Merge tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A fairly quiet release for SPI, mainly driver work.  A few highlights:

   - Supports bits per word compatibility checking in the core.
   - Allow use of the IP used in Freescale SPI controllers outside
     Freescale SoCs.
   - DMA support for the Atmel SPI driver.
   - New drivers for the BCM2835 and Tegra114"

* tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits)
  spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items
  spi-topcliff-pch: missing platform_driver_unregister() on error in pch_spi_init()
  ARM: dts: add pinctrl property for spi node for atmel SoC
  ARM: dts: add spi nodes for the atmel boards
  ARM: dts: add spi nodes for atmel SoC
  ARM: at91: add clocks for spi dt entries
  spi/spi-atmel: add dmaengine support
  spi/spi-atmel: add flag to controller data for lock operations
  spi/spi-atmel: add physical base address
  spi/sirf: fix MODULE_DEVICE_TABLE
  MAINTAINERS: Add git repository and update my address
  spi/s3c64xx: Check for errors in dmaengine prepare_transfer()
  spi/s3c64xx: Fix non-dmaengine usage
  spi: omap2-mcspi: fix error return code in omap2_mcspi_probe()
  spi/s3c64xx: let device core setup the default pin configuration
  MAINTAINERS: Update Grant's email address and maintainership
  spi: omap2-mcspi: Fix transfers if DMADEVICES is not set
  spi: s3c64xx: move to generic dmaengine API
  spi-gpio: init CS before spi_bitbang_setup()
  spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop
  ...

1 files changed, 9 insertions, 5 deletions

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 810413883c7..f5d84d6f822 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/ioport.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -68,6 +69,7 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 #define LPSS_TX_HITHRESH_DFLT	224
 
 /* Offset from drv_data->lpss_base */
+#define SSP_REG			0x0c
 #define SPI_CS_CONTROL		0x18
 #define SPI_CS_CONTROL_SW_MODE	BIT(0)
 #define SPI_CS_CONTROL_CS_HIGH	BIT(1)
@@ -138,6 +140,10 @@ detection_done:
 	/* Enable software chip select control */
 	value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
 	__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+
+	/* Enable multiblock DMA transfers */
+	if (drv_data->master_info->enable_dma)
+		__lpss_ssp_write_priv(drv_data, SSP_REG, 1);
 }
 
 static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
@@ -1083,11 +1089,9 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	ssp = &pdata->ssp;
 
 	ssp->phys_base = res->start;
-	ssp->mmio_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!ssp->mmio_base) {
-		dev_err(&pdev->dev, "failed to ioremap mmio_base\n");
-		return NULL;
-	}
+	ssp->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ssp->mmio_base))
+		return PTR_ERR(ssp->mmio_base);
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
 	ssp->irq = platform_get_irq(pdev, 0);