Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

1 files changed, 10 insertions, 12 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 38fe0762315..fc9e7cc6ac9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -233,7 +233,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	/* stop schedules, clean any completed work */
 	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
-	ehci->command = ehci_readl(ehci, &ehci->regs->command);
 	ehci_work(ehci);
 
 	/* Unlike other USB host controller types, EHCI doesn't have
@@ -374,6 +373,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
+	ehci->command |= CMD_RUN;
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	ehci->rh_state = EHCI_RH_RUNNING;
 
@@ -531,7 +531,8 @@ static int check_reset_complete (
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 1);
 	} else {
-		ehci_dbg (ehci, "port %d high speed\n", index + 1);
+		ehci_dbg(ehci, "port %d reset complete, port enabled\n",
+			index + 1);
 		/* ensure 440EPx ohci controller state is suspended */
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 0);
@@ -699,6 +700,7 @@ static int ehci_hub_control (
 			goto error;
 		wIndex--;
 		temp = ehci_readl(ehci, status_reg);
+		temp &= ~PORT_RWC_BITS;
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
@@ -712,8 +714,7 @@ static int ehci_hub_control (
 			ehci_writel(ehci, temp & ~PORT_PE, status_reg);
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_PEC, status_reg);
 			break;
 		case USB_PORT_FEAT_SUSPEND:
 			if (temp & PORT_RESET)
@@ -742,7 +743,7 @@ static int ehci_hub_control (
 				spin_lock_irqsave(&ehci->lock, flags);
 			}
 			/* resume signaling for 20 msec */
-			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+			temp &= ~PORT_WAKE_BITS;
 			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
 			ehci->reset_done[wIndex] = jiffies
 					+ msecs_to_jiffies(20);
@@ -752,9 +753,8 @@ static int ehci_hub_control (
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC (ehci->hcs_params))
-				ehci_writel(ehci,
-					  temp & ~(PORT_RWC_BITS | PORT_POWER),
-					  status_reg);
+				ehci_writel(ehci, temp & ~PORT_POWER,
+						status_reg);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 			if (ehci->has_lpm) {
@@ -762,12 +762,10 @@ static int ehci_hub_control (
 				temp &= ~PORT_LPM;
 				temp &= ~PORT_DEV_ADDR;
 			}
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_CSC, status_reg);
 			break;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_OCC, status_reg);
 			break;
 		case USB_PORT_FEAT_C_RESET:
 			/* GetPortStatus clears reset */