Merge branch 'next' into for-linus

Prepare first round of input updates for 3.20.

1 files changed, 37 insertions, 18 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 6130b757490..118edb7bdca 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -69,10 +69,8 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 		if (test_bit(port, &ehci->owned_ports)) {
 			reg = &ehci->regs->port_status[port];
 			status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
-			if (!(status & PORT_POWER)) {
-				status |= PORT_POWER;
-				ehci_writel(ehci, status, reg);
-			}
+			if (!(status & PORT_POWER))
+				ehci_port_power(ehci, port, true);
 		}
 	}
 
@@ -656,7 +654,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 
 		/*
 		 * Return status information even for ports with OWNER set.
-		 * Otherwise khubd wouldn't see the disconnect event when a
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
 		 * high-speed device is switched over to the companion
 		 * controller by the user.
 		 */
@@ -902,7 +900,7 @@ int ehci_hub_control(
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -922,7 +920,7 @@ int ehci_hub_control(
 #ifdef CONFIG_USB_OTG
 			if ((hcd->self.otg_port == (wIndex + 1))
 			    && hcd->self.b_hnp_enable) {
-				otg_start_hnp(hcd->phy->otg);
+				otg_start_hnp(hcd->usb_phy->otg);
 				break;
 			}
 #endif
@@ -952,9 +950,11 @@ int ehci_hub_control(
 			clear_bit(wIndex, &ehci->port_c_suspend);
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (HCS_PPC (ehci->hcs_params))
-				ehci_writel(ehci, temp & ~PORT_POWER,
-						status_reg);
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 			ehci_writel(ehci, temp | PORT_CSC, status_reg);
@@ -1000,13 +1000,13 @@ int ehci_hub_control(
 			 * However, not all EHCI implementations do this
 			 * automatically, even if they _do_ support per-port
 			 * power switching; they're allowed to just limit the
-			 * current.  khubd will turn the power back on.
+			 * current.  hub_wq will turn the power back on.
 			 */
 			if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
 					&& HCS_PPC(ehci->hcs_params)) {
-				ehci_writel(ehci,
-					temp & ~(PORT_RWC_BITS | PORT_POWER),
-					status_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, false);
+				spin_lock_irqsave(&ehci->lock, flags);
 				temp = ehci_readl(ehci, status_reg);
 			}
 		}
@@ -1085,7 +1085,7 @@ int ehci_hub_control(
 		}
 
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
@@ -1187,9 +1187,11 @@ int ehci_hub_control(
 			set_bit(wIndex, &ehci->suspended_ports);
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (HCS_PPC (ehci->hcs_params))
-				ehci_writel(ehci, temp | PORT_POWER,
-						status_reg);
+			if (HCS_PPC(ehci->hcs_params)) {
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				ehci_port_power(ehci, wIndex, true);
+				spin_lock_irqsave(&ehci->lock, flags);
+			}
 			break;
 		case USB_PORT_FEAT_RESET:
 			if (temp & (PORT_SUSPEND|PORT_RESUME))
@@ -1297,3 +1299,20 @@ static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
 	reg = &ehci->regs->port_status[portnum - 1];
 	return ehci_readl(ehci, reg) & PORT_OWNER;
 }
+
+static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable)
+{
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	u32 __iomem *status_reg = &ehci->regs->port_status[portnum];
+	u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
+
+	if (enable)
+		ehci_writel(ehci, temp | PORT_POWER, status_reg);
+	else
+		ehci_writel(ehci, temp & ~PORT_POWER, status_reg);
+
+	if (hcd->driver->port_power)
+		hcd->driver->port_power(hcd, portnum, enable);
+
+	return 0;
+}