Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.20 merge window

Here's the big pull request for Gadgets and PHYs. It's
a total of 217 non-merge commits with pretty much everything
being touched.

The most important bits are a ton of new documentation for
almost all usb gadget functions, a new isp1760 UDC driver,
several improvements to the old net2280 UDC driver, and
some minor tracepoint improvements to dwc3.

Other than that, a big list of minor cleanups, smaller bugfixes
and new features all over the place.

Signed-off-by: Felipe Balbi <balbi@ti.com>

5 files changed, 0 insertions, 2971 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 688ba86fe8f..5ad60e46dc2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -331,20 +331,6 @@ config USB_ISP116X_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called isp116x-hcd.
 
-config USB_ISP1760_HCD
-	tristate "ISP 1760 HCD support"
-	---help---
-	  The ISP1760 chip is a USB 2.0 host controller.
-
-	  This driver does not support isochronous transfers or OTG.
-	  This USB controller is usually attached to a non-DMA-Master
-	  capable bus. NXP's eval kit brings this chip on PCI card
-	  where the chip itself is behind a PLB to simulate such
-	  a bus.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called isp1760.
-
 config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
 	---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index d6216a493ba..65b0b6a5859 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -5,8 +5,6 @@
 # tell define_trace.h where to find the xhci trace header
 CFLAGS_xhci-trace.o := -I$(src)
 
-isp1760-y := isp1760-hcd.o isp1760-if.o
-
 fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
 fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
 
@@ -69,7 +67,6 @@ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
-obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
deleted file mode 100644
index cecf39a220e..00000000000
--- a/drivers/usb/host/isp1760-hcd.c
+++ /dev/null
@@ -1,2269 +0,0 @@
-/*
- * Driver for the NXP ISP1760 chip
- *
- * However, the code might contain some bugs. What doesn't work for sure is:
- * - ISO
- * - OTG
- e The interrupt line is configured as active low, level.
- *
- * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
- *
- * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <asm/unaligned.h>
-#include <asm/cacheflush.h>
-#include <linux/gpio.h>
-
-#include "isp1760-hcd.h"
-
-static struct kmem_cache *qtd_cachep;
-static struct kmem_cache *qh_cachep;
-static struct kmem_cache *urb_listitem_cachep;
-
-enum queue_head_types {
-	QH_CONTROL,
-	QH_BULK,
-	QH_INTERRUPT,
-	QH_END
-};
-
-struct isp1760_hcd {
-	u32 hcs_params;
-	spinlock_t		lock;
-	struct slotinfo		atl_slots[32];
-	int			atl_done_map;
-	struct slotinfo		int_slots[32];
-	int			int_done_map;
-	struct memory_chunk memory_pool[BLOCKS];
-	struct list_head	qh_list[QH_END];
-
-	/* periodic schedule support */
-#define	DEFAULT_I_TDPS		1024
-	unsigned		periodic_size;
-	unsigned		i_thresh;
-	unsigned long		reset_done;
-	unsigned long		next_statechange;
-	unsigned int		devflags;
-
-	int			rst_gpio;
-};
-
-static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
-{
-	return (struct isp1760_hcd *) (hcd->hcd_priv);
-}
-
-/* Section 2.2 Host Controller Capability Registers */
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-
-/* Section 2.3 Host Controller Operational Registers */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10))	/* USB 1.1 device */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC)
-
-struct isp1760_qtd {
-	u8 packet_type;
-	void *data_buffer;
-	u32 payload_addr;
-
-	/* the rest is HCD-private */
-	struct list_head qtd_list;
-	struct urb *urb;
-	size_t length;
-	size_t actual_length;
-
-	/* QTD_ENQUEUED:	waiting for transfer (inactive) */
-	/* QTD_PAYLOAD_ALLOC:	chip mem has been allocated for payload */
-	/* QTD_XFER_STARTED:	valid ptd has been written to isp176x - only
-				interrupt handler may touch this qtd! */
-	/* QTD_XFER_COMPLETE:	payload has been transferred successfully */
-	/* QTD_RETIRE:		transfer error/abort qtd */
-#define QTD_ENQUEUED		0
-#define QTD_PAYLOAD_ALLOC	1
-#define QTD_XFER_STARTED	2
-#define QTD_XFER_COMPLETE	3
-#define QTD_RETIRE		4
-	u32 status;
-};
-
-/* Queue head, one for each active endpoint */
-struct isp1760_qh {
-	struct list_head qh_list;
-	struct list_head qtd_list;
-	u32 toggle;
-	u32 ping;
-	int slot;
-	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
-};
-
-struct urb_listitem {
-	struct list_head urb_list;
-	struct urb *urb;
-};
-
-/*
- * Access functions for isp176x registers (addresses 0..0x03FF).
