Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.

15 files changed, 68 insertions, 56 deletions

diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig
index f4cf9b23481..379cf16e89f 100644
--- a/drivers/staging/brcm80211/Kconfig
+++ b/drivers/staging/brcm80211/Kconfig
@@ -7,6 +7,7 @@ config BRCMSMAC
 	default n
 	depends on PCI
 	depends on WLAN && MAC80211
+	depends on X86 || MIPS
 	select BRCMUTIL
 	select FW_LOADER
 	select CRC_CCITT
@@ -20,6 +21,7 @@ config BRCMFMAC
 	default n
 	depends on MMC
 	depends on WLAN && CFG80211
+	depends on X86 || MIPS
 	select BRCMUTIL
 	select FW_LOADER
 	select WIRELESS_EXT
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 1502d80f6f7..20008a4376e 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -2,6 +2,7 @@ config COMEDI
 	tristate "Data acquisition support (comedi)"
 	default N
 	depends on m
+	depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
 	---help---
 	  Enable support a wide range of data acquisition devices
 	  for Linux.
@@ -160,6 +161,7 @@ config COMEDI_PCL730
 
 config COMEDI_PCL812
 	tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
@@ -171,6 +173,7 @@ config COMEDI_PCL812
 
 config COMEDI_PCL816
 	tristate "Advantech PCL-814 and PCL-816 ISA card support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -180,6 +183,7 @@ config COMEDI_PCL816
 
 config COMEDI_PCL818
 	tristate "Advantech PCL-718 and PCL-818 ISA card support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-818 ISA cards
@@ -269,6 +273,7 @@ config COMEDI_DAS800
 
 config COMEDI_DAS1800
 	tristate "DAS1800 and compatible ISA card support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -340,6 +345,7 @@ config COMEDI_DT2817
 config COMEDI_DT282X
 	tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Data Translation DT2821 series including DT-EZ
@@ -419,6 +425,7 @@ config COMEDI_ADQ12B
 config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
 	depends on COMEDI_NI_COMMON
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for National Instruments AT-A2150 cards
@@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI
 
 config COMEDI_ADDI_APCI_035
 	tristate "ADDI-DATA APCI_035 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_035 cards
@@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035
 
 config COMEDI_ADDI_APCI_1032
 	tristate "ADDI-DATA APCI_1032 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1032 cards
@@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032
 
 config COMEDI_ADDI_APCI_1500
 	tristate "ADDI-DATA APCI_1500 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1500 cards
@@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500
 
 config COMEDI_ADDI_APCI_1516
 	tristate "ADDI-DATA APCI_1516 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1516 cards
@@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516
 
 config COMEDI_ADDI_APCI_1564
 	tristate "ADDI-DATA APCI_1564 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1564 cards
@@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564
 
 config COMEDI_ADDI_APCI_16XX
 	tristate "ADDI-DATA APCI_16xx support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_16xx cards
@@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX
 
 config COMEDI_ADDI_APCI_2016
 	tristate "ADDI-DATA APCI_2016 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2016 cards
@@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016
 
 config COMEDI_ADDI_APCI_2032
 	tristate "ADDI-DATA APCI_2032 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2032 cards
@@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032
 
 config COMEDI_ADDI_APCI_2200
 	tristate "ADDI-DATA APCI_2200 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2200 cards
@@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200
 
 config COMEDI_ADDI_APCI_3001
 	tristate "ADDI-DATA APCI_3001 support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001
 
 config COMEDI_ADDI_APCI_3120
 	tristate "ADDI-DATA APCI_3520 support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120
 
 config COMEDI_ADDI_APCI_3501
 	tristate "ADDI-DATA APCI_3501 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3501 cards
@@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501
 
 config COMEDI_ADDI_APCI_3XXX
 	tristate "ADDI-DATA APCI_3xxx support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3xxx cards
@@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111
 config COMEDI_ADL_PCI9118
 	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC
 	depends on COMEDI_MITE
 	select COMEDI_8255
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for National Instruments Lab-PC and compatibles
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index f96d5b5d514..d329635fb5c 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig IIO
 	tristate "Industrial I/O support"
-	depends on !S390
+	depends on GENERIC_HARDIRQS
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index 0b9b85424df..4cc1a5bfab4 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -81,7 +81,6 @@ struct adis16201_state {
 
