Merge tty-next into 3.6-rc1

This handles the merge issue in:
	arch/um/drivers/line.c
	arch/um/drivers/line.h
And resolves the duplicate patches that were in both trees do to the
tty-next branch not getting merged into 3.6-rc1.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 25 insertions, 17 deletions

diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c
index 370889d0489..bf3c2f669c3 100644
--- a/drivers/rtc/rtc-ab8500.c
+++ b/drivers/rtc/rtc-ab8500.c
@@ -89,22 +89,17 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	if (retval < 0)
 		return retval;
 
-	/* Early AB8500 chips will not clear the rtc read request bit */
-	if (abx500_get_chip_id(dev) == 0) {
-		usleep_range(1000, 1000);
-	} else {
-		/* Wait for some cycles after enabling the rtc read in ab8500 */
-		while (time_before(jiffies, timeout)) {
-			retval = abx500_get_register_interruptible(dev,
-				AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
-			if (retval < 0)
-				return retval;
-
-			if (!(value & RTC_READ_REQUEST))
-				break;
-
-			usleep_range(1000, 5000);
-		}
+	/* Wait for some cycles after enabling the rtc read in ab8500 */
+	while (time_before(jiffies, timeout)) {
+		retval = abx500_get_register_interruptible(dev,
+			AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
+		if (retval < 0)
+			return retval;
+
+		if (!(value & RTC_READ_REQUEST))
+			break;
+
+		usleep_range(1000, 5000);
 	}
 
 	/* Read the Watchtime registers */
@@ -225,7 +220,8 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	int retval, i;
 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
-	unsigned long mins, secs = 0;
+	unsigned long mins, secs = 0, cursec = 0;
+	struct rtc_time curtm;
 
 	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) {
 		dev_dbg(dev, "year should be equal to or greater than %d\n",
@@ -237,6 +233,18 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	rtc_tm_to_time(&alarm->time, &secs);
 
 	/*
+	 * Check whether alarm is set less than 1min.
+	 * Since our RTC doesn't support alarm resolution less than 1min,
+	 * return -EINVAL, so UIE EMUL can take it up, incase of UIE_ON
+	 */
+	ab8500_rtc_read_time(dev, &curtm); /* Read current time */
+	rtc_tm_to_time(&curtm, &cursec);
+	if ((secs - cursec) < 59) {
+		dev_dbg(dev, "Alarm less than 1 minute not supported\r\n");
+		return -EINVAL;
+	}
+
+	/*
 	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since
 	 * we only have a small counter in the RTC.
 	 */