summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/tmscsim.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/scsi/tmscsim.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/scsi/tmscsim.h')
-rw-r--r--drivers/scsi/tmscsim.h565
1 files changed, 565 insertions, 0 deletions
diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h
new file mode 100644
index 00000000000..d4495272fb4
--- /dev/null
+++ b/drivers/scsi/tmscsim.h
@@ -0,0 +1,565 @@
+/***********************************************************************
+;* File Name : TMSCSIM.H *
+;* TEKRAM DC-390(T) PCI SCSI Bus Master Host Adapter *
+;* Device Driver *
+;***********************************************************************/
+/* $Id: tmscsim.h,v 2.15.2.3 2000/11/17 20:52:27 garloff Exp $ */
+
+#ifndef _TMSCSIM_H
+#define _TMSCSIM_H
+
+#include <linux/types.h>
+#include <linux/config.h>
+
+#define SCSI_IRQ_NONE 255
+
+#define MAX_ADAPTER_NUM 4
+#define MAX_SG_LIST_BUF 16 /* Not used */
+#define MAX_SCSI_ID 8
+#define MAX_SRB_CNT 50 /* Max number of started commands */
+
+#define SEL_TIMEOUT 153 /* 250 ms selection timeout (@ 40 MHz) */
+
+#define pci_dma_lo32(a) (a & 0xffffffff)
+
+typedef u8 UCHAR; /* 8 bits */
+typedef u16 USHORT; /* 16 bits */
+typedef u32 UINT; /* 32 bits */
+typedef unsigned long ULONG; /* 32/64 bits */
+
+
+/*
+;-----------------------------------------------------------------------
+; SCSI Request Block
+;-----------------------------------------------------------------------
+*/
+struct dc390_srb
+{
+//u8 CmdBlock[12];
+
+struct dc390_srb *pNextSRB;
+struct dc390_dcb *pSRBDCB;
+struct scsi_cmnd *pcmd;
+struct scatterlist *pSegmentList;
+
+struct scatterlist Segmentx; /* make a one entry of S/G list table */
+
+unsigned long SGBusAddr; /*;a segment starting address as seen by AM53C974A*/
+unsigned long SGToBeXferLen; /*; to be xfer length */
+unsigned long TotalXferredLen;
+unsigned long SavedTotXLen;
+unsigned long Saved_Ptr;
+u32 SRBState;
+
+u8 SRBStatus;
+u8 SRBFlag; /*; b0-AutoReqSense,b6-Read,b7-write */
+ /*; b4-settimeout,b5-Residual valid */
+u8 AdaptStatus;
+u8 TargetStatus;
+
+u8 ScsiPhase;
+s8 TagNumber;
+u8 SGIndex;
+u8 SGcount;
+
+u8 MsgCnt;
+u8 EndMessage;
+u8 SavedSGCount;
+
+u8 MsgInBuf[6];
+u8 MsgOutBuf[6];
+
+//u8 IORBFlag; /*;81h-Reset, 2-retry */
+};
+
+
+/*
+;-----------------------------------------------------------------------
+; Device Control Block
+;-----------------------------------------------------------------------
+*/
+struct dc390_dcb
+{
+struct dc390_dcb *pNextDCB;
+struct dc390_acb *pDCBACB;
+
+/* Queued SRBs */
+struct dc390_srb *pGoingSRB;
+struct dc390_srb *pGoingLast;
+struct dc390_srb *pActiveSRB;
+u8 GoingSRBCnt;
+
+u32 TagMask;
+
+u8 TargetID; /*; SCSI Target ID (SCSI Only) */
+u8 TargetLUN; /*; SCSI Log. Unit (SCSI Only) */
+u8 DevMode;
+u8 DCBFlag;
+
+u8 CtrlR1;
+u8 CtrlR3;
+u8 CtrlR4;
+
+u8 SyncMode; /*; 0:async mode */
+u8 NegoPeriod; /*;for nego. */
+u8 SyncPeriod; /*;for reg. */
+u8 SyncOffset; /*;for reg. and nego.(low nibble) */
+};
+
+
+/*
