diff options
| author | John Ogness <john.ogness@linutronix.de> | 2014-12-09 17:43:10 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-01-12 05:04:13 -0800 |
| commit | fbc4a8a85777e065f7a195ddc58b3245808f1e87 (patch) | |
| tree | 8bacc3572b40cb97e6cc1c5295a01d9021ad0c93 /drivers/uio/Kconfig | |
| parent | 02b03846bb2befc558bfd0665749d6bb26f4c2f1 (diff) | |
uio: uio_fsl_elbc_gpcm: new driver
This driver provides UIO access to memory of a peripheral connected
to the Freescale enhanced local bus controller (eLBC) interface
using the general purpose chip-select mode (GPCM).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/uio/Kconfig')
| -rw-r--r-- | drivers/uio/Kconfig | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 5a90914d856..8a15c323c03 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -104,6 +104,26 @@ config UIO_NETX To compile this driver as a module, choose M here; the module will be called uio_netx. +config UIO_FSL_ELBC_GPCM + tristate "eLBC/GPCM driver" + depends on FSL_LBC + help + Generic driver for accessing a peripheral connected to an eLBC port + that is running in GPCM mode. GPCM is an interface for simple lower + performance memories and memory-mapped devices. For devices using + FCM or UPM eLBC modes, other device-specific drivers are available. + +config UIO_FSL_ELBC_GPCM_NETX5152 + bool "eLBC/GPCM netX 51/52 support" + depends on UIO_FSL_ELBC_GPCM + help + This will add support for netX 51/52 devices connected via eLBC/GPCM. + In particular, it implements interrupt handling. This can be used + together with the userspace netX stack from Hilscher. + + Information about this hardware can be found at: + http://www.hilscher.com/netx + config UIO_PRUSS tristate "Texas Instruments PRUSS driver" depends on ARCH_DAVINCI_DA850 |