Staging: w35und: kill WBDEBUG and remove common.h header file

The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 files changed, 31 insertions, 57 deletions

diff --git a/drivers/staging/winbond/common.h b/drivers/staging/winbond/common.h
deleted file mode 100644
index 4409edd59ba..00000000000
--- a/drivers/staging/winbond/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-//
-// common.h
-//
-// This file contains the OS dependant definition and function.
-// Every OS has this file individual.
-//
-#ifndef COMMON_DEF
-#define COMMON_DEF
-
-//#define DEBUG_ENABLED  1
-
-//==================================================================================================
-// Common function definition
-//==================================================================================================
-#define DEBUG_ENABLED
-#ifdef DEBUG_ENABLED
-#define WBDEBUG( _M )	printk _M
-#else
-#define WBDEBUG( _M )	0
-#endif
-
-#endif // COMMON_DEF
-
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index a9d19456dc8..9a1483678e2 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -374,7 +374,7 @@ static void Mds_HeaderCopy(struct wbsoft_priv * adapter, PDESCRIPTOR pDes, u8 *T
 
 	pDes->TxRate = ctmp1;
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("Tx rate =%x\n", ctmp1));
+	printk("Tx rate =%x\n", ctmp1);
 	#endif
 
 	pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
@@ -442,7 +442,7 @@ Mds_Tx(struct wbsoft_priv * adapter)
 		FillIndex = pMds->TxFillIndex;
 		if (pMds->TxOwner[FillIndex]) { // Is owned by software 0:Yes 1:No
 #ifdef _PE_TX_DUMP_
-			WBDEBUG(("[Mds_Tx] Tx Owner is H/W.\n"));
+			printk("[Mds_Tx] Tx Owner is H/W.\n");
 #endif
 			break;
 		}
@@ -488,7 +488,7 @@ Mds_Tx(struct wbsoft_priv * adapter)
 			// For speed up Key setting
 			if (pTxDes->EapFix) {
 #ifdef _PE_TX_DUMP_
-				WBDEBUG(("35: EPA 4th frame detected. Size = %d\n", PacketSize));
+				printk("35: EPA 4th frame detected. Size = %d\n", PacketSize);
 #endif
 				pHwData->IsKeyPreSet = 1;
 			}
@@ -585,7 +585,7 @@ Mds_SendComplete(struct wbsoft_priv * adapter, PT02_DESCRIPTOR pT02)
 				else
 					pHwData->tx_retry_count[7] += RetryCount;
 				#ifdef _PE_STATE_DUMP_
-				WBDEBUG(("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count));
+				printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
 				#endif
 				MTO_SetTxCount(adapter, TxRate, RetryCount);
 			}
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 7718423280e..8c4107b56b7 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -83,7 +83,6 @@ void hal_get_dto_para(MTO_FUNC_INPUT, char *buffer);
 void MTO_Init(MTO_FUNC_INPUT)
 {
     int i;
-	//WBDEBUG(("[MTO] -> MTO_Init()\n"));
 	//[WKCHEN]pMTOcore_data = pcore_data;
 // 20040510 Turbo add for global variable
     MTO_TMR_CNT()       = 0;
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index ed08e0051d7..75738c8a1d1 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1114,7 +1114,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
 		//Start to fill RF parameters, PLL_ON should be pulled low.
 		Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
 #ifdef _PE_STATE_DUMP_
-		WBDEBUG(("* PLL_ON    low\n"));
+		printk("* PLL_ON    low\n");
 #endif
 
 		number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
@@ -1223,7 +1223,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
 			//pulled high
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    high\n"));
+			printk("* PLL_ON    high\n");
 			#endif
 
 			//2.4GHz
@@ -1243,7 +1243,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
 			//5GHz
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    low\n"));
+			printk("* PLL_ON    low\n");
 			#endif
 
 			number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
@@ -1255,7 +1255,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
 
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    high\n"));
+			printk("* PLL_ON    high\n");
 			#endif
 
 			//ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
@@ -1271,7 +1271,7 @@ RFSynthesizer_initial(phw_data_t pHwData)
 			msleep(5);
 
 			//Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
-			//WBDEBUG(("* PLL_ON    high\n"));
+			//printk("* PLL_ON    high\n");
 			break;
 
 		case RF_WB_242:
@@ -2011,7 +2011,7 @@ RFSynthesizer_SwitchingChannel(  phw_data_t pHwData,  ChanInfo Channel )
 
