Merge branch 'linus' into x86/mce3

Conflicts:
	arch/x86/kernel/cpu/mcheck/mce_64.c
	arch/x86/kernel/irq.c

Merge reason: Resolve the conflicts above.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

14 files changed, 1202 insertions, 297 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a0127e93ade..fb867a9f55e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -287,6 +287,13 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_AR7] = {
+		.name		= "AR7",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 938bc1b6c3f..e371a9c1534 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_2_1130000 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+		PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+		pbn_b0_1_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 343e3a35b6a..641e800ed69 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -833,6 +833,7 @@ config SERIAL_IMX
 	bool "IMX serial port support"
 	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
+	select RATIONAL
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
@@ -1433,4 +1434,11 @@ config SPORT_BAUD_RATE
 	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
 	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
 
+config SERIAL_TIMBERDALE
+	tristate "Support for timberdale UART"
+	depends on MFD_TIMBERDALE
+	select SERIAL_CORE
+	---help---
+	Add support for UART controller on timberdale.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d438eb2a73d..45a8658f54d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d86123e0339..e2f6b1bfac9 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		/* Clear TFI bit */
 		UART_PUT_LSR(uart, TFI);
 #endif
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		return;
 	}
@@ -415,6 +420,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 	set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
 	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
 	set_dma_x_modify(uart->tx_dma_channel, 1);
+	SSYNC();
 	enable_dma(uart->tx_dma_channel);
 
 	UART_SET_IER(uart, ETBEI);
@@ -473,27 +479,41 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
-	unsigned long flags;
-
-	spin_lock_irqsave(&uart->port.lock, flags);
 
+	dma_disable_irq(uart->rx_dma_channel);
+	spin_lock_bh(&uart->port.lock);
+
+	/* 2D DMA RX buffer ring is used. Because curr_y_count and
+	 * curr_x_count can't be read as an atomic operation,
+	 * curr_y_count should be read before curr_x_count. When
+	 * curr_x_count is read, curr_y_count may already indicate
+	 * next buffer line. But, the position calculated here is
+	 * still indicate the old line. The wrong position data may
+	 * be smaller than current buffer tail, which cause garbages
+	 * are received if it is not prohibit.
+	 */
 	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
 	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
 	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
-	if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
 		uart->rx_dma_nrows = 0;
 	x_pos = DMA_RX_XCOUNT - x_pos;
 	if (x_pos == DMA_RX_XCOUNT)
 		x_pos = 0;
 
 	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-	if (pos != uart->rx_dma_buf.tail) {
+	/* Ignore receiving data if new position is in the same line of
+	 * current buffer tail and small.
+	 */
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
 		uart->rx_dma_buf.head = pos;
 		bfin_serial_dma_rx_chars(uart);
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_irqrestore(&uart->port.lock, flags);
+	spin_unlock_bh(&uart->port.lock);
+	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
 }
@@ -514,6 +534,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
 		disable_dma(uart->tx_dma_channel);
 		clear_dma_irqstat(uart->tx_dma_channel);
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx += uart->tx_count;
@@ -532,11 +557,26 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 	unsigned short irqstat;
+	int x_pos, pos;
 
 	spin_lock(&uart->port.lock);
 	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
 	clear_dma_irqstat(uart->rx_dma_channel);
-	bfin_serial_dma_rx_chars(uart);
+
+	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
+		uart->rx_dma_nrows = 0;
+
+	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
+		uart->rx_dma_buf.head = pos;
+		bfin_serial_dma_rx_chars(uart);
+		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
+	}
+
 	spin_unlock(&uart->port.lock);
 
 	return IRQ_HANDLED;
@@ -789,8 +829,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 			__func__);
 	}
 
-	if (termios->c_cflag & CSTOPB)
-		lcr |= STB;
+	/* Anomaly notes:
+	 *  05000231 -  STOP bit is always set to 1 whatever the user is set.
+	 */
+	if (termios->c_cflag & CSTOPB) {
+		if (ANOMALY_05000231)
+			printk(KERN_WARNING "STOP bits other than 1 is not "
+				"supported in case of anomaly 05000231.\n");
+		else
+			lcr |= STB;
+	}
 	if (termios->c_cflag & PARENB)
 		lcr |= PEN;
 	if (!(termios->c_cflag & PARODD))
@@ -940,6 +988,10 @@ static void bfin_serial_reset_irda(struct uart_port *port)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
+/* Anomaly notes:
+ *  05000099 -  Because we only use THRE in poll_put and DR in poll_get,
+ *		losing other bits of UART_LSR is not a problem here.
+ */
 static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -1245,12 +1297,17 @@ static __init void early_serial_write(struct console *con, const char *s,
 	}
 }
 
+/*
+ * This should have a .setup or .early_setup in it, but then things get called
+ * without the command line options, and the baud rate gets messed up - so
+ * don't let the common infrastructure play with things. (see calls to setup
+ * & earlysetup in ./kernel/printk.c:register_console()
+ */
 static struct __initdata console bfin_early_serial_console = {
 	.name = "early_BFuart",
 	.write = early_serial_write,
 	.device = uart_console_device,
 	.flags = CON_PRINTBUFFER,
-	.setup = bfin_serial_console_setup,
 	.index = -1,
 	.data  = &bfin_serial_reg,
 };
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 529c0ff7952..34b4ae0fe76 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 {
 	pr_debug("%s value:%x\n", __func__, value);
 	/* Place a Start and Stop bit */
-	__asm__ volatile (
-		"R2 = b#01111111100;\n\t"
-		"R3 = b#10000000001;\n\t"
-		"%0 <<= 2;\n\t"
-		"%0 = %0 & R2;\n\t"
-		"%0 = %0 | R3;\n\t"
-		:"=r"(value)
-		:"0"(value)
-		:"R2", "R3");
+	__asm__ __volatile__ (
+		"R2 = b#01111111100;"
+		"R3 = b#10000000001;"
+		"%0 <<= 2;"
+		"%0 = %0 & R2;"
+		"%0 = %0 | R3;"
+		: "=d"(value)
+		: "d"(value)
+		: "ASTAT", "R2", "R3"
+	);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	SPORT_PUT_TX(up, value);
@@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 {
 	unsigned int value, extract;
+	u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
 
