USB: pxa27x_udc: add otg transceiver support

When a transceiver driver is used, no automatic udc enable
is done. The transceiver (OTG or not) should :
 - take care of VBus sensing
 - call usb_gadget_vbus_connect()
 - call usb_gadget_vbus_disconnect()

The pullup should remain within this driver's management,
either by gpio_pullup of udc_command() fields.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 18 insertions, 1 deletions

diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 0c9307118b5..11510472ee0 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1779,10 +1779,21 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	dev_dbg(udc->dev, "registered gadget driver '%s'\n",
 		driver->driver.name);
 
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval) {
+			dev_err(udc->dev, "can't bind to transceiver\n");
+			goto transceiver_fail;
+		}
+	}
+
 	if (should_enable_udc(udc))
 		udc_enable(udc);
 	return 0;
 
+transceiver_fail:
+	if (driver->unbind)
+		driver->unbind(&udc->gadget);
 bind_fail:
 	device_del(&udc->gadget.dev);
 add_fail:
@@ -1840,9 +1851,11 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	udc->driver = NULL;
 
 	device_del(&udc->gadget.dev);
-
 	dev_info(udc->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
+
+	if (udc->transceiver)
+		return otg_set_peripheral(udc->transceiver, NULL);
 	return 0;
 }
 EXPORT_SYMBOL(usb_gadget_unregister_driver);
@@ -2359,6 +2372,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
 	udc->dev = &pdev->dev;
 	udc->mach = pdev->dev.platform_data;
+	udc->transceiver = otg_get_transceiver();
 
 	gpio = udc->mach->gpio_pullup;
 	if (gpio_is_valid(gpio)) {
@@ -2431,6 +2445,9 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
 	if (gpio_is_valid(gpio))
 		gpio_free(gpio);
 
+	otg_put_transceiver(udc->transceiver);
+
+	udc->transceiver = NULL;
 	platform_set_drvdata(_dev, NULL);
 	the_controller = NULL;
 	clk_put(udc->clk);