+;-----------------------------------------------------------------------
+; Adapter Control Block
+;-----------------------------------------------------------------------
+*/
+struct dc390_acb
+{
+struct Scsi_Host *pScsiHost;
+u16 IOPortBase;
+u8 IRQLevel;
+u8 status;
+
+u8 SRBCount;
+u8 AdapterIndex; /*; nth Adapter this driver */
+u8 DCBCnt;
+
+u8 TagMaxNum;
+u8 ACBFlag;
+u8 Gmode2;
+u8 scan_devices;
+
+struct dc390_dcb *pLinkDCB;
+struct dc390_dcb *pLastDCB;
+struct dc390_dcb *pDCBRunRobin;
+
+struct dc390_dcb *pActiveDCB;
+struct dc390_srb *pFreeSRB;
+struct dc390_srb *pTmpSRB;
+
+u8 msgin123[4];
+u8 Connected;
+u8 pad;
+
+#if defined(USE_SPINLOCKS) && USE_SPINLOCKS > 1 && (defined(CONFIG_SMP) || DEBUG_SPINLOCKS > 0)
+spinlock_t lock;
+#endif
+u8 sel_timeout;
+u8 glitch_cfg;
+
+u8 MsgLen;
+u8 Ignore_IRQ; /* Not used */
+
+struct pci_dev *pdev;
+
+unsigned long Cmds;
+u32 SelLost;
+u32 SelConn;
+u32 CmdInQ;
+u32 CmdOutOfSRB;
+
+struct dc390_srb TmpSRB;
+struct dc390_srb SRB_array[MAX_SRB_CNT]; /* 50 SRBs */
+};
+
+
+/*;-----------------------------------------------------------------------*/
+
+
+#define BIT31 0x80000000
+#define BIT30 0x40000000
+#define BIT29 0x20000000
+#define BIT28 0x10000000
+#define BIT27 0x08000000
+#define BIT26 0x04000000
+#define BIT25 0x02000000
+#define BIT24 0x01000000
+#define BIT23 0x00800000
+#define BIT22 0x00400000
+#define BIT21 0x00200000
+#define BIT20 0x00100000
+#define BIT19 0x00080000
+#define BIT18 0x00040000
+#define BIT17 0x00020000
+#define BIT16 0x00010000
+#define BIT15 0x00008000
+#define BIT14 0x00004000
+#define BIT13 0x00002000
+#define BIT12 0x00001000
+#define BIT11 0x00000800
+#define BIT10 0x00000400
+#define BIT9 0x00000200
+#define BIT8 0x00000100
+#define BIT7 0x00000080
+#define BIT6 0x00000040
+#define BIT5 0x00000020
+#define BIT4 0x00000010
+#define BIT3 0x00000008
+#define BIT2 0x00000004
+#define BIT1 0x00000002
+#define BIT0 0x00000001
+
+/*;---UnitCtrlFlag */
+#define UNIT_ALLOCATED BIT0
+#define UNIT_INFO_CHANGED BIT1
+#define FORMATING_MEDIA BIT2
+#define UNIT_RETRY BIT3
+
+/*;---UnitFlags */
+#define DASD_SUPPORT BIT0
+#define SCSI_SUPPORT BIT1
+#define ASPI_SUPPORT BIT2
+
+/*;----SRBState machine definition */
+#define SRB_FREE 0
+#define SRB_WAIT BIT0
+#define SRB_READY BIT1
+#define SRB_MSGOUT BIT2 /*;arbitration+msg_out 1st byte*/
+#define SRB_MSGIN BIT3
+#define SRB_MSGIN_MULTI BIT4
+#define SRB_COMMAND BIT5
+#define SRB_START_ BIT6 /*;arbitration+msg_out+command_out*/
+#define SRB_DISCONNECT BIT7
+#define SRB_DATA_XFER BIT8
+#define SRB_XFERPAD BIT9
+#define SRB_STATUS BIT10
+#define SRB_COMPLETED BIT11
+#define SRB_ABORT_SENT BIT12
+#define DO_SYNC_NEGO BIT13
+#define SRB_UNEXPECT_RESEL BIT14
+
+/*;---SRBstatus */
+#define SRB_OK BIT0
+#define ABORTION BIT1
+#define OVER_RUN BIT2
+#define UNDER_RUN BIT3
+#define PARITY_ERROR BIT4
+#define SRB_ERROR BIT5
+
+/*;---ACBFlag */
+#define RESET_DEV BIT0
+#define RESET_DETECT BIT1
+#define RESET_DONE BIT2
+
+/*;---DCBFlag */
+#define ABORT_DEV_ BIT0
+
+/*;---SRBFlag */
+#define DATAOUT BIT7