 	value = SPORT_GET_RX32(up);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	/* Extract 8 bits data */
-	__asm__ volatile (
-		"R5 = 0;\n\t"
-		"P0 = 8;\n\t"
-		"R1 = 0x1801(Z);\n\t"
-		"R3 = 0x0300(Z);\n\t"
-		"R4 = 0;\n\t"
-		"LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
-		"R2 = extract(%1, R1.L)(Z);\n\t"
-		"R2 <<= R4;\n\t"
-		"R5 = R5 | R2;\n\t"
-		"R1 = R1 - R3;\nloop_e:\t"
-		"R4 += 1;\n\t"
-		"%0 = R5;\n\t"
-		:"=r"(extract)
-		:"r"(value)
-		:"P0", "R1", "R2","R3","R4", "R5");
+	__asm__ __volatile__ (
+		"%[extr] = 0;"
+		"%[mask1] = 0x1801(Z);"
+		"%[mask2] = 0x0300(Z);"
+		"%[shift] = 0;"
+		"LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
+		".Lloop_s:"
+		"%[tmp] = extract(%[val], %[mask1].L)(Z);"
+		"%[tmp] <<= %[shift];"
+		"%[extr] = %[extr] | %[tmp];"
+		"%[mask1] = %[mask1] - %[mask2];"
+		".Lloop_e:"
+		"%[shift] += 1;"
+		: [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
+		  [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
+		: "d"(value), [lc]"a"(8)
+		: "ASTAT", "LB0", "LC0", "LT0"
+	);
 
 	pr_debug("	extract:%x\n", extract);
 	return extract;
@@ -149,7 +153,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
 	int tclkdiv, tfsdiv, rclkdiv;
 
 	/* Set TCR1 and TCR2 */
-	SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+	SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
 	SPORT_PUT_TCR2(up, 10);
 	pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
@@ -419,7 +423,7 @@ static void sport_shutdown(struct uart_port *port)
 }
 
 static void sport_set_termios(struct uart_port *port,
-		struct termios *termios, struct termios *old)
+		struct ktermios *termios, struct ktermios *old)
 {
 	pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
 	uart_update_timeout(port, CS8 ,port->uartclk);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index a461b3b2c72..9f2891c2c4a 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head);
 static spinlock_t icom_lock;
 
 #ifdef ICOM_TRACE
-static inline void trace(struct icom_port *, char *, unsigned long) {};
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+			unsigned long trace_data)
+{
+	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+	icom_port->port, trace_pt, trace_data);
+}
 #else
 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
 #endif
@@ -408,7 +413,7 @@ static void load_code(struct icom_port *icom_port)
 	release_firmware(fw);
 
 	/* Set Hardware level */
-	if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+	if (icom_port->adapter->version == ADAPTER_V2)
 		writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
 
 	/* Start the processor in Adapter */
@@ -861,7 +866,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id)
 	/* find icom_port for this interrupt */
 	icom_adapter = (struct icom_adapter *) dev_id;
 
-	if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+	if (icom_adapter->version == ADAPTER_V2) {
 		int_reg = icom_adapter->base_addr + 0x8024;
 
 		adapter_interrupts = readl(int_reg);
@@ -1647,15 +1652,6 @@ static void __exit icom_exit(void)
 module_init(icom_init);
 module_exit(icom_exit);
 
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
-		  unsigned long trace_data)
-{
-	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
-		 icom_port->port, trace_pt, trace_data);
-}
-#endif
-
 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
 MODULE_SUPPORTED_DEVICE
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c5..7b5d1de9cfe 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -8,6 +8,9 @@
  *  Author: Sascha Hauer <sascha@saschahauer.de>
  *  Copyright (C) 2004 Pengutronix
  *
+ *  Copyright (C) 2009 emlix GmbH
+ *  Author: Fabian Godehardt (added IrDA support for iMX)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,8 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -148,6 +153,7 @@
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
 #define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
 #define  USR1_RTSS  	 (1<<14) /* RTS pin status */
@@ -211,10 +217,20 @@ struct imx_port {
 	struct timer_list	timer;
 	unsigned int		old_status;
 	int			txirq,rxirq,rtsirq;
-	int			have_rtscts:1;
+	unsigned int		have_rtscts:1;
+	unsigned int		use_irda:1;
+	unsigned int		irda_inv_rx:1;
+	unsigned int		irda_inv_tx:1;
+	unsigned short		trcv_delay; /* transceiver delay */
 	struct clk		*clk;
 };
 
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport)	((sport)->use_irda)
+#else
+#define USE_IRDA(sport)	(0)
+#endif
+
 /*
  * Handle any change of modem status signal since we were last called.
  */
@@ -268,6 +284,48 @@ static void imx_stop_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex - wait for end of transmission */
+		int n = 256;
+		while ((--n > 0) &&
+		      !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+			udelay(5);
+			barrier();
+		}
+		/*
+		 * irda transceiver - wait a bit more to avoid
+		 * cutoff, hardware dependent
+		 */
+		udelay(sport->trcv_delay);
+
+		/*
+		 * half duplex - reactivate receive mode,
+		 * flush receive pipe echo crap
+		 */
+		if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+			temp = readl(sport->port.membase + UCR1);
+			temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp &= ~(UCR4_TCEN);
+			writel(temp, sport->port.membase + UCR4);
+
+			while (readl(sport->port.membase + URXD0) &
+			       URXD_CHARRDY)
+				barrier();
+
+			temp = readl(sport->port.membase + UCR1);
+			temp |= UCR1_RRDYEN;
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp |= UCR4_DREN;
+			writel(temp, sport->port.membase + UCR4);
+		}
+		return;
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
 }
@@ -302,13 +360,15 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
 		/* send xmit->buf[xmit->tail]
 		 * out the port here */
 		writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
-		xmit->tail = (xmit->tail + 1) &
-		         (UART_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		sport->port.icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
 	}
 
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
 	if (uart_circ_empty(xmit))
 		imx_stop_tx(&sport->port);
 }
@@ -321,9 +381,30 @@ static void imx_start_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex in IrDA mode; have to disable receive mode */
+		temp = readl(sport->port.membase + UCR4);
+		temp &= ~(UCR4_DREN);
+		writel(temp, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR1);
+		temp &= ~(UCR1_RRDYEN);
+		writel(temp, sport->port.membase + UCR1);
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR1);
+		temp |= UCR1_TRDYEN;
+		writel(temp, sport->port.membase + UCR1);
+
+		temp = readl(sport->port.membase + UCR4);
+		temp |= UCR4_TCEN;
+		writel(temp, sport->port.membase + UCR4);
+	}
+
 	if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
 		imx_transmit_buffer(sport);
 }
@@ -395,8 +476,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 				continue;
 		}
 
-		if (uart_handle_sysrq_char
-		            (&sport->port, (unsigned char)rx))
+		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
 			continue;
 
 		if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
@@ -471,26 +551,26 @@ static unsigned int imx_tx_empty(struct uart_port *port)
  */
 static unsigned int imx_get_mctrl(struct uart_port *port)
 {
-        struct imx_port *sport = (struct imx_port *)port;
-        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+	struct imx_port *sport = (struct imx_port *)port;
+	unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
 
