nfs: disintegrate UAPI for nfs

This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently.  After these patches, userspace
headers will be segregated into:

        include/uapi/linux/.../foo.h

for the userspace interface stuff, and:

        include/linux/.../foo.h

for the strictly kernel internal stuff.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

1 files changed, 18 insertions, 8 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 9d46fcbe775..ffd85c511c8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -3,7 +3,7 @@
  * for access to MPT (Message Passing Technology) firmware.
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2010  LSI Corporation
+ * Copyright (C) 2007-2012  LSI Corporation
  *  (mailto:DL-MPTFusionLinux@lsi.com)
  *
  * This program is free software; you can redistribute it and/or
@@ -1209,6 +1209,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
 	u16 message_control;
 
 
+	/* Check whether controller SAS2008 B0 controller,
+	   if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
+	if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+	    ioc->pdev->revision == 0x01) {
+		return -EINVAL;
+	}
+
 	base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
 	if (!base) {
 		dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
@@ -1971,9 +1978,9 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
 			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 			    MPT2SAS_INTEL_RMS2LL040_BRANDING);
 			break;
-		case MPT2SAS_INTEL_RAMSDALE_SSDID:
+		case MPT2SAS_INTEL_SSD910_SSDID:
 			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
-			    MPT2SAS_INTEL_RAMSDALE_BRANDING);
+			    MPT2SAS_INTEL_SSD910_BRANDING);
 			break;
 		default:
 			break;
@@ -2424,10 +2431,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	}
 
 	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1)
-		max_request_credit = (max_queue_depth < facts->RequestCredit)
-		    ? max_queue_depth : facts->RequestCredit;
-	else
+	if (max_queue_depth != -1 && max_queue_depth != 0) {
+		max_request_credit = min_t(u16, max_queue_depth +
+			ioc->hi_priority_depth + ioc->internal_depth,
+			facts->RequestCredit);
+		if (max_request_credit > MAX_HBA_QUEUE_DEPTH)
+			max_request_credit =  MAX_HBA_QUEUE_DEPTH;
+	} else
 		max_request_credit = min_t(u16, facts->RequestCredit,
 		    MAX_HBA_QUEUE_DEPTH);
 
@@ -2502,7 +2512,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	/* set the scsi host can_queue depth
 	 * with some internal commands that could be outstanding
 	 */
-	ioc->shost->can_queue = ioc->scsiio_depth - (2);
+	ioc->shost->can_queue = ioc->scsiio_depth;
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
 	    "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));