summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/pxa.c
diff options
context:
space:
mode:
authorDenis V. Lunev <den@openvz.org>2012-10-21 12:00:30 +0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-10-24 11:38:28 -0700
commite1a9c17969f0aa60cb00f1f777b33a07f4e84883 (patch)
tree9a9b9308c1fcf1d482ceed19a9ed5513980221fd /drivers/tty/serial/pxa.c
parentc97399418a25b18943c9910fb28e0ee5ecc3c316 (diff)
tty: serial: KGDB support for PXA
Actually, in order to support KGDB over serial console one must implement two callbacks for character polling. Clone them from 8250 driver with a bit of tuning. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Marko Katic <dromede@gmail.com> CC: Eric Miao <eric.y.miao@gmail.com> CC: Russell King <linux@arm.linux.org.uk> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> drivers/tty/serial/pxa.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 55 insertions(+), 0 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/pxa.c')
-rw-r--r--drivers/tty/serial/pxa.c55
1 files changed, 55 insertions, 0 deletions
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 9033fc6e0e4..2764828251f 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -705,6 +705,57 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
clk_disable_unprepare(up->clk);
}
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_pxa_get_poll_char(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char lsr = serial_in(up, UART_LSR);
+
+ while (!(lsr & UART_LSR_DR))
+ lsr = serial_in(up, UART_LSR);
+
+ return serial_in(up, UART_RX);
+}
+
+
+static void serial_pxa_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, UART_IER_UUE);
+
+ wait_for_xmitr(up);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, c);
+ if (c == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int __init
serial_pxa_console_setup(struct console *co, char *options)
{
@@ -759,6 +810,10 @@ struct uart_ops serial_pxa_pops = {
.request_port = serial_pxa_request_port,
.config_port = serial_pxa_config_port,
.verify_port = serial_pxa_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial_pxa_get_poll_char,
+ .poll_put_char = serial_pxa_put_poll_char,
+#endif
};
static struct uart_driver serial_pxa_reg = {