-        if (readl(sport->port.membase + USR1) & USR1_RTSS)
-                tmp |= TIOCM_CTS;
+	if (readl(sport->port.membase + USR1) & USR1_RTSS)
+		tmp |= TIOCM_CTS;
 
-        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
-                tmp |= TIOCM_RTS;
+	if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+		tmp |= TIOCM_RTS;
 
-        return tmp;
+	return tmp;
 }
 
 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        struct imx_port *sport = (struct imx_port *)port;
+	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
 	temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
 
-        if (mctrl & TIOCM_RTS)
+	if (mctrl & TIOCM_RTS)
 		temp |= UCR2_CTS;
 
 	writel(temp, sport->port.membase + UCR2);
@@ -534,12 +614,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	if(!ufcr_rfdiv)
 		ufcr_rfdiv = 1;
 
-	if(ufcr_rfdiv >= 7)
-		ufcr_rfdiv = 6;
-	else
-		ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-	val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
 	writel(val, sport->port.membase + UFCR);
 
@@ -558,8 +633,24 @@ static int imx_startup(struct uart_port *port)
 	 * requesting IRQs
 	 */
 	temp = readl(sport->port.membase + UCR4);
+
+	if (USE_IRDA(sport))
+		temp |= UCR4_IRSC;
+
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+	if (USE_IRDA(sport)) {
+		/* reset fifo's and state machines */
+		int i = 100;
+		temp = readl(sport->port.membase + UCR2);
+		temp &= ~UCR2_SRST;
+		writel(temp, sport->port.membase + UCR2);
+		while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+		    (--i > 0)) {
+			udelay(1);
+		}
+	}
+
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
 	 * chips only have one interrupt.
@@ -575,12 +666,16 @@ static int imx_startup(struct uart_port *port)
 		if (retval)
 			goto error_out2;
 
-		retval = request_irq(sport->rtsirq, imx_rtsint,
-			     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				DRIVER_NAME, sport);
-		if (retval)
-			goto error_out3;
+		/* do not use RTS IRQ on IrDA */
+		if (!USE_IRDA(sport)) {
+			retval = request_irq(sport->rtsirq, imx_rtsint,
+				     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+				       IRQF_TRIGGER_FALLING |
+				       IRQF_TRIGGER_RISING,
+					DRIVER_NAME, sport);
+			if (retval)
+				goto error_out3;
+		}
 	} else {
 		retval = request_irq(sport->port.irq, imx_int, 0,
 				DRIVER_NAME, sport);
@@ -597,18 +692,49 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+	if (USE_IRDA(sport)) {
+		temp |= UCR1_IREN;
+		temp &= ~(UCR1_RTSDEN);
+	}
+
 	writel(temp, sport->port.membase + UCR1);
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+	if (USE_IRDA(sport)) {
+		/* clear RX-FIFO */
+		int i = 64;
+		while ((--i > 0) &&
+			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+			barrier();
+		}
+	}
+
 #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
 	temp = readl(sport->port.membase + UCR3);
 	temp |= UCR3_RXDMUXSEL;
 	writel(temp, sport->port.membase + UCR3);
 #endif
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR4);
+		if (sport->irda_inv_rx)
+			temp |= UCR4_INVR;
+		else
+			temp &= ~(UCR4_INVR);
+		writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR3);
+		if (sport->irda_inv_tx)
+			temp |= UCR3_INVT;
+		else
+			temp &= ~(UCR3_INVT);
+		writel(temp, sport->port.membase + UCR3);
+	}
+
 	/*
 	 * Enable modem status interrupts
 	 */
@@ -616,6 +742,16 @@ static int imx_startup(struct uart_port *port)
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		sport->irda_inv_rx = pdata->irda_inv_rx;
+		sport->irda_inv_tx = pdata->irda_inv_tx;
+		sport->trcv_delay = pdata->transceiver_delay;
+		if (pdata->irda_enable)
+			pdata->irda_enable(1);
+	}
+
 	return 0;
 
 error_out3:
@@ -633,6 +769,17 @@ static void imx_shutdown(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~(UCR2_TXEN);
+	writel(temp, sport->port.membase + UCR2);
+
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		if (pdata->irda_enable)
+			pdata->irda_enable(0);
+	}
+
 	/*
 	 * Stop our timer.
 	 */
@@ -642,7 +789,8 @@ static void imx_shutdown(struct uart_port *port)
 	 * Free the interrupts
 	 */
 	if (sport->txirq > 0) {
-		free_irq(sport->rtsirq, sport);
+		if (!USE_IRDA(sport))
+			free_irq(sport->rtsirq, sport);
 		free_irq(sport->txirq, sport);
 		free_irq(sport->rxirq, sport);
 	} else
@@ -654,6 +802,9 @@ static void imx_shutdown(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+	if (USE_IRDA(sport))
+		temp &= ~(UCR1_IREN);
+
 	writel(temp, sport->port.membase + UCR1);
 }
 
@@ -665,7 +816,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-	unsigned int div, num, denom, ufcr;
+	unsigned int div, ufcr;
+	unsigned long num, denom;
+	uint64_t tdiv64;
 
 	/*
 	 * If we don't support modem control lines, don't allow
@@ -761,38 +914,39 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.membase + UCR2);
 	old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-	div = sport->port.uartclk / (baud * 16);
-	if (div > 7)
-		div = 7;
-	if (!div)
+	if (USE_IRDA(sport)) {
+		/*
+		 * use maximum available submodule frequency to
+		 * avoid missing short pulses due to low sampling rate
+		 */
 		div = 1;
-
-	num = baud;
-	denom = port->uartclk / div / 16;
-
-	/* shift num and denom right until they fit into 16 bits */
-	while (num > 0x10000 || denom > 0x10000) {
-		num >>= 1;
-		denom >>= 1;
+	} else {
+		div = sport->port.uartclk / (baud * 16);
+		if (div > 7)
+			div = 7;
+		if (!div)
+			div = 1;
 	}
-	if (num > 0)
-		num -= 1;
-	if (denom > 0)
-		denom -= 1;
 
-	writel(num, sport->port.membase + UBIR);
-	writel(denom, sport->port.membase + UBMR);
+	rational_best_approximation(16 * div * baud, sport->port.uartclk,
+		1 << 16, 1 << 16, &num, &denom);
 
