summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-11-12 16:02:30 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-11-12 16:02:30 -0800
commitedaa4d668babd65e98e1452043996bbefc0285b0 (patch)
treea6cf4c6083ae49e8d1b7a4efc92a32864a79e534 /drivers/serial
parent891cbd30ef456664e50bbd28436ef3006a81cf7c (diff)
parent40e3465db2cffd64e069ca82ee981025554bc159 (diff)
Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: Fix length handling n_gsm: Copy n2 over when configuring via ioctl interface serial: bfin_5xx: grab port lock before making port termios changes serial: bfin_5xx: disable CON_PRINTBUFFER for consoles serial: bfin_5xx: remove redundant SSYNC to improve TX speed serial: bfin_5xx: always include DMA headers vcs: make proper usage of the poll flags amiserial: Remove unused variable icount 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang tty_ldisc: Fix BUG() on hangup TTY: restore tty_ldisc_wait_idle SERIAL: blacklist si3052 chip drivers/serial/bfin_5xx.c: Fix line continuation defects tty: prevent DOS in the flush_to_ldisc 8250: add support for Kouwell KW-L221N-2 nozomi: Fix warning from the previous TIOCGCOUNT changes tty: fix warning in synclink driver tty: Fix formatting in tty.h tty: the development tree is now done in git
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c5
-rw-r--r--drivers/serial/8250_pci.c5
-rw-r--r--drivers/serial/bfin_5xx.c31
3 files changed, 30 insertions, 11 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b7aa9..dd5e1ac2225 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2343,8 +2343,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* CTS flow control flag and modem status interrupts
+ * Only disable MSI if no threads are waiting in
+ * serial_core::uart_wait_modem_status
*/
- up->ier &= ~UART_IER_MSI;
+ if (!waitqueue_active(&up->port.state->port.delta_msr_wait))
+ up->ier &= ~UART_IER_MSI;
if (!(up->bugs & UART_BUG_NOMSR) &&
UART_ENABLE_MS(&up->port, termios->c_cflag))
up->ier |= UART_IER_MSI;
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53be4d35a0a..842e3b2a02b 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
static const struct pci_device_id softmodem_blacklist[] = {
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+ { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+ { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
};
/*
@@ -2863,6 +2865,9 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
0, 0,
pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, 0x9505,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
/*
* The below card is a little controversial since it is the
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a9eff2b18ea..19cac9f610f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -23,6 +23,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -33,12 +34,10 @@
#include <asm/gpio.h>
#include <mach/bfin_serial_5xx.h>
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
-#endif
#ifdef CONFIG_SERIAL_BFIN_MODULE
# undef CONFIG_EARLY_PRINTK
@@ -360,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx++;
- SSYNC();
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -688,6 +686,13 @@ static int bfin_serial_startup(struct uart_port *port)
# ifdef CONFIG_BF54x
{
+ /*
+ * UART2 and UART3 on BF548 share interrupt PINs and DMA
+ * controllers with SPORT2 and SPORT3. UART rx and tx
+ * interrupts are generated in PIO mode only when configure
+ * their peripheral mapping registers properly, which means
+ * request corresponding DMA channels in PIO mode as well.
+ */
unsigned uart_dma_ch_rx, uart_dma_ch_tx;
switch (uart->port.irq) {
@@ -734,8 +739,7 @@ static int bfin_serial_startup(struct uart_port *port)
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
- pr_info("Unable to attach BlackFin UART CTS interrupt.\
- So, disable it.\n");
+ pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
if (uart->rts_pin >= 0) {
@@ -747,8 +751,7 @@ static int bfin_serial_startup(struct uart_port *port)
if (request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
- pr_info("Unable to attach BlackFin UART Modem \
- Status interrupt.\n");
+ pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
/* CTS RTS PINs are negative assertive. */
@@ -846,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_cflag & CMSPAR)
lcr |= STP;
+ spin_lock_irqsave(&uart->port.lock, flags);
+
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (FE | PE);
@@ -875,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_line != N_IRDA)
quot -= ANOMALY_05000230;
- spin_lock_irqsave(&uart->port.lock, flags);
-
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
/* Disable UART */
@@ -1321,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ /*
+ * If we are using early serial, don't let the normal console rewind
+ * log buffer, since that causes things to be printed multiple times
+ */
+ bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();