cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code

Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so
we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 0 insertions, 277 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index e53524c6463..b8db4d3eed3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -41,9 +41,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/fs_pd.h>
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 #include <asm/prom.h>
-#endif
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -52,7 +50,6 @@
 
 /**************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
@@ -106,172 +103,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
 		iounmap(pram);
 }
 
-#else
-void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
-{
-	ulong val;
-	int line = port - cpm_uart_ports;
-	volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
-
-
-	switch (line) {
-	case UART_SMC1:
-		val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SMC2:
-		val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC1:
-		val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC2:
-		val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC3:
-		val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC4:
-		val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
-				cmd) | CPM_CR_FLG;
-		break;
-	default:
-		return;
-
-	}
-	cp->cp_cpcr = val;
-	while (cp->cp_cpcr & CPM_CR_FLG) ;
-
-	cpm2_unmap(cp);
-}
-
-void smc1_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* SMC1 is only on port D */
-	io->iop_ppard |= 0x00c00000;
-	io->iop_pdird |= 0x00400000;
-	io->iop_pdird &= ~0x00800000;
-	io->iop_psord &= ~0x00c00000;
-
-	/* Wire BRG1 to SMC1 */
-	cpmux->cmx_smr &= 0x0f;
-	pinfo->brg = 1;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void smc2_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* SMC2 is only on port A */
-	io->iop_ppara |= 0x00c00000;
-	io->iop_pdira |= 0x00400000;
-	io->iop_pdira &= ~0x00800000;
-	io->iop_psora &= ~0x00c00000;
-
-	/* Wire BRG2 to SMC2 */
-	cpmux->cmx_smr &= 0xf0;
-	pinfo->brg = 2;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc1_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	/* Use Port D for SCC1 instead of other functions.  */
-	io->iop_ppard |= 0x00000003;
-	io->iop_psord &= ~0x00000001;	/* Rx */
-	io->iop_psord |= 0x00000002;	/* Tx */
-	io->iop_pdird &= ~0x00000001;	/* Rx */
-	io->iop_pdird |= 0x00000002;	/* Tx */
-
-	/* Wire BRG1 to SCC1 */
-	cpmux->cmx_scr &= 0x00ffffff;
-	cpmux->cmx_scr |= 0x00000000;
-	pinfo->brg = 1;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc2_lineif(struct uart_cpm_port *pinfo)
-{
-	/*
-	 * STx GP3 uses the SCC2 secondary option pin assignment
-	 * which this driver doesn't account for in the static
-	 * pin assignments. This kind of board specific info
-	 * really has to get out of the driver so boards can
-	 * be supported in a sane fashion.
-	 */
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-#ifndef CONFIG_STX_GP3
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-
-	io->iop_pparb |= 0x008b0000;
-	io->iop_pdirb |= 0x00880000;
-	io->iop_psorb |= 0x00880000;
-	io->iop_pdirb &= ~0x00030000;
-	io->iop_psorb &= ~0x00030000;
-#endif
-	cpmux->cmx_scr &= 0xff00ffff;
-	cpmux->cmx_scr |= 0x00090000;
-	pinfo->brg = 2;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc3_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	io->iop_pparb |= 0x008b0000;
-	io->iop_pdirb |= 0x00880000;
-	io->iop_psorb |= 0x00880000;
-	io->iop_pdirb &= ~0x00030000;
-	io->iop_psorb &= ~0x00030000;
-	cpmux->cmx_scr &= 0xffff00ff;
-	cpmux->cmx_scr |= 0x00001200;
-	pinfo->brg = 3;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-
-void scc4_lineif(struct uart_cpm_port *pinfo)
-{
-	volatile iop_cpm2_t *io = cpm2_map(im_ioport);
-	volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
-
-	io->iop_ppard |= 0x00000600;
-	io->iop_psord &= ~0x00000600;	/* Tx/Rx */
-	io->iop_pdird &= ~0x00000200;	/* Rx */
-	io->iop_pdird |= 0x00000400;	/* Tx */
-
-	cpmux->cmx_scr &= 0xffffff00;
-	cpmux->cmx_scr |= 0x0000001b;
-	pinfo->brg = 4;
-
-	cpm2_unmap(cpmux);
-	cpm2_unmap(io);
-}
-#endif
-
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
@@ -340,111 +171,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 
 	cpm_dpfree(pinfo->dp_addr);
 }
-
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
-	u16 *addr;
-#endif
-	pr_debug("CPM uart[-]:init portdesc\n");
-
-	cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
-	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SMC1].smcp;
-
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
-	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
-	*addr = PROFF_SMC1;
-	cpm2_unmap(addr);
-
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
-	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SMC2].smcp;
-
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
-	addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
-	*addr = PROFF_SMC2;
-	cpm2_unmap(addr);
-
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
-	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC1].sccp;
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
-	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC2].sccp;
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
-	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC3].sccp;
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
-	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)cpm_uart_ports[UART_SCC4].sccp;
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
-
-	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-
-	return 0;
-}
-#endif