-	if (div == 7)
-		div = 6; /* 6 in RFDIV means divide by 7 */
-	else
-		div = 6 - div;
+	tdiv64 = sport->port.uartclk;
+	tdiv64 *= num;
+	do_div(tdiv64, denom * 16 * div);
+	tty_encode_baud_rate(sport->port.info->port.tty,
+		(speed_t)tdiv64, (speed_t)tdiv64);
+
+	num -= 1;
+	denom -= 1;
 
 	ufcr = readl(sport->port.membase + UFCR);
-	ufcr = (ufcr & (~UFCR_RFDIV)) |
-	    (div << 7);
+	ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
 	writel(ufcr, sport->port.membase + UFCR);
 
+	writel(num, sport->port.membase + UBIR);
+	writel(denom, sport->port.membase + UBMR);
+
 #ifdef ONEMS
 	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
 #endif
@@ -1031,6 +1185,8 @@ imx_console_setup(struct console *co, char *options)
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
 	sport = imx_ports[co->index];
+	if(sport == NULL)
+		return -ENODEV;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1070,22 +1226,22 @@ static struct uart_driver imx_reg = {
 
 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_suspend_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_suspend_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_resume(struct platform_device *dev)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_resume_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_resume_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_probe(struct platform_device *pdev)
@@ -1141,19 +1297,29 @@ static int serial_imx_probe(struct platform_device *pdev)
 	imx_ports[pdev->id] = sport;
 
 	pdata = pdev->dev.platform_data;
-	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+	if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
+#ifdef CONFIG_IRDA
+	if (pdata && (pdata->flags & IMXUART_IRDA))
+		sport->use_irda = 1;
+#endif
+
 	if (pdata->init) {
 		ret = pdata->init(pdev);
 		if (ret)
 			goto clkput;
 	}
 
-	uart_add_one_port(&imx_reg, &sport->port);
+	ret = uart_add_one_port(&imx_reg, &sport->port);
+	if (ret)
+		goto deinit;
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+deinit:
+	if (pdata->exit)
+		pdata->exit(pdev);
 clkput:
 	clk_put(sport->clk);
 	clk_disable(sport->clk);
@@ -1191,13 +1357,13 @@ static int serial_imx_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver serial_imx_driver = {
-        .probe          = serial_imx_probe,
-        .remove         = serial_imx_remove,
+	.probe		= serial_imx_probe,
+	.remove		= serial_imx_remove,
 
 	.suspend	= serial_imx_suspend,
 	.resume		= serial_imx_resume,
 	.driver		= {
-	        .name	= "imx-uart",
+		.name	= "imx-uart",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index c0a3e2734e2..4e5f3bde046 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -61,6 +61,7 @@ enum {
 	if ((DBG_##nlevel & jsm_debug))			\
 	dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
 
+#define	MAXLINES	256
 #define MAXPORTS	8
 #define MAX_STOPS_SENT	5
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 31496dc0a0d..107ce2e187b 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -33,6 +33,8 @@
 
 #include "jsm.h"
 
+static DECLARE_BITMAP(linemap, MAXLINES);
+
 static void jsm_carrier(struct jsm_channel *ch);
 
 static inline int jsm_get_mstat(struct jsm_channel *ch)
@@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 int __devinit jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i;
+	unsigned int line;
 	struct jsm_channel *ch;
 
 	if (!brd)
@@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 		brd->channels[i]->uart_port.membase = brd->re_map_membase;
 		brd->channels[i]->uart_port.fifosize = 16;
 		brd->channels[i]->uart_port.ops = &jsm_ops;
-		brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+		line = find_first_zero_bit(linemap, MAXLINES);
+		if (line >= MAXLINES) {
+			printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+			continue;
+		} else
+			set_bit((int)line, linemap);
+		brd->channels[i]->uart_port.line = line;
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
-			printk(KERN_INFO "Added device failed\n");
+			printk(KERN_INFO "jsm: add device failed\n");
 		else
 			printk(KERN_INFO "Added device \n");
 	}
@@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 
 		ch = brd->channels[i];
 
+		clear_bit((int)(ch->uart_port.line), linemap);
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index dbf5357a77b..a4cf1079b31 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -47,12 +47,17 @@
 #include <linux/clk.h>
 #include <linux/ctype.h>
 #include <linux/err.h>
+#include <linux/list.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #endif
 
+#ifdef CONFIG_H8300
+#include <asm/gpio.h>
+#endif
+
 #include "sh-sci.h"
 
 struct sci_port {
@@ -75,14 +80,22 @@ struct sci_port {
 	int			break_flag;
 
 #ifdef CONFIG_HAVE_CLK
-	/* Port clock */
-	struct clk		*clk;
+	/* Interface clock */
+	struct clk		*iclk;
+	/* Data clock */
+	struct clk		*dclk;
 #endif
+	struct list_head	node;
 };
 
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
+struct sh_sci_priv {
+	spinlock_t lock;
+	struct list_head ports;
+
+#ifdef CONFIG_HAVE_CLK
+	struct notifier_block clk_nb;
 #endif
+};
 
 /* Function prototypes */
 static void sci_stop_tx(struct uart_port *port);
@@ -138,9 +151,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TDxE(port)));
 
-	sci_in(port, SCxSR);            /* Dummy read */
-	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 	sci_out(port, SCxTDR, c);
+	sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -159,12 +171,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 		*mstpcrl &= ~mask;
 }
 
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_enable);
 }
 
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_disable);
 }
@@ -611,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
 	struct tty_struct *tty = port->info->port.tty;
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (uart_handle_break(port))
 		return 0;
@@ -726,19 +738,43 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 static int sci_notifier(struct notifier_block *self,
 			unsigned long phase, void *p)
 {
-	int i;
+	struct sh_sci_priv *priv = container_of(self,
+						struct sh_sci_priv, clk_nb);
+	struct sci_port *sci_port;
+	unsigned long flags;
 
 	if ((phase == CPUFREQ_POSTCHANGE) ||
-	    (phase == CPUFREQ_RESUMECHANGE))
-		for (i = 0; i < SCI_NPORTS; i++) {
-			struct sci_port *s = &sci_ports[i];
-			s->port.uartclk = clk_get_rate(s->clk);
-		}
+	    (phase == CPUFREQ_RESUMECHANGE)) {
+		spin_lock_irqsave(&priv->lock, flags);
+		list_for_each_entry(sci_port, &priv->ports, node)
+			sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
 
 	return NOTIFY_OK;
 }
 
-static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+static void sci_clk_enable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	clk_enable(sci_port->dclk);
+	sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+	if (sci_port->iclk)
+		clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	if (sci_port->iclk)
+		clk_disable(sci_port->iclk);
+
+	clk_disable(sci_port->dclk);
+}
 #endif
 
 static int sci_request_irq(struct sci_port *port)
@@ -865,15 +901,11 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 
 static int sci_startup(struct uart_port *port)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (s->enable)
 		s->enable(port);
 
