summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 23:09:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-07-25 23:09:27 -0700
commitd5ef642355bdd9b383ff5c18cbc6102a06eecbaf (patch)
treefcf78d33c1790c6c24efbfd0c3695f7874f053d7 /drivers/tty/serial
parentf549953c15deab4c54708b39af86d4edecc6cddc (diff)
parentdef90f4239f094f3846c108c1c41a4cd55c33e8e (diff)
Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits) amba pl011: workaround for uart registers lockup n_gsm: fix the wrong FCS handling pch_uart: add missing comment about OKI ML7223 pch_uart: Add MSI support tty: fix "IRQ45: nobody cared" PTI feature to allow user to name and mark masterchannel request. 0 for o PTI Makefile bug. tty: serial: samsung.c remove legacy PM code. SERIAL: SC26xx: Fix link error. serial: mrst_max3110: initialize waitqueue earlier mrst_max3110: Change max missing message priority. tty: s5pv210: Add delay loop on fifo reset function for UART tty/serial: Fix XSCALE serial ports, e.g. ce4100 serial: bfin_5xx: fix off-by-one with resource size drivers/tty: use printk_ratelimited() instead of printk_ratelimit() tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs tty: n_gsm: Add raw-ip support tty: n_gsm: expose gsmtty device nodes at ldisc open time pch_phub: Fix register miss-setting issue serial: 8250, increase PASS_LIMIT ...
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250.c4
-rw-r--r--drivers/tty/serial/8250_pci.c183
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/pch_uart.c11
-rw-r--r--drivers/tty/serial/s5pv210.c4
-rw-r--r--drivers/tty/serial/samsung.c27
6 files changed, 211 insertions, 20 deletions
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b4129f53fb1..f2dfec82faf 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -81,7 +81,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
#define DEBUG_INTR(fmt...) do { } while (0)
#endif
-#define PASS_LIMIT 256
+#define PASS_LIMIT 512
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -1107,7 +1107,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
*/
DEBUG_AUTOCONF("Xscale ");
up->port.type = PORT_XSCALE;
- up->capabilities |= UART_CAP_UUE;
+ up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
return;
}
} else {
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index cf35e0dc508..6b887d90a20 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -39,6 +39,7 @@ struct pci_serial_quirk {
u32 device;
u32 subvendor;
u32 subdevice;
+ int (*probe)(struct pci_dev *dev);
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *,
const struct pciserial_board *,
@@ -56,6 +57,9 @@ struct serial_private {
int line[0];
};
+static int pci_default_setup(struct serial_private*,
+ const struct pciserial_board*, struct uart_port*, int);
+
static void moan_device(const char *str, struct pci_dev *dev)
{
printk(KERN_WARNING
@@ -571,6 +575,28 @@ static const struct timedia_struct {
{ 8, timedia_eight_port }
};
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+ /*
+ * Check the third digit of the subdevice ID
+ * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+ */
+ if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+ dev_info(&dev->dev,
+ "ignoring Timedia subdevice %04x for parport_serial\n",
+ dev->subsystem_device);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int pci_timedia_init(struct pci_dev *dev)
{
const unsigned short *ids;
@@ -752,6 +778,62 @@ pci_ni8430_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_netmos_9900_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar;
+
+ if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ /* netmos apparently orders BARs by datasheet layout, so serial
+ * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+ */
+ bar = 3 * idx;
+
+ return setup_port(priv, port, bar, 0, board->reg_shift);
+ } else {
+ return pci_default_setup(priv, board, port, idx);
+ }
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ * (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+ unsigned int c = dev->class;
+ unsigned int pi;
+ unsigned short sub_serports;
+
+ pi = (c & 0xff);
+
+ if (pi == 2) {
+ return 1;
+ } else if ((pi == 0) &&
+ (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+ /* two possibilities: 0x30ps encodes number of parallel and
+ * serial ports, or 0x1000 indicates *something*. This is not
+ * immediately obvious, since the 2s1p+4s configuration seems
+ * to offer all functionality on functions 0..2, while still
+ * advertising the same function 3 as the 4s+2s1p config.