+#define DATAIN BIT6
+#define RESIDUAL_VALID BIT5
+#define ENABLE_TIMER BIT4
+#define RESET_DEV0 BIT2
+#define ABORT_DEV BIT1
+#define AUTO_REQSENSE BIT0
+
+/*;---Adapter status */
+#define H_STATUS_GOOD 0
+#define H_SEL_TIMEOUT 0x11
+#define H_OVER_UNDER_RUN 0x12
+#define H_UNEXP_BUS_FREE 0x13
+#define H_TARGET_PHASE_F 0x14
+#define H_INVALID_CCB_OP 0x16
+#define H_LINK_CCB_BAD 0x17
+#define H_BAD_TARGET_DIR 0x18
+#define H_DUPLICATE_CCB 0x19
+#define H_BAD_CCB_OR_SG 0x1A
+#define H_ABORT 0x0FF
+
+/*; SCSI Status byte codes*/
+/* The values defined in include/scsi/scsi.h, to be shifted << 1 */
+
+#define SCSI_STAT_UNEXP_BUS_F 0xFD /*; Unexpect Bus Free */
+#define SCSI_STAT_BUS_RST_DETECT 0xFE /*; Scsi Bus Reset detected */
+#define SCSI_STAT_SEL_TIMEOUT 0xFF /*; Selection Time out */
+
+/* cmd->result */
+#define RES_TARGET 0x000000FF /* Target State */
+#define RES_TARGET_LNX STATUS_MASK /* Only official ... */
+#define RES_ENDMSG 0x0000FF00 /* End Message */
+#define RES_DID 0x00FF0000 /* DID_ codes */
+#define RES_DRV 0xFF000000 /* DRIVER_ codes */
+
+#define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
+#define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1)
+
+#define SET_RES_TARGET(who, tgt) do { who &= ~RES_TARGET; who |= (int)(tgt); } while (0)
+#define SET_RES_TARGET_LNX(who, tgt) do { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; } while (0)
+#define SET_RES_MSG(who, msg) do { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; } while (0)
+#define SET_RES_DID(who, did) do { who &= ~RES_DID; who |= (int)(did) << 16; } while (0)
+#define SET_RES_DRV(who, drv) do { who &= ~RES_DRV; who |= (int)(drv) << 24; } while (0)
+
+/*;---Sync_Mode */
+#define SYNC_DISABLE 0
+#define SYNC_ENABLE BIT0
+#define SYNC_NEGO_DONE BIT1
+#define WIDE_ENABLE BIT2 /* Not used ;-) */
+#define WIDE_NEGO_DONE BIT3 /* Not used ;-) */
+#define EN_TAG_QUEUEING BIT4
+#define EN_ATN_STOP BIT5
+
+#define SYNC_NEGO_OFFSET 15
+
+/*;---SCSI bus phase*/
+#define SCSI_DATA_OUT 0
+#define SCSI_DATA_IN 1
+#define SCSI_COMMAND 2
+#define SCSI_STATUS_ 3
+#define SCSI_NOP0 4
+#define SCSI_NOP1 5
+#define SCSI_MSG_OUT 6
+#define SCSI_MSG_IN 7
+
+/*;----SCSI MSG BYTE*/ /* see scsi/scsi.h */ /* One is missing ! */
+#define ABORT_TAG 0x0d
+
+/*
+ * SISC query queue
+ */
+typedef struct {
+ dma_addr_t saved_dma_handle;
+} dc390_cmd_scp_t;
+
+/*
+;==========================================================
+; EEPROM byte offset
+;==========================================================
+*/
+typedef struct _EEprom
+{
+u8 EE_MODE1;
+u8 EE_SPEED;
+u8 xx1;
+u8 xx2;
+} EEprom, *PEEprom;
+
+#define REAL_EE_ADAPT_SCSI_ID 64
+#define REAL_EE_MODE2 65
+#define REAL_EE_DELAY 66
+#define REAL_EE_TAG_CMD_NUM 67
+
+#define EE_ADAPT_SCSI_ID 32
+#define EE_MODE2 33
+#define EE_DELAY 34
+#define EE_TAG_CMD_NUM 35
+
+#define EE_LEN 40
+
+/*; EE_MODE1 bits definition*/
+#define PARITY_CHK_ BIT0
+#define SYNC_NEGO_ BIT1
+#define EN_DISCONNECT_ BIT2
+#define SEND_START_ BIT3
+#define TAG_QUEUEING_ BIT4
+
+/*; EE_MODE2 bits definition*/