-#ifdef CONFIG_HAVE_CLK
-	s->clk = clk_get(NULL, "module_clk");
-#endif
-
 	sci_request_irq(s);
 	sci_start_tx(port);
 	sci_start_rx(port, 1);
@@ -883,7 +915,7 @@ static int sci_startup(struct uart_port *port)
 
 static void sci_shutdown(struct uart_port *port)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	sci_stop_rx(port);
 	sci_stop_tx(port);
@@ -891,11 +923,6 @@ static void sci_shutdown(struct uart_port *port)
 
 	if (s->disable)
 		s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
-	clk_put(s->clk);
-	s->clk = NULL;
-#endif
 }
 
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -980,25 +1007,31 @@ static int sci_request_port(struct uart_port *port)
 
 static void sci_config_port(struct uart_port *port, int flags)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	port->type = s->type;
 
-	if (port->flags & UPF_IOREMAP && !port->membase) {
-#if defined(CONFIG_SUPERH64)
-		port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
-		port->membase = (void __iomem *)port->mapbase;
-#else
+	if (port->membase)
+		return;
+
+	if (port->flags & UPF_IOREMAP) {
 		port->membase = ioremap_nocache(port->mapbase, 0x40);
-#endif
 
-		dev_err(port->dev, "can't remap port#%d\n", port->line);
+		if (IS_ERR(port->membase))
+			dev_err(port->dev, "can't remap port#%d\n", port->line);
+	} else {
+		/*
+		 * For the simple (and majority of) cases where we don't
+		 * need to do any remapping, just cast the cookie
+		 * directly.
+		 */
+		port->membase = (void __iomem *)port->mapbase;
 	}
 }
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct sci_port *s = &sci_ports[port->line];
+	struct sci_port *s = to_sci_port(port);
 
 	if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
 		return -EINVAL;
@@ -1032,63 +1065,60 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static void __init sci_init_ports(void)
+static void __devinit sci_init_single(struct platform_device *dev,
+				      struct sci_port *sci_port,
+				      unsigned int index,
+				      struct plat_sci_port *p)
 {
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-
-	first = 0;
-
-	for (i = 0; i < SCI_NPORTS; i++) {
-		sci_ports[i].port.ops		= &sci_uart_ops;
-		sci_ports[i].port.iotype	= UPIO_MEM;
-		sci_ports[i].port.line		= i;
-		sci_ports[i].port.fifosize	= 1;
+	sci_port->port.ops	= &sci_uart_ops;
+	sci_port->port.iotype	= UPIO_MEM;
+	sci_port->port.line	= index;
+	sci_port->port.fifosize	= 1;
 
 #if defined(__H8300H__) || defined(__H8300S__)
 #ifdef __H8300S__
-		sci_ports[i].enable	= h8300_sci_enable;
-		sci_ports[i].disable	= h8300_sci_disable;
+	sci_port->enable	= h8300_sci_enable;
+	sci_port->disable	= h8300_sci_disable;
 #endif
-		sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+	sci_port->port.uartclk	= CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_HAVE_CLK)
-		/*
-		 * XXX: We should use a proper SCI/SCIF clock
-		 */
-		{
-			struct clk *clk = clk_get(NULL, "module_clk");
-			sci_ports[i].port.uartclk = clk_get_rate(clk);
-			clk_put(clk);
-		}
+	sci_port->iclk		= p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+	sci_port->dclk		= clk_get(&dev->dev, "peripheral_clk");
+	sci_port->enable	= sci_clk_enable;
+	sci_port->disable	= sci_clk_disable;
 #else
 #error "Need a valid uartclk"
 #endif
 
-		sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
-		sci_ports[i].break_timer.function = sci_break_timer;
+	sci_port->break_timer.data = (unsigned long)sci_port;
+	sci_port->break_timer.function = sci_break_timer;
+	init_timer(&sci_port->break_timer);
 
-		init_timer(&sci_ports[i].break_timer);
-	}
-}
-
-int __init early_sci_setup(struct uart_port *port)
-{
-	if (unlikely(port->line > SCI_NPORTS))
-		return -ENODEV;
+	sci_port->port.mapbase	= p->mapbase;
+	sci_port->port.membase	= p->membase;
 
-	sci_init_ports();
+	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
+	sci_port->port.flags	= p->flags;
+	sci_port->port.dev	= &dev->dev;
+	sci_port->type		= sci_port->port.type = p->type;
 
-	sci_ports[port->line].port.membase	= port->membase;
-	sci_ports[port->line].port.mapbase	= port->mapbase;
-	sci_ports[port->line].port.type		= port->type;
+	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
 
-	return 0;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+	struct uart_driver *p = &sci_uart_driver;
+	*index = co->index;
+	return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+	sci_poll_put_char(port, ch);
+}
+
 /*
  *	Print a string to the serial port trying not to disturb
  *	any possible real use of the port...
@@ -1096,25 +1126,27 @@ int __init early_sci_setup(struct uart_port *port)
 static void serial_console_write(struct console *co, const char *s,
 				 unsigned count)
 {
-	struct uart_port *port = &serial_console_port->port;
+	struct uart_port *port = co->data;
+	struct sci_port *sci_port = to_sci_port(port);
 	unsigned short bits;
-	int i;
 
-	for (i = 0; i < count; i++) {
-		if (*s == 10)
-			sci_poll_put_char(port, '\r');
+	if (sci_port->enable)
+		sci_port->enable(port);
 
-		sci_poll_put_char(port, *s++);
-	}
+	uart_console_write(port, s, count, serial_console_putchar);
 
 	/* wait until fifo is empty and last bit has been transmitted */
 	bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
 	while ((sci_in(port, SCxSR) & bits) != bits)
 		cpu_relax();
+
+	if (sci_port->disable);
+		sci_port->disable(port);
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
 {
+	struct sci_port *sci_port;
 	struct uart_port *port;
 	int baud = 115200;
 	int bits = 8;
@@ -1130,8 +1162,9 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (co->index >= SCI_NPORTS)
 		co->index = 0;
 
-	serial_console_port = &sci_ports[co->index];
-	port = &serial_console_port->port;
+	sci_port = &sci_ports[co->index];
+	port = &sci_port->port;
+	co->data = port;
 
 	/*
 	 * Also need to check port->type, we don't actually have any
@@ -1141,21 +1174,11 @@ static int __init serial_console_setup(struct console *co, char *options)
 	 */
 	if (!port->type)
 		return -ENODEV;
-	if (!port->membase || !port->mapbase)
-		return -ENODEV;
-
-	port->type = serial_console_port->type;
-
-#ifdef CONFIG_HAVE_CLK
-	if (!serial_console_port->clk)
-		serial_console_port->clk = clk_get(NULL, "module_clk");
-#endif
 
