summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/wm831x-ldo.c
diff options
context:
space:
mode:
authorMark Brown <broonie@linaro.org>2013-07-02 23:35:22 +0100
committerMark Brown <broonie@linaro.org>2013-07-15 11:20:32 +0100
commit5ff26a14c333113967f3abe5fcb81c8e49d282c0 (patch)
tree56bbd485c1eff2e4f75f9c8b22d7d117f6c3ed4d /drivers/regulator/wm831x-ldo.c
parent6692e432a9d59b55edbfdb4ed388e03c7f17e43c (diff)
regulator: wm831x-ldo: Convert to use linear ranges
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/regulator/wm831x-ldo.c')
-rw-r--r--drivers/regulator/wm831x-ldo.c104
1 files changed, 24 insertions, 80 deletions
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 9ff883f8087..76792c7d86f 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -62,41 +62,12 @@ static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
* General purpose LDOs
*/
-#define WM831X_GP_LDO_SELECTOR_LOW 0xe
-#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
-
-static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- /* 0.9-1.6V in 50mV steps */
- if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
- return 900000 + (selector * 50000);
- /* 1.7-3.3V in 100mV steps */
- if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
- return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
- * 100000);
- return -EINVAL;
-}
-
-static int wm831x_gp_ldo_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- int volt, vsel;
-
- if (min_uV < 900000)
- vsel = 0;
- else if (min_uV < 1700000)
- vsel = ((min_uV - 900000) / 50000);
- else
- vsel = ((min_uV - 1700000) / 100000)
- + WM831X_GP_LDO_SELECTOR_LOW + 1;
-
- volt = wm831x_gp_ldo_list_voltage(rdev, vsel);
- if (volt < min_uV || volt > max_uV)
- return -EINVAL;
-
- return vsel;
-}
+static const struct regulator_linear_range wm831x_gp_ldo_ranges[] = {
+ { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 14,
+ .uV_step = 50000 },
+ { .min_uV = 1700000, .max_uV = 3300000, .min_sel = 15, .max_sel = 31,
+ .uV_step = 100000 },
+};
static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
@@ -105,7 +76,7 @@ static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
struct wm831x *wm831x = ldo->wm831x;
int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- sel = wm831x_gp_ldo_map_voltage(rdev, uV, uV);
+ sel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (sel < 0)
return sel;
@@ -230,8 +201,8 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
static struct regulator_ops wm831x_gp_ldo_ops = {
- .list_voltage = wm831x_gp_ldo_list_voltage,
- .map_voltage = wm831x_gp_ldo_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
@@ -290,7 +261,7 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
ldo->desc.id = id;
ldo->desc.type = REGULATOR_VOLTAGE;
- ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+ ldo->desc.n_voltages = 32;
ldo->desc.ops = &wm831x_gp_ldo_ops;
ldo->desc.owner = THIS_MODULE;
ldo->desc.vsel_reg = ldo->base + WM831X_LDO_ON_CONTROL;
@@ -299,6 +270,8 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
ldo->desc.enable_mask = 1 << id;
ldo->desc.bypass_reg = ldo->base;
ldo->desc.bypass_mask = WM831X_LDO1_SWI;
+ ldo->desc.linear_ranges = wm831x_gp_ldo_ranges;
+ ldo->desc.n_linear_ranges = ARRAY_SIZE(wm831x_gp_ldo_ranges);
config.dev = pdev->dev.parent;
if (pdata)
@@ -358,43 +331,12 @@ static struct platform_driver wm831x_gp_ldo_driver = {
* Analogue LDOs
*/
-
-#define WM831X_ALDO_SELECTOR_LOW 0xc
-#define WM831X_ALDO_MAX_SELECTOR 0x1f
-
-static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
- unsigned int selector)
-{
- /* 1-1.6V in 50mV steps */
- if (selector <= WM831X_ALDO_SELECTOR_LOW)
- return 1000000 + (selector * 50000);
- /* 1.7-3.5V in 100mV steps */
- if (selector <= WM831X_ALDO_MAX_SELECTOR)
- return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
- * 100000);
- return -EINVAL;
-}
-
-static int wm831x_aldo_map_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV)
-{
- int volt, vsel;
-
- if (min_uV < 1000000)
- vsel = 0;
- else if (min_uV < 1700000)
- vsel = ((min_uV - 1000000) / 50000);
- else
- vsel = ((min_uV - 1700000) / 100000)
- + WM831X_ALDO_SELECTOR_LOW + 1;
-
- volt = wm831x_aldo_list_voltage(rdev, vsel);
- if (volt < min_uV || volt > max_uV)
- return -EINVAL;
-
- return vsel;
-
-}
+static const struct regulator_linear_range wm831x_aldo_ranges[] = {
+ { .min_uV = 1000000, .max_uV = 1650000, .min_sel = 0, .max_sel = 12,
+ .uV_step = 50000 },
+ { .min_uV = 1700000, .max_uV = 3500000, .min_sel = 13, .max_sel = 31,
+ .uV_step = 100000 },
+};
static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
int uV)
@@ -403,7 +345,7 @@ static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
struct wm831x *wm831x = ldo->wm831x;
int sel, reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
- sel = wm831x_aldo_map_voltage(rdev, uV, uV);
+ sel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (sel < 0)
return sel;
@@ -486,8 +428,8 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
}
static struct regulator_ops wm831x_aldo_ops = {
- .list_voltage = wm831x_aldo_list_voltage,
- .map_voltage = wm831x_aldo_map_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
@@ -545,7 +487,9 @@ static int wm831x_aldo_probe(struct platform_device *pdev)
ldo->desc.id = id;
ldo->desc.type = REGULATOR_VOLTAGE;
- ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+ ldo->desc.n_voltages = 32;
+ ldo->desc.linear_ranges = wm831x_aldo_ranges;
+ ldo->desc.n_linear_ranges = ARRAY_SIZE(wm831x_aldo_ranges);
ldo->desc.ops = &wm831x_aldo_ops;
ldo->desc.owner = THIS_MODULE;
ldo->desc.vsel_reg = ldo->base + WM831X_LDO_ON_CONTROL;