- */
-static u32 reg_read32(void __iomem *base, u32 reg)
-{
-	return readl(base + reg);
-}
-
-static void reg_write32(void __iomem *base, u32 reg, u32 val)
-{
-	writel(val, base + reg);
-}
-
-/*
- * Access functions for isp176x memory (offset >= 0x0400).
- *
- * bank_reads8() reads memory locations prefetched by an earlier write to
- * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
- * bank optimizations, you should use the more generic mem_reads8() below.
- *
- * For access to ptd memory, use the specialized ptd_read() and ptd_write()
- * below.
- *
- * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
- * doesn't quite work because some people have to enforce 32-bit access
- */
-static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
-							__u32 *dst, u32 bytes)
-{
-	__u32 __iomem *src;
-	u32 val;
-	__u8 *src_byteptr;
-	__u8 *dst_byteptr;
-
-	src = src_base + (bank_addr | src_offset);
-
-	if (src_offset < PAYLOAD_OFFSET) {
-		while (bytes >= 4) {
-			*dst = le32_to_cpu(__raw_readl(src));
-			bytes -= 4;
-			src++;
-			dst++;
-		}
-	} else {
-		while (bytes >= 4) {
-			*dst = __raw_readl(src);
-			bytes -= 4;
-			src++;
-			dst++;
-		}
-	}
-
-	if (!bytes)
-		return;
-
-	/* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
-	 * allocated.
-	 */
-	if (src_offset < PAYLOAD_OFFSET)
-		val = le32_to_cpu(__raw_readl(src));
-	else
-		val = __raw_readl(src);
-
-	dst_byteptr = (void *) dst;
-	src_byteptr = (void *) &val;
-	while (bytes > 0) {
-		*dst_byteptr = *src_byteptr;
-		dst_byteptr++;
-		src_byteptr++;
-		bytes--;
-	}
-}
-
-static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst,
-								u32 bytes)
-{
-	reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0));
-	ndelay(90);
-	bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes);
-}
-
-static void mem_writes8(void __iomem *dst_base, u32 dst_offset,
-						__u32 const *src, u32 bytes)
-{
-	__u32 __iomem *dst;
-
-	dst = dst_base + dst_offset;
-
-	if (dst_offset < PAYLOAD_OFFSET) {
-		while (bytes >= 4) {
-			__raw_writel(cpu_to_le32(*src), dst);
-			bytes -= 4;
-			src++;
-			dst++;
-		}
-	} else {
-		while (bytes >= 4) {
-			__raw_writel(*src, dst);
-			bytes -= 4;
-			src++;
-			dst++;
-		}
-	}
-
-	if (!bytes)
-		return;
-	/* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
-	 * extra bytes should not be read by the HW.