-	if (port->flags & UPF_IOREMAP)
-		sci_config_port(port, 0);
+	sci_config_port(port, 0);
 
-	if (serial_console_port->enable)
-		serial_console_port->enable(port);
+	if (sci_port->enable)
+		sci_port->enable(port);
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1166,22 +1189,21 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (ret == 0)
 		sci_stop_rx(port);
 #endif
+	/* TODO: disable clock */
 	return ret;
 }
 
 static struct console serial_console = {
 	.name		= "ttySC",
-	.device		= uart_console_device,
+	.device		= serial_console_device,
 	.write		= serial_console_write,
 	.setup		= serial_console_setup,
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
-	.data		= &sci_uart_driver,
 };
 
 static int __init sci_console_init(void)
 {
-	sci_init_ports();
 	register_console(&serial_console);
 	return 0;
 }
@@ -1207,6 +1229,61 @@ static struct uart_driver sci_uart_driver = {
 	.cons		= SCI_CONSOLE,
 };
 
+
+static int sci_remove(struct platform_device *dev)
+{
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
+
+#ifdef CONFIG_HAVE_CLK
+	cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_remove_one_port(&sci_uart_driver, &p->port);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	kfree(priv);
+	return 0;
+}
+
+static int __devinit sci_probe_single(struct platform_device *dev,
+				      unsigned int index,
+				      struct plat_sci_port *p,
+				      struct sci_port *sciport)
+{
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	unsigned long flags;
+	int ret;
+
+	/* Sanity check */
+	if (unlikely(index >= SCI_NPORTS)) {
+		dev_notice(&dev->dev, "Attempting to register port "
+			   "%d when only %d are available.\n",
+			   index+1, SCI_NPORTS);
+		dev_notice(&dev->dev, "Consider bumping "
+			   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+		return 0;
+	}
+
+	sci_init_single(dev, sciport, index, p);
+
+	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&sciport->node);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	list_add(&sciport->node, &priv->ports);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
 /*
  * Register a set of serial devices attached to a platform device.  The
  * list is terminated with a zero flags entry, which means we expect
@@ -1216,57 +1293,34 @@ static struct uart_driver sci_uart_driver = {
 static int __devinit sci_probe(struct platform_device *dev)
 {
 	struct plat_sci_port *p = dev->dev.platform_data;
+	struct sh_sci_priv *priv;
 	int i, ret = -EINVAL;
 
-	for (i = 0; p && p->flags != 0; p++, i++) {
-		struct sci_port *sciport = &sci_ports[i];
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-		/* Sanity check */
-		if (unlikely(i == SCI_NPORTS)) {
-			dev_notice(&dev->dev, "Attempting to register port "
-				   "%d when only %d are available.\n",
-				   i+1, SCI_NPORTS);
-			dev_notice(&dev->dev, "Consider bumping "
-				   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
-			break;
-		}
+	INIT_LIST_HEAD(&priv->ports);
+	spin_lock_init(&priv->lock);
+	platform_set_drvdata(dev, priv);
 
-		sciport->port.mapbase	= p->mapbase;
+#ifdef CONFIG_HAVE_CLK
+	priv->clk_nb.notifier_call = sci_notifier;
+	cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
 
-		if (p->mapbase && !p->membase) {
-			if (p->flags & UPF_IOREMAP) {
-				p->membase = ioremap_nocache(p->mapbase, 0x40);
-				if (IS_ERR(p->membase)) {
-					ret = PTR_ERR(p->membase);
-					goto err_unreg;
-				}
-			} else {
-				/*
-				 * For the simple (and majority of) cases
-				 * where we don't need to do any remapping,
-				 * just cast the cookie directly.
-				 */
-				p->membase = (void __iomem *)p->mapbase;
-			}
+	if (dev->id != -1) {
+		ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+		if (ret)
+			goto err_unreg;
+	} else {
+		for (i = 0; p && p->flags != 0; p++, i++) {
+			ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+			if (ret)
+				goto err_unreg;
 		}
-
-		sciport->port.membase	= p->membase;
-
-		sciport->port.irq	= p->irqs[SCIx_TXI_IRQ];
-		sciport->port.flags	= p->flags;
-		sciport->port.dev	= &dev->dev;
-
-		sciport->type		= sciport->port.type = p->type;
-
-		memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
-		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
-#ifdef CONFIG_HAVE_CLK
-	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 	sh_bios_gdb_detach();
 #endif
@@ -1274,50 +1328,36 @@ static int __devinit sci_probe(struct platform_device *dev)
 	return 0;
 
 err_unreg:
-	for (i = i - 1; i >= 0; i--)
-		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
+	sci_remove(dev);
 	return ret;
 }
 
-static int __devexit sci_remove(struct platform_device *dev)
-{
-	int i;
-
-#ifdef CONFIG_HAVE_CLK
-	cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
-	for (i = 0; i < SCI_NPORTS; i++)
-		uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
-	return 0;
-}
-
 static int sci_suspend(struct platform_device *dev, pm_message_t state)
 {
-	int i;
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
 
-	for (i = 0; i < SCI_NPORTS; i++) {
-		struct sci_port *p = &sci_ports[i];
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_suspend_port(&sci_uart_driver, &p->port);
 
-		if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-			uart_suspend_port(&sci_uart_driver, &p->port);
-	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
 
 static int sci_resume(struct platform_device *dev)
 {
-	int i;
+	struct sh_sci_priv *priv = platform_get_drvdata(dev);
+	struct sci_port *p;
+	unsigned long flags;
 
-	for (i = 0; i < SCI_NPORTS; i++) {
-		struct sci_port *p = &sci_ports[i];
+	spin_lock_irqsave(&priv->lock, flags);
+	list_for_each_entry(p, &priv->ports, node)
+		uart_resume_port(&sci_uart_driver, &p->port);
 
-		if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
-			uart_resume_port(&sci_uart_driver, &p->port);
-	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
@@ -1339,8 +1379,6 @@ static int __init sci_init(void)
 
 	printk(banner);
 
-	sci_init_ports();
-
 	ret = uart_register_driver(&sci_uart_driver);
 	if (likely(ret == 0)) {
 		ret = platform_driver_register(&sci_driver);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d0aa82d7fce..38072c15b84 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -91,6 +91,9 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER              0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -314,7 +317,18 @@
     }									\
   }
 