+#define MORE2_DRV BIT0
+#define GREATER_1G BIT1
+#define RST_SCSI_BUS BIT2
+#define ACTIVE_NEGATION BIT3
+#define NO_SEEK BIT4
+#define LUN_CHECK BIT5
+
+#define ENABLE_CE 1
+#define DISABLE_CE 0
+#define EEPROM_READ 0x80
+
+/*
+;==========================================================
+; AMD 53C974 Registers bit Definition
+;==========================================================
+*/
+/*
+;====================
+; SCSI Register
+;====================
+*/
+
+/*; Command Reg.(+0CH) (rw) */
+#define DMA_COMMAND BIT7
+#define NOP_CMD 0
+#define CLEAR_FIFO_CMD 1
+#define RST_DEVICE_CMD 2
+#define RST_SCSI_BUS_CMD 3
+
+#define INFO_XFER_CMD 0x10
+#define INITIATOR_CMD_CMPLTE 0x11
+#define MSG_ACCEPTED_CMD 0x12
+#define XFER_PAD_BYTE 0x18
+#define SET_ATN_CMD 0x1A
+#define RESET_ATN_CMD 0x1B
+
+#define SEL_WO_ATN 0x41 /* currently not used */
+#define SEL_W_ATN 0x42
+#define SEL_W_ATN_STOP 0x43
+#define SEL_W_ATN3 0x46
+#define EN_SEL_RESEL 0x44
+#define DIS_SEL_RESEL 0x45 /* currently not used */
+#define RESEL 0x40 /* " */
+#define RESEL_ATN3 0x47 /* " */
+
+#define DATA_XFER_CMD INFO_XFER_CMD
+
+
+/*; SCSI Status Reg.(+10H) (r) */
+#define INTERRUPT BIT7
+#define ILLEGAL_OP_ERR BIT6
+#define PARITY_ERR BIT5
+#define COUNT_2_ZERO BIT4
+#define GROUP_CODE_VALID BIT3
+#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0)
+/* BIT2: MSG phase; BIT1: C/D physe; BIT0: I/O phase */
+
+/*; Interrupt Status Reg.(+14H) (r) */
+#define SCSI_RESET BIT7
+#define INVALID_CMD BIT6
+#define DISCONNECTED BIT5
+#define SERVICE_REQUEST BIT4
+#define SUCCESSFUL_OP BIT3
+#define RESELECTED BIT2
+#define SEL_ATTENTION BIT1
+#define SELECTED BIT0
+
+/*; Internal State Reg.(+18H) (r) */
+#define SYNC_OFFSET_FLAG BIT3
+#define INTRN_STATE_MASK (BIT2+BIT1+BIT0)
+/* 0x04: Sel. successful (w/o stop), 0x01: Sel. successful (w/ stop) */
+
+/*; Clock Factor Reg.(+24H) (w) */
+#define CLK_FREQ_40MHZ 0
+#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0)
+#define CLK_FREQ_30MHZ (BIT2+BIT1)
+#define CLK_FREQ_25MHZ (BIT2+BIT0)
+#define CLK_FREQ_20MHZ BIT2
+#define CLK_FREQ_15MHZ (BIT1+BIT0)
+#define CLK_FREQ_10MHZ BIT1
+
+/*; Control Reg. 1(+20H) (rw) */
+#define EXTENDED_TIMING BIT7
+#define DIS_INT_ON_SCSI_RST BIT6
+#define PARITY_ERR_REPO BIT4
+#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0) /* host adapter ID */
+
+/*; Control Reg. 2(+2CH) (rw) */
+#define EN_FEATURE BIT6
+#define EN_SCSI2_CMD BIT3
+
+/*; Control Reg. 3(+30H) (rw) */
+#define ID_MSG_CHECK BIT7
+#define EN_QTAG_MSG BIT6
+#define EN_GRP2_CMD BIT5
+#define FAST_SCSI BIT4 /* ;10MB/SEC */
+#define FAST_CLK BIT3 /* ;25 - 40 MHZ */
+
+/*; Control Reg. 4(+34H) (rw) */
+#define EATER_12NS 0
+#define EATER_25NS BIT7
+#define EATER_35NS BIT6
+#define EATER_0NS (BIT7+BIT6)
+#define REDUCED_POWER BIT5
+#define CTRL4_RESERVED BIT4 /* must be 1 acc. to AM53C974.c */
+#define NEGATE_REQACKDATA BIT2
+#define NEGATE_REQACK BIT3
+
+#define GLITCH_TO_NS(x) (((~x>>6 & 2) >> 1) | ((x>>6 & 1) << 1 ^ (x>>6 & 2)))
+#define NS_TO_GLITCH(y) (((~y<<7) | ~((y<<6) ^ ((y<<5 & 1<<6) | ~0x40))) & 0xc0)
