Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 162 insertions, 50 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 265c2f675d0..28664eb7f55 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -62,6 +62,8 @@ struct usb_hub {
 							resumed */
 	unsigned long		removed_bits[1]; /* ports with a "removed"
 							device present */
+	unsigned long		wakeup_bits[1];	/* ports that have signaled
+							remote wakeup */
 #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
 #error event_bits[] is too short!
 #endif
@@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev)
 		kick_khubd(hub);
 }
 
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum)
+{
+	struct usb_hub *hub;
+
+	if (!hdev)
+		return;
+
+	hub = hdev_to_hub(hdev);
+	if (hub) {
+		set_bit(portnum, hub->wakeup_bits);
+		kick_khubd(hub);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
 
 /* completion function, fires on port status changes and various faults */
 static void hub_irq(struct urb *urb)
@@ -823,12 +848,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
 		}
-		if (portchange & USB_PORT_STAT_C_LINK_STATE) {
-			need_debounce_delay = true;
-			clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
-		}
-
 		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
 				hub_is_superspeed(hub->hdev)) {
 			need_debounce_delay = true;
@@ -850,12 +869,19 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				set_bit(port1, hub->change_bits);
 
 		} else if (portstatus & USB_PORT_STAT_ENABLE) {
+			bool port_resumed = (portstatus &
+					USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_U0;
 			/* The power session apparently survived the resume.
 			 * If there was an overcurrent or suspend change
 			 * (i.e., remote wakeup request), have khubd
-			 * take care of it.
+			 * take care of it.  Look at the port link state
+			 * for USB 3.0 hubs, since they don't have a suspend
+			 * change bit, and they don't set the port link change
+			 * bit on device-initiated resume.
 			 */
-			if (portchange)
+			if (portchange || (hub_is_superspeed(hub->hdev) &&
+						port_resumed))
 				set_bit(port1, hub->change_bits);
 
 		} else if (udev->persist_enabled) {
@@ -1021,8 +1047,10 @@ static int hub_configure(struct usb_hub *hub,
 	dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
 		(hdev->maxchild == 1) ? "" : "s");
 
+	hdev->children = kzalloc(hdev->maxchild *
+				sizeof(struct usb_device *), GFP_KERNEL);
 	hub->port_owners = kzalloc(hdev->maxchild * sizeof(void *), GFP_KERNEL);
-	if (!hub->port_owners) {
+	if (!hdev->children || !hub->port_owners) {
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -1253,7 +1281,8 @@ static unsigned highspeed_hubs;
 
 static void hub_disconnect(struct usb_interface *intf)
 {
-	struct usb_hub *hub = usb_get_intfdata (intf);
+	struct usb_hub *hub = usb_get_intfdata(intf);
+	struct usb_device *hdev = interface_to_usbdev(intf);
 
 	/* Take the hub off the event list and don't let it be added again */
 	spin_lock_irq(&hub_event_lock);
@@ -1275,6 +1304,7 @@ static void hub_disconnect(struct usb_interface *intf)
 		highspeed_hubs--;
 
 	usb_free_urb(hub->urb);
+	kfree(hdev->children);
 	kfree(hub->port_owners);
 	kfree(hub->descriptor);
 	kfree(hub->status);
@@ -1293,14 +1323,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
-	/* Hubs have proper suspend/resume support.  USB 3.0 device suspend is
-	 * different from USB 2.0/1.1 device suspend, and unfortunately we
-	 * don't support it yet.  So leave autosuspend disabled for USB 3.0
-	 * external hubs for now.  Enable autosuspend for USB 3.0 roothubs,
-	 * since that isn't a "real" hub.
-	 */
-	if (!hub_is_superspeed(hdev) || !hdev->parent)
-		usb_enable_autosuspend(hdev);
+	/* Hubs have proper suspend/resume support. */
+	usb_enable_autosuspend(hdev);
 
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
@@ -1656,7 +1680,7 @@ void usb_disconnect(struct usb_device **pdev)
 	usb_lock_device(udev);
 
 	/* Free up all the children before we remove this device */
-	for (i = 0; i < USB_MAXCHILDREN; i++) {
+	for (i = 0; i < udev->maxchild; i++) {
 		if (udev->children[i])
 			usb_disconnect(&udev->children[i]);
 	}
@@ -1842,6 +1866,37 @@ fail:
 	return err;
 }
 
+static void set_usb_port_removable(struct usb_device *udev)
+{
+	struct usb_device *hdev = udev->parent;
+	struct usb_hub *hub;
+	u8 port = udev->portnum;
+	u16 wHubCharacteristics;
+	bool removable = true;
+
+	if (!hdev)
+		return;
+
+	hub = hdev_to_hub(udev->parent);
+
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+	if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+		return;
+
+	if (hub_is_superspeed(hdev)) {
+		if (hub->descriptor->u.ss.DeviceRemovable & (1 << port))
+			removable = false;
+	} else {
+		if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+			removable = false;
+	}
+
+	if (removable)
+		udev->removable = USB_DEVICE_REMOVABLE;
+	else
+		udev->removable = USB_DEVICE_FIXED;
+}
 