-	 */
-
-	if (dst_offset < PAYLOAD_OFFSET)
-		__raw_writel(cpu_to_le32(*src), dst);
-	else
-		__raw_writel(*src, dst);
-}
-
-/*
- * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
- * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
- */
-static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot,
-								struct ptd *ptd)
-{
-	reg_write32(base, HC_MEMORY_REG,
-				ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd));
-	ndelay(90);
-	bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0),
-						(void *) ptd, sizeof(*ptd));
-}
-
-static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
-								struct ptd *ptd)
-{
-	mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0),
-						&ptd->dw1, 7*sizeof(ptd->dw1));
-	/* Make sure dw0 gets written last (after other dw's and after payload)
-	   since it contains the enable bit */
-	wmb();
-	mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0,
-							sizeof(ptd->dw0));
-}
-
-
-/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
-static void init_memory(struct isp1760_hcd *priv)
-{
-	int i, curr;
-	u32 payload_addr;
-
-	payload_addr = PAYLOAD_OFFSET;
-	for (i = 0; i < BLOCK_1_NUM; i++) {
-		priv->memory_pool[i].start = payload_addr;
-		priv->memory_pool[i].size = BLOCK_1_SIZE;
-		priv->memory_pool[i].free = 1;
-		payload_addr += priv->memory_pool[i].size;
-	}
-
-	curr = i;
-	for (i = 0; i < BLOCK_2_NUM; i++) {
-		priv->memory_pool[curr + i].start = payload_addr;
-		priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
-		priv->memory_pool[curr + i].free = 1;
-		payload_addr += priv->memory_pool[curr + i].size;
-	}
-
-	curr = i;
-	for (i = 0; i < BLOCK_3_NUM; i++) {
-		priv->memory_pool[curr + i].start = payload_addr;
-		priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
-		priv->memory_pool[curr + i].free = 1;
-		payload_addr += priv->memory_pool[curr + i].size;
-	}
-
-	WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
-}
-
-static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int i;
-
-	WARN_ON(qtd->payload_addr);
-
-	if (!qtd->length)
-		return;
-
-	for (i = 0; i < BLOCKS; i++) {
-		if (priv->memory_pool[i].size >= qtd->length &&
-				priv->memory_pool[i].free) {
-			priv->memory_pool[i].free = 0;
-			qtd->payload_addr = priv->memory_pool[i].start;
-			return;
-		}
-	}
-}
-
-static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int i;
-
-	if (!qtd->payload_addr)
-		return;
-
-	for (i = 0; i < BLOCKS; i++) {
-		if (priv->memory_pool[i].start == qtd->payload_addr) {
-			WARN_ON(priv->memory_pool[i].free);
-			priv->memory_pool[i].free = 1;
-			qtd->payload_addr = 0;
-			return;
-		}
-	}
-
-	dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
-						__func__, qtd->payload_addr);
-	WARN_ON(1);
-	qtd->payload_addr = 0;
-}
-
-static int handshake(struct usb_hcd *hcd, u32 reg,
-		      u32 mask, u32 done, int usec)
-{
-	u32 result;
-
-	do {
-		result = reg_read32(hcd->regs, reg);
-		if (result == ~0)
-			return -ENODEV;
-		result &= mask;
-		if (result == done)
-			return 0;
-		udelay(1);
-		usec--;
-	} while (usec > 0);
-	return -ETIMEDOUT;
-}
-
-/* reset a non-running (STS_HALT == 1) controller */
-static int ehci_reset(struct usb_hcd *hcd)
-{
-	int retval;
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-
-	u32 command = reg_read32(hcd->regs, HC_USBCMD);
-
-	command |= CMD_RESET;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-	hcd->state = HC_STATE_HALT;
-	priv->next_statechange = jiffies;
-	retval = handshake(hcd, HC_USBCMD,
-			    CMD_RESET, 0, 250 * 1000);
-	return retval;
-}
-
-static struct isp1760_qh *qh_alloc(gfp_t flags)
-{
-	struct isp1760_qh *qh;
-
-	qh = kmem_cache_zalloc(qh_cachep, flags);
-	if (!qh)
-		return NULL;
-
-	INIT_LIST_HEAD(&qh->qh_list);
-	INIT_LIST_HEAD(&qh->qtd_list);
-	qh->slot = -1;
-
-	return qh;
-}
-
-static void qh_free(struct isp1760_qh *qh)
-{
-	WARN_ON(!list_empty(&qh->qtd_list));
-	WARN_ON(qh->slot > -1);
-	kmem_cache_free(qh_cachep, qh);
-}
-
-/* one-time init, only for memory state */
-static int priv_init(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd		*priv = hcd_to_priv(hcd);
-	u32			hcc_params;
-	int i;
-
-	spin_lock_init(&priv->lock);
-
-	for (i = 0; i < QH_END; i++)
-		INIT_LIST_HEAD(&priv->qh_list[i]);
-
-	/*
-	 * hw default: 1K periodic list heads, one per frame.