 int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 enum adis16201_scan {
 	ADIS16201_SCAN_SUPPLY,
 	ADIS16201_SCAN_ACC_X,
@@ -92,6 +91,7 @@ enum adis16201_scan {
 	ADIS16201_SCAN_INCLI_Y,
 };
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16201_remove_trigger(struct iio_dev *indio_dev);
 int adis16201_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 8bb8ce50c24..175e21bb9b4 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -76,7 +76,6 @@ struct adis16203_state {
 
 int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 enum adis16203_scan {
 	ADIS16203_SCAN_SUPPLY,
 	ADIS16203_SCAN_AUX_ADC,
@@ -85,6 +84,7 @@ enum adis16203_scan {
 	ADIS16203_SCAN_INCLI_Y,
 };
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16203_remove_trigger(struct iio_dev *indio_dev);
 int adis16203_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index 5310a429768..1690c0d1569 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -84,7 +84,6 @@ struct adis16204_state {
 
 int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 enum adis16204_scan {
 	ADIS16204_SCAN_SUPPLY,
 	ADIS16204_SCAN_ACC_X,
@@ -93,6 +92,7 @@ enum adis16204_scan {
 	ADIS16204_SCAN_TEMP,
 };
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16204_remove_trigger(struct iio_dev *indio_dev);
 int adis16204_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 58d08db6f9b..3153cbee095 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -121,8 +121,6 @@ struct adis16209_state {
 
 int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
-
 #define ADIS16209_SCAN_SUPPLY	0
 #define ADIS16209_SCAN_ACC_X	1
 #define ADIS16209_SCAN_ACC_Y	2
@@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16209_SCAN_INCLI_Y	6
 #define ADIS16209_SCAN_ROT	7
 
+#ifdef CONFIG_IIO_RING_BUFFER
+
 void adis16209_remove_trigger(struct iio_dev *indio_dev);
 int adis16209_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index 702dc982f62..24bf70e4b29 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -104,7 +104,6 @@ struct adis16260_state {
 
 int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
@@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16260_SCAN_TEMP	3
 #define ADIS16260_SCAN_ANGL	4
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16260_remove_trigger(struct iio_dev *indio_dev);
 int adis16260_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index db184d11dfc..e87715b9acc 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -158,7 +158,6 @@ struct adis16400_state {
 
 int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
@@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16300_SCAN_INCLI_X	12
 #define ADIS16300_SCAN_INCLI_Y	13
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16400_remove_trigger(struct iio_dev *indio_dev);
 int adis16400_probe_trigger(struct iio_dev *indio_dev);
 
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
index 4039eda2a15..4a9e563f40f 100644
--- a/drivers/staging/lirc/lirc_imon.c
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context,
 static void usb_rx_callback(struct urb *urb)
 {
 	struct imon_context *context;
-	unsigned char *buf;
-	int len;
 	int intfnum = 0;
 
 	if (!urb)
@@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb)
 	if (!context)
 		return;
 
-	buf = urb->transfer_buffer;
-	len = urb->actual_length;
-
 	switch (urb->status) {
 	case -ENOENT:		/* usbcore unlink successful! */
 		return;
@@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface,
 	int ir_ep_found = 0;
 	int alloc_status = 0;
 	int vfd_proto_6p = 0;
-	int code_length;
 	struct imon_context *context = NULL;
 	int i;
 	u16 vendor, product;
@@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface,
 	else
 		context->display = 1;
 
-	code_length = BUF_CHUNK_SIZE * 8;
-
 	usbdev     = usb_get_dev(interface_to_usbdev(interface));
 	iface_desc = interface->cur_altsetting;
 	num_endpts = iface_desc->desc.bNumEndpoints;
@@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	strcpy(driver->name, MOD_NAME);
 	driver->minor = -1;
-	driver->code_length = sizeof(int) * 8;
+	driver->code_length = BUF_CHUNK_SIZE * 8;
 	driver->sample_rate = 0;
 	driver->features = LIRC_CAN_REC_MODE2;
 	driver->data = context;
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
index 4a3cca03224..805df913bb6 100644
--- a/drivers/staging/lirc/lirc_serial.c
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -838,7 +838,23 @@ static int hardware_init_port(void)
 
 static int init_port(void)
 {
-	int i, nlow, nhigh;
+	int i, nlow, nhigh, result;
+
+	result = request_irq(irq, irq_handler,
+			     IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+			     LIRC_DRIVER_NAME, (void *)&hardware);
+
+	switch (result) {
+	case -EBUSY:
+		printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+		return -EBUSY;
+	case -EINVAL:
+		printk(KERN_ERR LIRC_DRIVER_NAME
+		       ": Bad irq number or handler\n");
+		return -EINVAL;
+	default:
+		break;
+	};
 