-#define CPU_SCIF_FNS(name, scif_offset, scif_size)				\
+#ifdef CONFIG_H8300
+/* h8300 don't have SCIF */
+#define CPU_SCIF_FNS(name)						\
+  static inline unsigned int sci_##name##_in(struct uart_port *port)	\
+  {									\
+    return 0;								\
+  }									\
+  static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+  {									\
+  }
+#else
+#define CPU_SCIF_FNS(name, scif_offset, scif_size)			\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
     SCI_IN(scif_size, scif_offset);					\
@@ -323,6 +337,7 @@
   {									\
     SCI_OUT(scif_size, scif_offset, value);				\
   }
+#endif
 
 #define CPU_SCI_FNS(name, sci_offset, sci_size)				\
   static inline unsigned int sci_##name##_in(struct uart_port* port)	\
@@ -360,8 +375,10 @@
 		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
                  h8_sci_offset, h8_sci_size) \
   CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
-#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+  CPU_SCIF_FNS(name)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
         #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
                 CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
         #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
@@ -390,7 +407,8 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
 SCIx_FNS(SCBRR,  0x04,  8, 0x04,  8)
 SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
@@ -604,10 +622,21 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
         return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#  define SCFSR    0x0010
+#  define SCASSR   0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->type == PORT_SCIF)
+		return ctrl_inw((port->mapbase + SCFSR))  & SCIF_BRK ? 1 : 0;
+	if (port->type == PORT_SCIFA)
+		return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-         return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
 }
 #elif defined(__H8300H__) || defined(__H8300S__)
 static inline int sci_rxd_in(struct uart_port *port)
@@ -757,7 +786,8 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
 {
 	if (port->type == PORT_SCIF)
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
new file mode 100644
index 00000000000..ac9e5d5f742
--- /dev/null
+++ b/drivers/serial/timbuart.c
@@ -0,0 +1,526 @@
+/*
+ * timbuart.c timberdale FPGA UART driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+
+#include "timbuart.h"
+
+struct timbuart_port {
+	struct uart_port	port;
+	struct tasklet_struct	tasklet;
+	int			usedma;
+	u8			last_ier;
+	struct platform_device  *dev;
+};
+
+static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
+	921600, 1843200, 3250000};
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
+
+static void timbuart_stop_rx(struct uart_port *port)
+{
+	/* spin lock held by upper layer, disable all RX interrupts */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_stop_tx(struct uart_port *port)
+{
+	/* spinlock held by upper layer, disable TX interrupt */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_start_tx(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	/* do not transfer anything here -> fire off the tasklet */
+	tasklet_schedule(&uart->tasklet);
+}
+
+static void timbuart_flush_buffer(struct uart_port *port)
+{
+	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+
+	iowrite8(ctl, port->membase + TIMBUART_CTRL);
+	iowrite8(TXBF, port->membase + TIMBUART_ISR);
+}
+
+static void timbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+
+	while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+		port->icount.rx++;
+		tty_insert_flip_char(tty, ch, TTY_NORMAL);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(port->info->port.tty);
+	spin_lock(&port->lock);
+
+	dev_dbg(port->dev, "%s - total read %d bytes\n",
+		__func__, port->icount.rx);
+}
+
+static void timbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+
+	while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+		!uart_circ_empty(xmit)) {
+		iowrite8(xmit->buf[xmit->tail],
+			port->membase + TIMBUART_TXFIFO);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	dev_dbg(port->dev,
+		"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
+		 __func__,
+		port->icount.tx,
+		ioread8(port->membase + TIMBUART_CTRL),
+		port->mctrl & TIOCM_RTS,
+		ioread8(port->membase + TIMBUART_BAUDRATE));
+}
+
+static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	struct circ_buf *xmit = &port->info->xmit;
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		return;
+
+	if (port->x_char)
+		return;
+
+	if (isr & TXFLAGS) {
+		timbuart_tx_chars(port);
+		/* clear all TX interrupts */
+		iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+
+		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+			uart_write_wakeup(port);
+	} else
+		/* Re-enable any tx interrupt */
+		*ier |= uart->last_ier & TXFLAGS;
+
+	/* enable interrupts if there are chars in the transmit buffer,
+	 * Or if we delivered some bytes and want the almost empty interrupt
+	 * we wake up the upper layer later when we got the interrupt
+	 * to give it some time to go out...
+	 */
+	if (!uart_circ_empty(xmit))
+		*ier |= TXBAE;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	if (isr & RXFLAGS) {
+		/* Some RX status is set */
+		if (isr & RXBF) {
+			u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+				TIMBUART_CTRL_FLSHRX;
+			iowrite8(ctl, port->membase + TIMBUART_CTRL);
+			port->icount.overrun++;
+		} else if (isr & (RXDP))
+			timbuart_rx_chars(port);
+
+		/* ack all RX interrupts */
+		iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+	}
+
+	/* always have the RX interrupts enabled */
+	*ier |= RXBAF | RXBF | RXTT;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_tasklet(unsigned long arg)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)arg;
+	u8 isr, ier = 0;
+
+	spin_lock(&uart->port.lock);
+
+	isr = ioread8(uart->port.membase + TIMBUART_ISR);
+	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
+
+	if (!uart->usedma)
+		timbuart_handle_tx_port(&uart->port, isr, &ier);
+
+	timbuart_mctrl_check(&uart->port, isr, &ier);
+
+	if (!uart->usedma)
+		timbuart_handle_rx_port(&uart->port, isr, &ier);
+
+	iowrite8(ier, uart->port.membase + TIMBUART_IER);
+
+	spin_unlock(&uart->port.lock);
+	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
+}
+
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+	u8 isr = ioread8(port->membase + TIMBUART_ISR);
+
+	return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int timbuart_get_mctrl(struct uart_port *port)
+{
+	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
+
+	if (cts & TIMBUART_CTRL_CTS)
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	else
+		return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
+
+	if (mctrl & TIOCM_RTS)
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+	else
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+}
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+{
+	unsigned int cts;
+
+	if (isr & CTS_DELTA) {
+		/* ack */
+		iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+		cts = timbuart_get_mctrl(port);