-	 * periodic_size can shrink by USBCMD update if hcc_params allows.
-	 */
-	priv->periodic_size = DEFAULT_I_TDPS;
-
-	/* controllers may cache some of the periodic schedule ... */
-	hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS);
-	/* full frame cache */
-	if (HCC_ISOC_CACHE(hcc_params))
-		priv->i_thresh = 8;
-	else /* N microframes cached */
-		priv->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
-
-	return 0;
-}
-
-static int isp1760_hc_setup(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int result;
-	u32 scratch, hwmode;
-
-	/* low-level chip reset */
-	if (gpio_is_valid(priv->rst_gpio)) {
-		unsigned int rst_lvl;
-
-		rst_lvl = (priv->devflags &
-			   ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0;
-
-		gpio_set_value(priv->rst_gpio, rst_lvl);
-		mdelay(50);
-		gpio_set_value(priv->rst_gpio, !rst_lvl);
-	}
-
-	/* Setup HW Mode Control: This assumes a level active-low interrupt */
-	hwmode = HW_DATA_BUS_32BIT;
-
-	if (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16)
-		hwmode &= ~HW_DATA_BUS_32BIT;
-	if (priv->devflags & ISP1760_FLAG_ANALOG_OC)
-		hwmode |= HW_ANA_DIGI_OC;
-	if (priv->devflags & ISP1760_FLAG_DACK_POL_HIGH)
-		hwmode |= HW_DACK_POL_HIGH;
-	if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
-		hwmode |= HW_DREQ_POL_HIGH;
-	if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH)
-		hwmode |= HW_INTR_HIGH_ACT;
-	if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG)
-		hwmode |= HW_INTR_EDGE_TRIG;
-
-	/*
-	 * We have to set this first in case we're in 16-bit mode.
-	 * Write it twice to ensure correct upper bits if switching
-	 * to 16-bit mode.
-	 */
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
-
-	reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe);
-	/* Change bus pattern */
-	scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	scratch = reg_read32(hcd->regs, HC_SCRATCH_REG);
-	if (scratch != 0xdeadbabe) {
-		dev_err(hcd->self.controller, "Scratch test failed.\n");
-		return -ENODEV;
-	}
-
-	/* pre reset */
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE);
-
-	/* reset */
-	reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL);
-	mdelay(100);
-
-	reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC);
-	mdelay(100);
-
-	result = ehci_reset(hcd);
-	if (result)
-		return result;
-
-	/* Step 11 passed */
-
-	dev_info(hcd->self.controller, "bus width: %d, oc: %s\n",
-			   (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ?
-			   16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
-			   "analog" : "digital");
-
-	/* ATL reset */
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
-	mdelay(10);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode);
-
-	reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK);
-
-	/*
-	 * PORT 1 Control register of the ISP1760 is the OTG control
-	 * register on ISP1761. Since there is no OTG or device controller
-	 * support in this driver, we use port 1 as a "normal" USB host port on
-	 * both chips.