+
+/*
+;====================
+; DMA Register
+;====================
+*/
+/*; DMA Command Reg.(+40H) (rw) */
+#define READ_DIRECTION BIT7
+#define WRITE_DIRECTION 0
+#define EN_DMA_INT BIT6
+#define EN_PAGE_INT BIT5 /* page transfer interrupt enable */
+#define MAP_TO_MDL BIT4
+#define DIAGNOSTIC BIT2
+#define DMA_IDLE_CMD 0
+#define DMA_BLAST_CMD BIT0
+#define DMA_ABORT_CMD BIT1
+#define DMA_START_CMD (BIT1+BIT0)
+
+/*; DMA Status Reg.(+54H) (r) */
+#define PCI_MS_ABORT BIT6
+#define BLAST_COMPLETE BIT5
+#define SCSI_INTERRUPT BIT4
+#define DMA_XFER_DONE BIT3
+#define DMA_XFER_ABORT BIT2
+#define DMA_XFER_ERROR BIT1
+#define POWER_DOWN BIT0
+
+/*; DMA SCSI Bus and Ctrl.(+70H) */
+#define EN_INT_ON_PCI_ABORT BIT25
+#define WRT_ERASE_DMA_STAT BIT24
+#define PW_DOWN_CTRL BIT21
+#define SCSI_BUSY BIT20
+#define SCLK BIT19
+#define SCAM BIT18
+#define SCSI_LINES 0x0003ffff
+
+/*
+;==========================================================
+; SCSI Chip register address offset
+;==========================================================
+;Registers are rw unless declared otherwise
+*/
+#define CtcReg_Low 0x00 /* r curr. transfer count */
+#define CtcReg_Mid 0x04 /* r */
+#define CtcReg_High 0x38 /* r */
+#define ScsiFifo 0x08
+#define ScsiCmd 0x0C
+#define Scsi_Status 0x10 /* r */
+#define INT_Status 0x14 /* r */
+#define Sync_Period 0x18 /* w */
+#define Sync_Offset 0x1C /* w */
+#define Clk_Factor 0x24 /* w */
+#define CtrlReg1 0x20
+#define CtrlReg2 0x2C
+#define CtrlReg3 0x30
+#define CtrlReg4 0x34
+#define DMA_Cmd 0x40
+#define DMA_XferCnt 0x44 /* rw starting transfer count (32 bit) */
+#define DMA_XferAddr 0x48 /* rw starting physical address (32 bit) */
+#define DMA_Wk_ByteCntr 0x4C /* r working byte counter */
+#define DMA_Wk_AddrCntr 0x50 /* r working address counter */
+#define DMA_Status 0x54 /* r */
+#define DMA_MDL_Addr 0x58 /* rw starting MDL address */
+#define DMA_Wk_MDL_Cntr 0x5C /* r working MDL counter */
+#define DMA_ScsiBusCtrl 0x70 /* rw SCSI Bus, PCI/DMA Ctrl */
+
+#define StcReg_Low CtcReg_Low /* w start transfer count */
+#define StcReg_Mid CtcReg_Mid /* w */
+#define StcReg_High CtcReg_High /* w */
+#define Scsi_Dest_ID Scsi_Status /* w */
+#define Scsi_TimeOut INT_Status /* w */
+#define Intern_State Sync_Period /* r */
+#define Current_Fifo Sync_Offset /* r Curr. FIFO / int. state */
+
+
+#define DC390_read8(address) \
+ (inb (pACB->IOPortBase + (address)))
+
+#define DC390_read8_(address, base) \
+ (inb ((u16)(base) + (address)))
+
+#define DC390_read16(address) \
+ (inw (pACB->IOPortBase + (address)))
+
+#define DC390_read32(address) \
+ (inl (pACB->IOPortBase + (address)))
+
+#define DC390_write8(address,value) \
+ outb ((value), pACB->IOPortBase + (address))
+
+#define DC390_write8_(address,value,base) \
+ outb ((value), (u16)(base) + (address))
+
+#define DC390_write16(address,value) \
+ outw ((value), pACB->IOPortBase + (address))
+
+#define DC390_write32(address,value) \
+ outl ((value), pACB->IOPortBase + (address))
+
+
+#endif /* _TMSCSIM_H */