+ */
+ sub_serports = dev->subsystem_device & 0xf;
+ if (sub_serports > 0) {
+ return sub_serports;
+ } else {
+ printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ return 0;
+ }
+ }
+
+ moan_device("unknown NetMos/Mostech program interface", dev);
+ return 0;
+}
static int pci_netmos_init(struct pci_dev *dev)
{
@@ -761,12 +843,28 @@ static int pci_netmos_init(struct pci_dev *dev)
if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
(dev->device == PCI_DEVICE_ID_NETMOS_9865))
return 0;
+
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
+ switch (dev->device) { /* FALLTHROUGH on all */
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
+
+ default:
+ if (num_serial == 0 ) {
+ moan_device("unknown NetMos/Mostech device", dev);
+ }
+ }
+
if (num_serial == 0)
return -ENODEV;
+
return num_serial;
}
@@ -1396,6 +1494,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.device = PCI_DEVICE_ID_TIMEDIA_1889,
.subvendor = PCI_VENDOR_ID_TIMEDIA,
.subdevice = PCI_ANY_ID,
+ .probe = pci_timedia_probe,
.init = pci_timedia_init,
.setup = pci_timedia_setup,
},
@@ -1426,7 +1525,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_netmos_init,
- .setup = pci_default_setup,
+ .setup = pci_netmos_9900_setup,
},
/*
* For Oxford Semiconductor Tornado based devices
@@ -1703,6 +1802,7 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_omegapci,
+ pbn_NETMOS9900_2s_115200,
};
/*
@@ -2404,6 +2504,11 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 115200,
.uart_offset = 0x200,
},
+ [pbn_NETMOS9900_2s_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
@@ -2640,11 +2745,19 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports);
static int __devinit
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
+ struct pci_serial_quirk *quirk;
struct serial_private *priv;
const struct pciserial_board *board;
struct pciserial_board tmp;
int rc;
+ quirk = find_quirk(dev);
+ if (quirk->probe) {
+ rc = quirk->probe(dev);
+ if (rc)
+ return rc;
+ }
+
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
ent->driver_data);
@@ -2654,6 +2767,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
board = &pci_boards[ent->driver_data];
rc = pci_enable_device(dev);
+ pci_save_state(dev);
if (rc)
return rc;
@@ -3885,6 +3999,27 @@ static struct pci_device_id serial_pci_tbl[] = {
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
+ /* the 9901 is a rebranded 9912 */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x3002,
+ 0, 0, pbn_NETMOS9900_2s_115200 },
+
/*
* Best Connectivity PCI Multi I/O cards
*/
@@ -3927,6 +4062,51 @@ static struct pci_device_id serial_pci_tbl[] = {
{ 0, }
};
+static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
+ pci_channel_state_t state)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (priv)
+ pciserial_suspend_ports(priv);
+
+ pci_disable_device(dev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
+{
+ int rc;
+
+ rc = pci_enable_device(dev);
+
+ if (rc)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ pci_restore_state(dev);
+ pci_save_state(dev);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void serial8250_io_resume(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv)
+ pciserial_resume_ports(priv);
+}
+
+static struct pci_error_handlers serial8250_err_handler = {
+ .error_detected = serial8250_io_error_detected,
+ .slot_reset = serial8250_io_slot_reset,
+ .resume = serial8250_io_resume,
+};
+
static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
@@ -3936,6 +4116,7 @@ static struct pci_driver serial_pci_driver = {
.resume = pciserial_resume_one,
#endif
.id_table = serial_pci_tbl,
+ .err_handler = &serial8250_err_handler,
};
static int __init serial8250_pci_init(void)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8f41e112346..cb40b82daf3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1404,7 +1404,7 @@ config SERIAL_SC26XX
config SERIAL_SC26XX_CONSOLE
bool "Console on SC2681/SC2692 serial port"
- depends on SERIAL_SC26XX
+ depends on SERIAL_SC26XX=y
select SERIAL_CORE_CONSOLE
help
Support for Console on SC2681/SC2692 serial ports.
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 46521093089..846dfcd3ce0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -14,6 +14,7 @@
*along with this program; if not, write to the Free Software
*Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/kernel.h>
#include <linux/serial_reg.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -44,6 +45,7 @@ enum {
/* Set the max number of UART port
* Intel EG20T PCH: 4 port
* OKI SEMICONDUCTOR ML7213 IOH: 3 port
+ * OKI SEMICONDUCTOR ML7223 IOH: 2 port
*/
#define PCH_UART_NR 4
@@ -137,8 +139,6 @@ enum {
#define PCH_UART_DLL 0x00
#define PCH_UART_DLM 0x01
-#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b))
-
#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
@@ -316,7 +316,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
unsigned int dll, dlm, lcr;
int div;
- div = DIV_ROUND(priv->base_baud / 16, baud);
+ div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
if (div < 0 || USHRT_MAX <= div) {
dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
return -EINVAL;
@@ -1429,6 +1429,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
goto init_port_hal_free;
}
+ pci_enable_msi(pdev);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
@@ -1485,6 +1487,8 @@ static void pch_uart_pci_remove(struct pci_dev *pdev)
struct eg20t_port *priv;
priv = (struct eg20t_port *)pci_get_drvdata(pdev);
+
+ pci_disable_msi(pdev);
pch_uart_exit_port(priv);
pci_disable_device(pdev);
kfree(priv);
@@ -1568,6 +1572,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
return ret;
probe_disable_device:
+ pci_disable_msi(pdev);
pci_disable_device(pdev);
probe_error:
return ret;
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index 8dd160c96e8..8b0b888a1b7 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/delay.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -83,6 +84,9 @@ static int s5pv210_serial_resetport(struct uart_port *port,
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+ /* It is need to delay When reset FIFO register */
+ udelay(1);
+
return 0;
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7ead42104c6..afc62942315 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1194,12 +1194,10 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
/* UART power management code */
-
-#ifdef CONFIG_PM
-
-static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_serial_suspend(struct device *dev)
{
- struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
if (port)
uart_suspend_port(&s3c24xx_uart_drv, port);
@@ -1207,9 +1205,9 @@ static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t stat
return 0;
}
-static int s3c24xx_serial_resume(struct platform_device *dev)
+static int s3c24xx_serial_resume(struct device *dev)
{
- struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
@@ -1222,17 +1220,20 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
return 0;
}
-#endif
+
+static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
+ .suspend = s3c24xx_serial_suspend,
+ .resume = s3c24xx_serial_resume,
+};
+#else /* !CONFIG_PM_SLEEP */
+#define s3c24xx_serial_pm_ops NULL
+#endif /* CONFIG_PM_SLEEP */
int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info)
{
dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
-#ifdef CONFIG_PM
- drv->suspend = s3c24xx_serial_suspend;
- drv->resume = s3c24xx_serial_resume;
-#endif
+ drv->driver.pm = &s3c24xx_serial_pm_ops;
return platform_driver_register(drv);
}