-	 */
-	reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2);
-	mdelay(10);
-
-	priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS);
-
-	return priv_init(hcd);
-}
-
-static u32 base_to_chip(u32 base)
-{
-	return ((base - 0x400) >> 3);
-}
-
-static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
-{
-	struct urb *urb;
-
-	if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
-		return 1;
-
-	urb = qtd->urb;
-	qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
-	return (qtd->urb != urb);
-}
-
-/* magic numbers that can affect system performance */
-#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
-#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
-#define	EHCI_TUNE_RL_TT		0
-#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
-#define	EHCI_TUNE_MULT_TT	1
-#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
-
-static void create_ptd_atl(struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct ptd *ptd)
-{
-	u32 maxpacket;
-	u32 multi;
-	u32 rl = RL_COUNTER;
-	u32 nak = NAK_COUNTER;
-
-	memset(ptd, 0, sizeof(*ptd));
-
-	/* according to 3.6.2, max packet len can not be > 0x400 */
-	maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe,
-						usb_pipeout(qtd->urb->pipe));
-	multi =  1 + ((maxpacket >> 11) & 0x3);
-	maxpacket &= 0x7ff;
-
-	/* DW0 */
-	ptd->dw0 = DW0_VALID_BIT;
-	ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
-	ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
-	ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));
-
-	/* DW1 */
-	ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1;
-	ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
-	ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);
-
-	if (usb_pipebulk(qtd->urb->pipe))
-		ptd->dw1 |= DW1_TRANS_BULK;
-	else if  (usb_pipeint(qtd->urb->pipe))
-		ptd->dw1 |= DW1_TRANS_INT;
-
-	if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
-		/* split transaction */
-
-		ptd->dw1 |= DW1_TRANS_SPLIT;
-		if (qtd->urb->dev->speed == USB_SPEED_LOW)
-			ptd->dw1 |= DW1_SE_USB_LOSPEED;
-
-		ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
-		ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);
-
-		/* SE bit for Split INT transfers */
-		if (usb_pipeint(qtd->urb->pipe) &&
-				(qtd->urb->dev->speed == USB_SPEED_LOW))
-			ptd->dw1 |= 2 << 16;
-
-		rl = 0;
-		nak = 0;
-	} else {
-		ptd->dw0 |= TO_DW0_MULTI(multi);
-		if (usb_pipecontrol(qtd->urb->pipe) ||
-						usb_pipebulk(qtd->urb->pipe))
-			ptd->dw3 |= TO_DW3_PING(qh->ping);
-	}
-	/* DW2 */
-	ptd->dw2 = 0;
-	ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
-	ptd->dw2 |= TO_DW2_RL(rl);
-
-	/* DW3 */
-	ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
-	ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
-	if (usb_pipecontrol(qtd->urb->pipe)) {
-		if (qtd->data_buffer == qtd->urb->setup_packet)
-			ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
-		else if (last_qtd_of_urb(qtd, qh))
-			ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
-	}
-
-	ptd->dw3 |= DW3_ACTIVE_BIT;
-	/* Cerr */
-	ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
-}
-
-static void transform_add_int(struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct ptd *ptd)
-{
-	u32 usof;
-	u32 period;
-
-	/*
-	 * Most of this is guessing. ISP1761 datasheet is quite unclear, and
-	 * the algorithm from the original Philips driver code, which was
-	 * pretty much used in this driver before as well, is quite horrendous
-	 * and, i believe, incorrect. The code below follows the datasheet and
-	 * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
-	 * more reliable this way (fingers crossed...).
-	 */
-
-	if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
-		/* urb->interval is in units of microframes (1/8 ms) */
-		period = qtd->urb->interval >> 3;
-
-		if (qtd->urb->interval > 4)
-			usof = 0x01; /* One bit set =>
-						interval 1 ms * uFrame-match */
-		else if (qtd->urb->interval > 2)
-			usof = 0x22; /* Two bits set => interval 1/2 ms */
-		else if (qtd->urb->interval > 1)
-			usof = 0x55; /* Four bits set => interval 1/4 ms */
-		else
-			usof = 0xff; /* All bits set => interval 1/8 ms */
-	} else {
-		/* urb->interval is in units of frames (1 ms) */
-		period = qtd->urb->interval;
-		usof = 0x0f;		/* Execute Start Split on any of the
-					   four first uFrames */
-
-		/*
-		 * First 8 bits in dw5 is uSCS and "specifies which uSOF the
-		 * complete split needs to be sent. Valid only for IN." Also,
-		 * "All bits can be set to one for every transfer." (p 82,
-		 * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
-		 * that number come from? 0xff seems to work fine...