 			//Start to fill RF parameters, PLL_ON should be pulled low.
 			//Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
-			//WBDEBUG(("* PLL_ON    low\n"));
+			//printk("* PLL_ON    low\n");
 
 			//Channel independent registers
 			if( Channel.band != pHwData->band)
@@ -2036,7 +2036,7 @@ RFSynthesizer_SwitchingChannel(  phw_data_t pHwData,  ChanInfo Channel )
 				// Write to register. number must less and equal than 16
 				Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
 				#ifdef _PE_STATE_DUMP_
-				WBDEBUG(("Band changed\n"));
+				printk("Band changed\n");
 				#endif
 			}
 
@@ -2611,9 +2611,9 @@ void EEPROMTxVgaAdjust(  phw_data_t pHwData ) // 20060619.5 Add
 	}
 
 	#ifdef _PE_STATE_DUMP_
-	WBDEBUG((" TxVgaFor24 : \n"));
+	printk(" TxVgaFor24 : \n");
 	DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
-	WBDEBUG((" TxVgaFor50 : \n"));
+	printk(" TxVgaFor50 : \n");
 	DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
 	#endif
 }
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
index e9d1b73b0df..59ae5ef35d0 100644
--- a/drivers/staging/winbond/wb35reg.c
+++ b/drivers/staging/winbond/wb35reg.c
@@ -149,7 +149,7 @@ Wb35Reg_WriteSync(  phw_data_t pHwData,  u16 RegisterNo,  u32 RegisterValue )
 
 	if (ret < 0) {
 		#ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Write register usb message sending error\n"));
+		printk("EP0 Write register usb message sending error\n");
 		#endif
 
 		pHwData->SurpriseRemove = 1; // 20060704.2
@@ -316,7 +316,7 @@ Wb35Reg_ReadSync(  phw_data_t pHwData,  u16 RegisterNo,   u32 * pRegisterValue )
 
 	if (ret < 0) {
 		#ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Read register usb message sending error\n"));
+		printk("EP0 Read register usb message sending error\n");
 		#endif
 
 		pHwData->SurpriseRemove = 1; // 20060704.2
@@ -441,7 +441,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData )
 
 	if (ret < 0) {
 #ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Irp sending error\n"));
+		printk("EP0 Irp sending error\n");
 #endif
 		goto cleanup;
 	}
@@ -480,7 +480,7 @@ Wb35Reg_EP0VM_complete(struct urb *urb)
 
 		if (reg->EP0VM_status) {
 #ifdef _PE_REG_DUMP_
-			WBDEBUG(("EP0 IoCompleteRoutine return error\n"));
+			printk("EP0 IoCompleteRoutine return error\n");
 #endif
 			reg->EP0vm_state = VM_STOP;
 			pHwData->SurpriseRemove = 1;
@@ -529,7 +529,7 @@ Wb35Reg_destroy(phw_data_t pHwData)
 			kfree(reg_queue);
 		} else {
 			#ifdef _PE_REG_DUMP_
-			WBDEBUG(("EP0 queue release error\n"));
+			printk("EP0 queue release error\n");
 			#endif
 		}
 		spin_lock_irq( &reg->EP0VM_spin_lock );
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
index 63d55911893..029d91892a8 100644
--- a/drivers/staging/winbond/wb35rx.c
+++ b/drivers/staging/winbond/wb35rx.c
@@ -118,7 +118,7 @@ static u16 Wb35Rx_indicate(struct ieee80211_hw *hw)
 			// Basic check for Rx length. Is length valid?
 			if (PacketSize > MAX_PACKET_SIZE) {
 				#ifdef _PE_RX_DUMP_
-				WBDEBUG(("Serious ERROR : Rx data size too long, size =%d\n", PacketSize));
+				printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
 				#endif
 
