Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 43 insertions, 29 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c939f5fdef9..e1963d4a430 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -224,13 +224,13 @@ static void xhci_free_irq(struct xhci_hcd *xhci)
 	int ret;
 
 	/* return if using legacy interrupt */
-	if (xhci_to_hcd(xhci)->irq >= 0)
+	if (xhci_to_hcd(xhci)->irq > 0)
 		return;
 
 	ret = xhci_free_msi(xhci);
 	if (!ret)
 		return;
-	if (pdev->irq >= 0)
+	if (pdev->irq > 0)
 		free_irq(pdev->irq, xhci_to_hcd(xhci));
 
 	return;
@@ -341,7 +341,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 	/* unregister the legacy interrupt */
 	if (hcd->irq)
 		free_irq(hcd->irq, hcd);
-	hcd->irq = -1;
+	hcd->irq = 0;
 
 	ret = xhci_setup_msix(xhci);
 	if (ret)
@@ -349,7 +349,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 		ret = xhci_setup_msi(xhci);
 
 	if (!ret)
-		/* hcd->irq is -1, we have MSI */
+		/* hcd->irq is 0, we have MSI */
 		return 0;
 
 	if (!pdev->irq) {
@@ -729,6 +729,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 	ring->enq_seg = ring->deq_seg;
 	ring->enqueue = ring->dequeue;
 
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
 	/*
 	 * Ring is now zeroed, so the HW should look for change of ownership
 	 * when the cycle bit is set to 1.
@@ -3614,26 +3615,38 @@ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
 	3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
 
 /* Calculate HIRD/BESL for USB2 PORTPMSC*/
-static int xhci_calculate_hird_besl(int u2del, bool use_besl)
+static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
+					struct usb_device *udev)
 {
-	int hird;
+	int u2del, besl, besl_host;
+	int besl_device = 0;
+	u32 field;
+
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 
-	if (use_besl) {
-		for (hird = 0; hird < 16; hird++) {
-			if (xhci_besl_encoding[hird] >= u2del)
+	if (field & USB_BESL_SUPPORT) {
+		for (besl_host = 0; besl_host < 16; besl_host++) {
+			if (xhci_besl_encoding[besl_host] >= u2del)
 				break;
 		}
+		/* Use baseline BESL value as default */
+		if (field & USB_BESL_BASELINE_VALID)
+			besl_device = USB_GET_BESL_BASELINE(field);
+		else if (field & USB_BESL_DEEP_VALID)
+			besl_device = USB_GET_BESL_DEEP(field);
 	} else {
 		if (u2del <= 50)
-			hird = 0;
+			besl_host = 0;
 		else
-			hird = (u2del - 51) / 75 + 1;
-
-		if (hird > 15)
-			hird = 15;
+			besl_host = (u2del - 51) / 75 + 1;
 	}
 
-	return hird;
+	besl = besl_host + besl_device;
+	if (besl > 15)
+		besl = 15;
+
+	return besl;
 }
 
 static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
@@ -3646,7 +3659,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
 	u32		temp, dev_id;
 	unsigned int	port_num;
 	unsigned long	flags;
-	int		u2del, hird;
+	int		hird;
 	int		ret;
 
 	if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
@@ -3692,12 +3705,7 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
 	 * HIRD or BESL shoule be used. See USB2.0 LPM errata.
 	 */
 	pm_addr = port_array[port_num] + 1;
-	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
-	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
-		hird = xhci_calculate_hird_besl(u2del, 1);
-	else
-		hird = xhci_calculate_hird_besl(u2del, 0);
-
+	hird = xhci_calculate_hird_besl(xhci, udev);
 	temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
 	xhci_writel(xhci, temp, pm_addr);
 
@@ -3776,7 +3784,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	u32		temp;
 	unsigned int	port_num;
 	unsigned long	flags;
-	int		u2del, hird;
+	int		hird;
 
 	if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
 			!udev->lpm_capable)
@@ -3799,11 +3807,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num);
 
-	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
-	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
-		hird = xhci_calculate_hird_besl(u2del, 1);
-	else
-		hird = xhci_calculate_hird_besl(u2del, 0);
+	hird = xhci_calculate_hird_besl(xhci, udev);
 
 	if (enable) {
 		temp &= ~PORT_HIRD_MASK;
@@ -3964,7 +3968,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 	int			retval;
 	u32			temp;
 
-	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
+	/* Accept arbitrarily long scatter-gather lists */
+	hcd->self.sg_tablesize = ~0;
 
 	if (usb_hcd_is_primary_hcd(hcd)) {
 		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
@@ -4059,6 +4064,11 @@ static int __init xhci_hcd_init(void)
 		printk(KERN_DEBUG "Problem registering PCI driver.");
 		return retval;
 	}
+	retval = xhci_register_plat();
+	if (retval < 0) {
+		printk(KERN_DEBUG "Problem registering platform driver.");
+		goto unreg_pci;
+	}
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.
@@ -4078,11 +4088,15 @@ static int __init xhci_hcd_init(void)
 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
 	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
 	return 0;
+unreg_pci:
+	xhci_unregister_pci();
+	return retval;
 }
 module_init(xhci_hcd_init);
 
 static void __exit xhci_hcd_cleanup(void)
 {
 	xhci_unregister_pci();
+	xhci_unregister_plat();
 }
 module_exit(xhci_hcd_cleanup);