 /**
  * usb_new_device - perform initial device setup (usbcore-internal)
@@ -1900,6 +1955,15 @@ int usb_new_device(struct usb_device *udev)
 	announce_device(udev);
 
 	device_enable_async_suspend(&udev->dev);
+
+	/*
+	 * check whether the hub marks this port as non-removable. Do it
+	 * now so that platform-specific data can override it in
+	 * device_add()
+	 */
+	if (udev->parent)
+		set_usb_port_removable(udev);
+
 	/* Register the device.  The device driver is responsible
 	 * for configuring the device and invoking the add-device
 	 * notifier chain (used by usbfs and possibly others).
@@ -2385,11 +2449,27 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	 * we don't explicitly enable it here.
 	 */
 	if (udev->do_remote_wakeup) {
-		status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0,
-				NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		if (!hub_is_superspeed(hub->hdev)) {
+			status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+					USB_DEVICE_REMOTE_WAKEUP, 0,
+					NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+		} else {
+			/* Assume there's only one function on the USB 3.0
+			 * device and enable remote wake for the first
+			 * interface. FIXME if the interface association
+			 * descriptor shows there's more than one function.
+			 */
+			status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE,
+					USB_RECIP_INTERFACE,
+					USB_INTRF_FUNC_SUSPEND,
+					USB_INTRF_FUNC_SUSPEND_RW |
+					USB_INTRF_FUNC_SUSPEND_LP,
+					NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+		}
 		if (status) {
 			dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
 					status);
@@ -2679,6 +2759,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	struct usb_hub		*hub = usb_get_intfdata (intf);
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
+	int			status;
 
 	/* Warn if children aren't already suspended */
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -2691,6 +2772,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 				return -EBUSY;
 		}
 	}
+	if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+		/* Enable hub to send remote wakeup for all ports. */
+		for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+			status = set_port_feature(hdev,
+					port1 |
+					USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+					USB_PORT_FEAT_REMOTE_WAKE_MASK);
+		}
+	}
 
 	dev_dbg(&intf->dev, "%s\n", __func__);
 
@@ -3424,6 +3516,46 @@ done:
 		hcd->driver->relinquish_port(hcd, port1);
 }
 
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+{
+	struct usb_device *hdev;
+	struct usb_device *udev;
+	int connect_change = 0;
+	int ret;
+
+	hdev = hub->hdev;
+	udev = hdev->children[port-1];
+	if (!hub_is_superspeed(hdev)) {
+		if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+			return 0;
+		clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+	} else {
+		if (!udev || udev->state != USB_STATE_SUSPENDED ||
+				 (portstatus & USB_PORT_STAT_LINK_STATE) !=
+				 USB_SS_PORT_LS_U0)
+			return 0;
+	}
+
+	if (udev) {
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+
+		usb_lock_device(udev);
+		ret = usb_remote_wakeup(udev);
+		usb_unlock_device(udev);
+		if (ret < 0)
+			connect_change = 1;
+	} else {
+		ret = -ENODEV;
+		hub_port_disable(hub, port, 1);
+	}
+	dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
+			port, ret);
+	return connect_change;
+}
+
 static void hub_events(void)
 {
 	struct list_head *tmp;
@@ -3436,7 +3568,7 @@ static void hub_events(void)
 	u16 portstatus;
 	u16 portchange;
 	int i, ret;
-	int connect_change;
+	int connect_change, wakeup_change;
 
 	/*
 	 *  We restart the list every time to avoid a deadlock with
@@ -3515,8 +3647,9 @@ static void hub_events(void)
 			if (test_bit(i, hub->busy_bits))
 				continue;
 			connect_change = test_bit(i, hub->change_bits);
+			wakeup_change = test_and_clear_bit(i, hub->wakeup_bits);
 			if (!test_and_clear_bit(i, hub->event_bits) &&
-					!connect_change)
+					!connect_change && !wakeup_change)
 				continue;
 
 			ret = hub_port_status(hub, i,
@@ -3557,31 +3690,10 @@ static void hub_events(void)
 				}
 			}
 
-			if (portchange & USB_PORT_STAT_C_SUSPEND) {
-				struct usb_device *udev;
+			if (hub_handle_remote_wakeup(hub, i,
+						portstatus, portchange))
+				connect_change = 1;
 
-				clear_port_feature(hdev, i,
-					USB_PORT_FEAT_C_SUSPEND);
-				udev = hdev->children[i-1];
-				if (udev) {
-					/* TRSMRCY = 10 msec */
-					msleep(10);
-
-					usb_lock_device(udev);
-					ret = usb_remote_wakeup(hdev->
-							children[i-1]);
-					usb_unlock_device(udev);
-					if (ret < 0)
-						connect_change = 1;
-				} else {
-					ret = -ENODEV;
-					hub_port_disable(hub, i, 1);
-				}
-				dev_dbg (hub_dev,
-					"resume on port %d, status %d\n",
-					i, ret);
-			}
-			
 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
 				u16 status = 0;
 				u16 unused;