+		uart_handle_cts_change(port, cts & TIOCM_CTS);
+		wake_up_interruptible(&port->info->delta_msr_wait);
+	}
+
+	*ier |= CTS_DELTA;
+}
+
+static void timbuart_enable_ms(struct uart_port *port)
+{
+	/* N/A */
+}
+
+static void timbuart_break_ctl(struct uart_port *port, int ctl)
+{
+	/* N/A */
+}
+
+static int timbuart_startup(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	dev_dbg(port->dev, "%s\n", __func__);
+
+	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
+	iowrite8(0xff, port->membase + TIMBUART_ISR);
+	/* Enable all but TX interrupts */
+	iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+		port->membase + TIMBUART_IER);
+
+	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
+		"timb-uart", uart);
+}
+
+static void timbuart_shutdown(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	dev_dbg(port->dev, "%s\n", __func__);
+	free_irq(port->irq, uart);
+	iowrite8(0, port->membase + TIMBUART_IER);
+}
+
+static int get_bindex(int baud)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(baudrates); i++)
+		if (baud <= baudrates[i])
+			return i;
+
+	return -1;
+}
+
+static void timbuart_set_termios(struct uart_port *port,
+	struct ktermios *termios,
+	struct ktermios *old)
+{
+	unsigned int baud;
+	short bindex;
+	unsigned long flags;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	bindex = get_bindex(baud);
+	dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
+
+	if (bindex < 0)
+		bindex = 0;
+	baud = baudrates[bindex];
+
+	/* The serial layer calls into this once with old = NULL when setting
+	   up initially */
+	if (old)
+		tty_termios_copy_hw(termios, old);
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+	iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *timbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
+}
+
+/* We do not request/release mappings of the registers here,
+ * currently it's done in the proble function.
+ */
+static void timbuart_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+
+	release_mem_region(port->mapbase, size);
+}
+
+static int timbuart_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (!request_mem_region(port->mapbase, size, "timb-uart"))
+		return -EBUSY;
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = ioremap(port->mapbase, size);
+		if (port->membase == NULL) {
+			release_mem_region(port->mapbase, size);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)devid;
+
+	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
+		uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+
+		/* disable interrupts, the tasklet enables them again */
+		iowrite8(0, uart->port.membase + TIMBUART_IER);
+
+		/* fire off bottom half */
+		tasklet_schedule(&uart->tasklet);
+
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void timbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_TIMBUART;
+		timbuart_request_port(port);
+	}
+}
+
+static int timbuart_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	/* we don't want the core code to modify any port params */
+	return -EINVAL;
+}
+
+static struct uart_ops timbuart_ops = {
+	.tx_empty = timbuart_tx_empty,
+	.set_mctrl = timbuart_set_mctrl,
+	.get_mctrl = timbuart_get_mctrl,
+	.stop_tx = timbuart_stop_tx,
+	.start_tx = timbuart_start_tx,
+	.flush_buffer = timbuart_flush_buffer,
+	.stop_rx = timbuart_stop_rx,
+	.enable_ms = timbuart_enable_ms,
+	.break_ctl = timbuart_break_ctl,
+	.startup = timbuart_startup,
+	.shutdown = timbuart_shutdown,
+	.set_termios = timbuart_set_termios,
+	.type = timbuart_type,
+	.release_port = timbuart_release_port,
+	.request_port = timbuart_request_port,
+	.config_port = timbuart_config_port,
+	.verify_port = timbuart_verify_port
+};
+
+static struct uart_driver timbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "timberdale_uart",
+	.dev_name = "ttyTU",
+	.major = TIMBUART_MAJOR,
+	.minor = TIMBUART_MINOR,
+	.nr = 1
+};
+
+static int timbuart_probe(struct platform_device *dev)
+{
+	int err;
+	struct timbuart_port *uart;
+	struct resource *iomem;
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+	if (!uart) {
+		err = -EINVAL;
+		goto err_mem;
+	}
+
+	uart->usedma = 0;
+
+	uart->port.uartclk = 3250000 * 16;
+	uart->port.fifosize  = TIMBUART_FIFO_SIZE;
+	uart->port.regshift  = 2;
+	uart->port.iotype  = UPIO_MEM;
+	uart->port.ops = &timbuart_ops;
+	uart->port.irq = 0;
+	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	uart->port.line  = 0;
+	uart->port.dev	= &dev->dev;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		err = -ENOMEM;
+		goto err_register;
+	}
+	uart->port.mapbase = iomem->start;
+	uart->port.membase = NULL;
+
+	uart->port.irq = platform_get_irq(dev, 0);
+	if (uart->port.irq < 0) {
+		err = -EINVAL;
+		goto err_register;
+	}
+
+	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
+
+	err = uart_register_driver(&timbuart_driver);
+	if (err)
+		goto err_register;
+
+	err = uart_add_one_port(&timbuart_driver, &uart->port);
+	if (err)
+		goto err_add_port;
+
+	platform_set_drvdata(dev, uart);
+
+	return 0;
+
+err_add_port:
+	uart_unregister_driver(&timbuart_driver);
+err_register:
+	kfree(uart);
+err_mem:
+	printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
+		err);
+
+	return err;
+}
+
+static int timbuart_remove(struct platform_device *dev)
+{
+	struct timbuart_port *uart = platform_get_drvdata(dev);
+
+	tasklet_kill(&uart->tasklet);
+	uart_remove_one_port(&timbuart_driver, &uart->port);
+	uart_unregister_driver(&timbuart_driver);
+	kfree(uart);
+
+	return 0;
+}
+
+static struct platform_driver timbuart_platform_driver = {
+	.driver = {
+		.name	= "timb-uart",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= timbuart_probe,
+	.remove		= timbuart_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbuart_init(void)
+{
+	return platform_driver_register(&timbuart_platform_driver);
+}
+
+static void __exit timbuart_exit(void)
+{
+	platform_driver_unregister(&timbuart_platform_driver);
+}
+
+module_init(timbuart_init);
+module_exit(timbuart_exit);
+
+MODULE_DESCRIPTION("Timberdale UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:timb-uart");
+
diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h
new file mode 100644
index 00000000000..7e566766bc4
--- /dev/null
+++ b/drivers/serial/timbuart.h
@@ -0,0 +1,58 @@
+/*
+ * timbuart.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#ifndef _TIMBUART_H
+#define _TIMBUART_H
+
+#define TIMBUART_FIFO_SIZE	2048
+
+#define TIMBUART_RXFIFO		0x08
+#define TIMBUART_TXFIFO		0x0c
+#define TIMBUART_IER		0x10
+#define TIMBUART_IPR		0x14
+#define TIMBUART_ISR		0x18
+#define TIMBUART_CTRL		0x1c
+#define TIMBUART_BAUDRATE	0x20
+
+#define TIMBUART_CTRL_RTS	0x01
+#define TIMBUART_CTRL_CTS	0x02
+#define TIMBUART_CTRL_FLSHTX	0x40
+#define TIMBUART_CTRL_FLSHRX	0x80
+
+#define TXBF		0x01
+#define TXBAE		0x02
+#define CTS_DELTA	0x04
+#define RXDP		0x08
+#define RXBAF		0x10
+#define RXBF		0x20
+#define RXTT		0x40
+#define RXBNAE		0x80
+#define TXBE		0x100
+
+#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE)
+#define TXFLAGS (TXBF | TXBAE)
+
+#define TIMBUART_MAJOR 204
+#define TIMBUART_MINOR 192
+
+#endif /* _TIMBUART_H */
+