Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 41 insertions, 16 deletions

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5c8e3bba6c8..5847a4b855f 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -36,6 +36,7 @@
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -44,6 +45,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
+#define PXA_NAME_LEN		8
+
 struct uart_pxa_port {
 	struct uart_port        port;
 	unsigned char           ier;
@@ -51,7 +54,7 @@ struct uart_pxa_port {
 	unsigned char           mcr;
 	unsigned int            lsr_break_flag;
 	struct clk		*clk;
-	char			*name;
+	char			name[PXA_NAME_LEN];
 };
 
 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
@@ -579,9 +582,9 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
 
 	if (!state)
-		clk_enable(up->clk);
+		clk_prepare_enable(up->clk);
 	else
-		clk_disable(up->clk);
+		clk_disable_unprepare(up->clk);
 }
 
 static void serial_pxa_release_port(struct uart_port *port)
@@ -668,7 +671,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 	struct uart_pxa_port *up = serial_pxa_ports[co->index];
 	unsigned int ier;
 
-	clk_enable(up->clk);
+	clk_prepare_enable(up->clk);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -685,7 +688,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 	wait_for_xmitr(up);
 	serial_out(up, UART_IER, ier);
 
-	clk_disable(up->clk);
+	clk_disable_unprepare(up->clk);
 }
 
 static int __init
@@ -781,6 +784,31 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
 };
 #endif
 
+static struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+	return 0;
+}
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -808,20 +836,16 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.irq = irqres->start;
 	sport->port.fifosize = 64;
 	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	switch (dev->id) {
-	case 0: sport->name = "FFUART"; break;
-	case 1: sport->name = "BTUART"; break;
-	case 2: sport->name = "STUART"; break;
-	case 3: sport->name = "HWUART"; break;
-	default:
-		sport->name = "???";
-		break;
-	}
+	ret = serial_pxa_probe_dt(dev, sport);
+	if (ret > 0)
+		sport->port.line = dev->id;
+	else if (ret < 0)
+		goto err_clk;
+	snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
 
 	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!sport->port.membase) {
@@ -829,7 +853,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	}
 
-	serial_pxa_ports[dev->id] = sport;
+	serial_pxa_ports[sport->port.line] = sport;
 
 	uart_add_one_port(&serial_pxa_reg, &sport->port);
 	platform_set_drvdata(dev, sport);
@@ -866,6 +890,7 @@ static struct platform_driver serial_pxa_driver = {
 #ifdef CONFIG_PM
 		.pm	= &serial_pxa_pm_ops,
 #endif
+		.of_match_table = serial_pxa_dt_ids,
 	},
 };