USB: EHCI: use a bandwidth-allocation table

This patch significantly changes the scheduling code in ehci-hcd.
Instead of calculating the current bandwidth utilization by trudging
through the schedule and adding up the times used by the existing
transfers, we will now maintain a table holding the time used for each
of 64 microframes.  This will drastically speed up the bandwidth
computations.

In addition, it eliminates a theoretical bug.  An isochronous endpoint
may have bandwidth reserved even at times when it has no transfers
listed in the schedule.  The table will keep track of the reserved
bandwidth, whereas adding up entries in the schedule would miss it.

As a corollary, we can keep bandwidth reserved for endpoints even
when they aren't in active use.  Eventually the bandwidth will be
reserved when a new alternate setting is installed; for now the
endpoint's reservation takes place when its first URB is submitted.

A drawback of this approach is that transfers with an interval larger
than 64 microframes will have to be charged for bandwidth as though
the interval was 64.  In practice this shouldn't matter much;
transfers with longer intervals tend to be rather short anyway (things
like hubs or HID devices).

Another minor drawback is that we will keep track of two different
period and phase values: the actual ones and the ones used for
bandwidth allocation (which are limited to 64).  This adds only a
small amount of overhead: 3 bytes for each endpoint.

The patch also adds a new debugfs file named "bandwidth" to display
the information stored in the new table.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 12 insertions, 1 deletions

diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index e2b64c40d94..12504fbded5 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -62,10 +62,16 @@ struct ehci_per_sched {
 	struct usb_device	*udev;		/* access to the TT */
 	struct usb_host_endpoint *ep;
 	u16			tt_usecs;	/* time on the FS/LS bus */
+	u16			cs_mask;	/* C-mask and S-mask bytes */
 	u16			period;		/* actual period in frames */
 	u16			phase;		/* actual phase, frame part */
+	u8			bw_phase;	/* same, for bandwidth
+						   reservation */
 	u8			phase_uf;	/* uframe part of the phase */
 	u8			usecs, c_usecs;	/* times on the HS bus */
+	u8			bw_uperiod;	/* period in microframes, for
+						   bandwidth reservation */
+	u8			bw_period;	/* same, in frames */
 };
 #define NO_FRAME	29999			/* frame not assigned yet */
 
@@ -245,6 +251,12 @@ struct ehci_hcd {			/* one per controller */
 	struct dentry		*debug_dir;
 #endif
 
+	/* bandwidth usage */
+#define EHCI_BANDWIDTH_SIZE	64
+#define EHCI_BANDWIDTH_FRAMES	(EHCI_BANDWIDTH_SIZE >> 3)
+	u8			bandwidth[EHCI_BANDWIDTH_SIZE];
+						/* us allocated per uframe */
+
 	/* platform-specific data -- must come last */
 	unsigned long		priv[0] __aligned(sizeof(s64));
 };
@@ -469,7 +481,6 @@ struct ehci_iso_stream {
 	 */
 	u16			uperiod;	/* period in uframes */
 	u16			maxp;
-	u16			raw_mask;
 	unsigned		bandwidth;
 
 	/* This is used to initialize iTD's hw_bufp fields */