 
 		/* Set predefined value for BUCK1 register 4 */
 		i = 0;
@@ -794,7 +796,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck1_vol[3] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 
 	}
 
@@ -803,7 +805,8 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		if (!pdata->buck2_set3) {
 			printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck2_set3);
-			return -EIO;
+			ret = -EIO;
+			goto err_free_mem;
 		}
 		gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
 		gpio_direction_output(pdata->buck2_set3,
@@ -818,7 +821,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck2_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 
 		/* BUCK2 register 2 */
 		i = 0;
@@ -830,7 +833,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 		max8998->buck2_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
 		if (ret)
-			return ret;
+			goto err_free_mem;
 	}
 
 	for (i = 0; i < pdata->num_regulators; i++) {
@@ -860,6 +863,7 @@ err:
 		if (rdev[i])
 			regulator_unregister(rdev[i]);
 
+err_free_mem:
 	kfree(max8998->rdev);
 	kfree(max8998);