[SCSI] lpfc 8.3.21: Critical Errors and Bug Fixes

Critical Errors:
- Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM
- Save the irq level when locking the host_lock in lpfc_findnode_did

Bug Fixes:
- Adjust payload_length and request_length for sli4_config mailbox commands.
- Add the freed sgl/XRI to the tail of the list rather than to the head.
- Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before
  issuing a fdisc on an els retry.
- Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up
  is LPFC_INITIALIZE_LINK.
- Add support for SLI-4 Performance Hints

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 23403c65020..9fb4345ec02 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1692,7 +1692,7 @@ lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * @mbox: pointer to lpfc mbox command.
  * @subsystem: The sli4 config sub mailbox subsystem.
  * @opcode: The sli4 config sub mailbox command opcode.
- * @length: Length of the sli4 config mailbox command.
+ * @length: Length of the sli4 config mailbox command (including sub-header).
  *
  * This routine sets up the header fields of SLI4 specific mailbox command
  * for sending IOCTL command.
@@ -1723,14 +1723,14 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 	if (emb) {
 		/* Set up main header fields */
 		bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
-		sli4_config->header.cfg_mhdr.payload_length =
-					LPFC_MBX_CMD_HDR_LENGTH + length;
+		sli4_config->header.cfg_mhdr.payload_length = length;
 		/* Set up sub-header fields following main header */
 		bf_set(lpfc_mbox_hdr_opcode,
 			&sli4_config->header.cfg_shdr.request, opcode);
 		bf_set(lpfc_mbox_hdr_subsystem,
 			&sli4_config->header.cfg_shdr.request, subsystem);
-		sli4_config->header.cfg_shdr.request.request_length = length;
+		sli4_config->header.cfg_shdr.request.request_length =
+			length - LPFC_MBX_CMD_HDR_LENGTH;
 		return length;
 	}
 
@@ -1902,6 +1902,7 @@ lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
 
 	/* Set up host requested features. */
 	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+	bf_set(lpfc_mbx_rq_ftr_rq_perfh, &mboxq->u.mqe.un.req_ftrs, 1);
 
 	/* Enable DIF (block guard) only if configured to do so. */
 	if (phba->cfg_enable_bg)
@@ -2159,17 +2160,16 @@ lpfc_supported_pages(struct lpfcMboxq *mbox)
 }
 
 /**
- * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params
- *                    mailbox command.
+ * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd.
  * @mbox: pointer to lpfc mbox command to initialize.
  *
  * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
  * retrieve the particular SLI4 features supported by the port.
  **/
 void
-lpfc_sli4_params(struct lpfcMboxq *mbox)
+lpfc_pc_sli4_params(struct lpfcMboxq *mbox)
 {
-	struct lpfc_mbx_sli4_params *sli4_params;
+	struct lpfc_mbx_pc_sli4_params *sli4_params;
 
 	memset(mbox, 0, sizeof(*mbox));
 	sli4_params = &mbox->u.mqe.un.sli4_params;