 	/* Reserve io region. */
 	/*
@@ -893,34 +909,17 @@ static int init_port(void)
 		printk(KERN_INFO LIRC_DRIVER_NAME  ": Manually using active "
 		       "%s receiver\n", sense ? "low" : "high");
 
+	dprintk("Interrupt %d, port %04x obtained\n", irq, io);
 	return 0;
 }
 
 static int set_use_inc(void *data)
 {
-	int result;
 	unsigned long flags;
 
 	/* initialize timestamp */
 	do_gettimeofday(&lasttv);
 
-	result = request_irq(irq, irq_handler,
-			     IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
-			     LIRC_DRIVER_NAME, (void *)&hardware);
-
-	switch (result) {
-	case -EBUSY:
-		printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
-		return -EBUSY;
-	case -EINVAL:
-		printk(KERN_ERR LIRC_DRIVER_NAME
-		       ": Bad irq number or handler\n");
-		return -EINVAL;
-	default:
-		dprintk("Interrupt %d, port %04x obtained\n", irq, io);
-		break;
-	}
-
 	spin_lock_irqsave(&hardware[type].lock, flags);
 
 	/* Set DLAB 0. */
@@ -945,10 +944,6 @@ static void set_use_dec(void *data)
 	soutp(UART_IER, sinp(UART_IER) &
 	      (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
 	spin_unlock_irqrestore(&hardware[type].lock, flags);
-
-	free_irq(irq, (void *)&hardware);
-
-	dprintk("freed IRQ %d\n", irq);
 }
 
 static ssize_t lirc_write(struct file *file, const char *buf,
@@ -1256,6 +1251,9 @@ exit_serial_exit:
 static void __exit lirc_serial_exit_module(void)
 {
 	lirc_serial_exit();
+
+	free_irq(irq, (void *)&hardware);
+
 	if (iommap != 0)
 		release_mem_region(iommap, 8 << ioshift);
 	else
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
index a7b46f24f24..0d3864594b1 100644
--- a/drivers/staging/lirc/lirc_sir.c
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -739,23 +739,16 @@ static void send_space(unsigned long len)
 static void send_pulse(unsigned long len)
 {
 	long bytes_out = len / TIME_CONST;
-	long time_left;
 
-	time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
-	if (bytes_out == 0) {
+	if (bytes_out == 0)
 		bytes_out++;
-		time_left = 0;
-	}
+
 	while (bytes_out--) {
 		outb(PULSE, io + UART_TX);
 		/* FIXME treba seriozne cakanie z char/serial.c */
 		while (!(inb(io + UART_LSR) & UART_LSR_THRE))
 			;
 	}
-#if 0
-	if (time_left > 0)
-		safe_udelay(time_left);
-#endif
 }
 #endif
 
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index dd6a57c3c3a..4e051f6b52d 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -475,14 +475,14 @@ static int lirc_thread(void *arg)
 	dprintk("poll thread started\n");
 
 	while (!kthread_should_stop()) {
+		set_current_state(TASK_INTERRUPTIBLE);
+
 		/* if device not opened, we can sleep half a second */
 		if (atomic_read(&ir->open_count) == 0) {
 			schedule_timeout(HZ/2);
 			continue;
 		}
 
-		set_current_state(TASK_INTERRUPTIBLE);
-
 		/*
 		 * This is ~113*2 + 24 + jitter (2*repeat gap + code length).
 		 * We use this interval as the chip resets every time you poll
diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c
index d1ffa32cd14..685fcf63964 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/staging/mei/init.c
@@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev)
 		mutex_lock(&dev->device_lock);
 	}
 
-	if (!err && !dev->recvd_msg) {
+	if (err <= 0 && !dev->recvd_msg) {
 		dev->mei_state = MEI_DISABLED;
 		dev_dbg(&dev->pdev->dev,
 			"wait_event_interruptible_timeout failed"
diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c
index 2564b038636..fff53d0b5c6 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/staging/mei/wd.c
@@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 	ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
 					dev->wd_stopped, 10 * HZ);
 	mutex_lock(&dev->device_lock);
-	if (!dev->wd_stopped)
-		dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
-	else
-		dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
+	if (dev->wd_stopped) {
+		dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+		ret = 0;
+	} else {
+		if (!ret)
+			ret = -ETIMEDOUT;
+		dev_warn(&dev->pdev->dev,
+			"stop wd failed to complete ret=%d.\n", ret);
+	}
 
 	if (preserve)
 		dev->wd_timeout = wd_timeout;