 				pWb35Rx->EP3vm_state = VM_STOP;
@@ -194,7 +194,7 @@ static void Wb35Rx_Complete(struct urb *urb)
 	// The URB is completed, check the result
 	if (pWb35Rx->EP3VM_status != 0) {
 		#ifdef _PE_USB_STATE_DUMP_
-		WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
+		printk("EP3 IoCompleteRoutine return error\n");
 		#endif
 		pWb35Rx->EP3vm_state = VM_STOP;
 		goto error;
@@ -259,7 +259,7 @@ static void Wb35Rx(struct ieee80211_hw *hw)
 	if (!pWb35Rx->RxOwner[RxBufferId]) {
 		// It's impossible to run here.
 		#ifdef _PE_RX_DUMP_
-		WBDEBUG(("Rx driver fifo unavailable\n"));
+		printk("Rx driver fifo unavailable\n");
 		#endif
 		goto error;
 	}
@@ -348,7 +348,7 @@ void Wb35Rx_stop(phw_data_t pHwData)
 	if (pWb35Rx->EP3vm_state == VM_RUNNING) {
 		usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
 		#ifdef _PE_RX_DUMP_
-		WBDEBUG(("EP3 Rx stop\n"));
+		printk("EP3 Rx stop\n");
 		#endif
 	}
 }
@@ -366,7 +366,7 @@ void Wb35Rx_destroy(phw_data_t pHwData)
 	if (pWb35Rx->RxUrb)
 		usb_free_urb( pWb35Rx->RxUrb );
 	#ifdef _PE_RX_DUMP_
-	WBDEBUG(("Wb35Rx_destroy OK\n"));
+	printk("Wb35Rx_destroy OK\n");
 	#endif
 }
 
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index b9b4456c808..f7fe8d60a7e 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -153,14 +153,14 @@ void Wb35Tx_stop(phw_data_t pHwData)
 	if (pWb35Tx->EP2vm_state == VM_RUNNING)
 		usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("EP2 Tx stop\n"));
+	printk("EP2 Tx stop\n");
 	#endif
 
 	// Trying to canceling the Irp of EP4
 	if (pWb35Tx->EP4vm_state == VM_RUNNING)
 		usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("EP4 Tx stop\n"));
+	printk("EP4 Tx stop\n");
 	#endif
 }
 
@@ -182,7 +182,7 @@ void Wb35Tx_destroy(phw_data_t pHwData)
 		usb_free_urb( pWb35Tx->Tx2Urb );
 
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("Wb35Tx_destroy OK\n"));
+	printk("Wb35Tx_destroy OK\n");
 	#endif
 }
 
@@ -229,7 +229,7 @@ static void Wb35Tx_EP2VM_complete(struct urb * pUrb)
 
 	//The Urb is completed, check the result
 	if (pWb35Tx->EP2VM_status != 0) {
-		WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
+		printk("EP2 IoCompleteRoutine return error\n");
 		pWb35Tx->EP2vm_state= VM_STOP;
 		goto error;
 	}
@@ -279,7 +279,7 @@ static void Wb35Tx_EP2VM(struct wbsoft_priv *adapter)
 
 	if (retv < 0) {
 		#ifdef _PE_TX_DUMP_
-		WBDEBUG(("EP2 Tx Irp sending error\n"));
+		printk("EP2 Tx Irp sending error\n");
 		#endif
 		goto error;
 	}
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index a2cc0776fc6..c8313dba7dc 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -396,7 +396,7 @@ static void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel )
 	pHwData->Channel = channel.ChanNo;
 	pHwData->band = channel.band;
 	#ifdef _PE_STATE_DUMP_
-	WBDEBUG(("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band));
+	printk("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
 	#endif
 	reg->M28_MacControl &= ~0xff; // Clean channel information field
 	reg->M28_MacControl |= channel.ChanNo;
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 9353ac259e8..64d8e615d66 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -4,8 +4,6 @@
 #include <linux/types.h>
 #include <linux/if_ether.h> /* for ETH_ALEN */
 
-#include "common.h"
-
 //[20040722 WK]
 #define HAL_LED_SET_MASK		0x001c	//20060901 Extend
 #define HAL_LED_SET_SHIFT		2
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 3b6ecd11a02..853ec39137f 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -277,7 +277,7 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
 	//get current antenna
 	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
 #ifdef _PE_STATE_DUMP_
-	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+	printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
 #endif
 	hal_get_hw_radio_off( pHwData );
 
@@ -404,7 +404,7 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
 	// Turn off Rx and Tx hardware ability
 	hal_stop( &adapter->sHwData );
 #ifdef _PE_USB_INI_DUMP_
-	WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+	printk("[w35und] Hal_stop O.K.\n");
 #endif
 	msleep(100);// Waiting Irp completed