Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used.  The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
	drivers/base/regmap/regmap.c (overlap between the fix and stride code)

6 files changed, 65 insertions, 13 deletions

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5..9a56635dc19 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
-		/* Again, ignore errors during system sleep transitions */
-		if (!PMSG_IS_AUTO(msg))
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
 			status = 0;
 	}
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a48e73..57ed9e400c0 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
+	/*
+	 * Some systems crash if an EHCI controller is in D3 during
+	 * a sleep transition.  We have to leave such controllers in D0.
+	 */
+	if (hcd->broken_pci_sleep) {
+		dev_dbg(dev, "Staying in PCI D0\n");
+		return retval;
+	}
+
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a3993..140d3e11f21 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 	if (status == 0) {
 		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
 		hcd->state = HC_STATE_SUSPENDED;
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
 	} else {
 		spin_lock_irq(&hcd_root_hub_lock);
 		if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f55..ec6c97dadbe 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1667,7 +1667,6 @@ void usb_disconnect(struct usb_device **pdev)
 {
 	struct usb_device	*udev = *pdev;
 	int			i;
-	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
@@ -1690,9 +1689,7 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
-	mutex_lock(hcd->bandwidth_mutex);
 	usb_disable_device(udev, 0);
-	mutex_unlock(hcd->bandwidth_mutex);
 	usb_hcd_synchronize_unlinks(udev);
 
 	usb_remove_ep_devs(&udev->ep0);
@@ -3163,6 +3160,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed == USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, "
+				"warm reset device\n");
+		hub_port_reset(hub, port1, udev,
+				HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
 	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
 			udev->speed == USB_SPEED_SUPER)
 		i = 512;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e..ca717da3be9 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
 				retval = usb_unlink_urb(io->urbs [i]);
 				if (retval != -EINPROGRESS &&
 				    retval != -ENODEV &&
-				    retval != -EBUSY)
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
 					dev_err(&io->dev->dev,
 						"%s, unlink --> %d\n",
 						__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
 		}
 		spin_lock(&io->lock);
 	}
-	urb->dev = NULL;
 
 	/* on the last completion, signal usb_sg_wait() */
 	io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
-			io->urbs[i]->dev = NULL;
 			retval = 0;
 			yield();
 			break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
 			/* fail any uncompleted urbs */
 		default:
-			io->urbs[i]->dev = NULL;
 			io->urbs[i]->status = retval;
 			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
 				__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			if (!io->urbs [i]->dev)
 				continue;
 			retval = usb_unlink_urb(io->urbs [i]);
-			if (retval != -EINPROGRESS && retval != -EBUSY)
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
 				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 					__func__, retval);
 		}
@@ -1135,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
  * Deallocates hcd/hardware state for the endpoints (nuking all or most
  * pending urbs) and usbcore state for the interfaces, so that usbcore
  * must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
  */
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
@@ -1189,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
 		}
 		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
 		/* Second pass: remove endpoint pointers */
 	}
 	for (i = skip_ep0; i < 16; ++i) {
@@ -1749,7 +1750,6 @@ free_interfaces:
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
-	mutex_lock(hcd->bandwidth_mutex);
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device(dev, 1);	/* Skip ep0 */
 
@@ -1762,6 +1762,7 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
 		mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8..cd9b3a2cd8a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * never submitted, or it was unlinked before, or the hardware is already
  * finished with it), even if the completion handler has not yet run.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * Unlinking and Endpoint Queues:
  *
  * [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().