-		 */
-		/* ptd->dw5 = 0x1c; */
-		ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */
-	}
-
-	period = period >> 1;/* Ensure equal or shorter period than requested */
-	period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */
-
-	ptd->dw2 |= period;
-	ptd->dw4 = usof;
-}
-
-static void create_ptd_int(struct isp1760_qh *qh,
-			struct isp1760_qtd *qtd, struct ptd *ptd)
-{
-	create_ptd_atl(qh, qtd, ptd);
-	transform_add_int(qh, qtd, ptd);
-}
-
-static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
-__releases(priv->lock)
-__acquires(priv->lock)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-
-	if (!urb->unlinked) {
-		if (urb->status == -EINPROGRESS)
-			urb->status = 0;
-	}
-
-	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
-		void *ptr;
-		for (ptr = urb->transfer_buffer;
-		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
-		     ptr += PAGE_SIZE)
-			flush_dcache_page(virt_to_page(ptr));
-	}
-
-	/* complete() can reenter this HCD */
-	usb_hcd_unlink_urb_from_ep(hcd, urb);
-	spin_unlock(&priv->lock);
-	usb_hcd_giveback_urb(hcd, urb, urb->status);
-	spin_lock(&priv->lock);
-}
-
-static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
-								u8 packet_type)
-{
-	struct isp1760_qtd *qtd;
-
-	qtd = kmem_cache_zalloc(qtd_cachep, flags);
-	if (!qtd)
-		return NULL;
-
-	INIT_LIST_HEAD(&qtd->qtd_list);
-	qtd->urb = urb;
-	qtd->packet_type = packet_type;
-	qtd->status = QTD_ENQUEUED;
-	qtd->actual_length = 0;
-
-	return qtd;
-}
-
-static void qtd_free(struct isp1760_qtd *qtd)
-{
-	WARN_ON(qtd->payload_addr);
-	kmem_cache_free(qtd_cachep, qtd);
-}
-
-static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
-				struct slotinfo *slots, struct isp1760_qtd *qtd,
-				struct isp1760_qh *qh, struct ptd *ptd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int skip_map;
-
-	WARN_ON((slot < 0) || (slot > 31));
-	WARN_ON(qtd->length && !qtd->payload_addr);
-	WARN_ON(slots[slot].qtd);
-	WARN_ON(slots[slot].qh);
-	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
-
-	/* Make sure done map has not triggered from some unlinked transfer */
-	if (ptd_offset == ATL_PTD_OFFSET) {
-		priv->atl_done_map |= reg_read32(hcd->regs,
-						HC_ATL_PTD_DONEMAP_REG);
-		priv->atl_done_map &= ~(1 << slot);
-	} else {
-		priv->int_done_map |= reg_read32(hcd->regs,
-						HC_INT_PTD_DONEMAP_REG);
-		priv->int_done_map &= ~(1 << slot);
-	}
-
-	qh->slot = slot;
-	qtd->status = QTD_XFER_STARTED;
-	slots[slot].timestamp = jiffies;
-	slots[slot].qtd = qtd;
-	slots[slot].qh = qh;
-	ptd_write(hcd->regs, ptd_offset, slot, ptd);
-
-	if (ptd_offset == ATL_PTD_OFFSET) {
-		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-		skip_map &= ~(1 << qh->slot);
-		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
-	} else {
-		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-		skip_map &= ~(1 << qh->slot);
-		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
-	}
-}
-
-static int is_short_bulk(struct isp1760_qtd *qtd)
-{
-	return (usb_pipebulk(qtd->urb->pipe) &&
-					(qtd->actual_length < qtd->length));
-}
-
-static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
-						struct list_head *urb_list)
-{
-	int last_qtd;
-	struct isp1760_qtd *qtd, *qtd_next;
-	struct urb_listitem *urb_listitem;
-
-	list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
-		if (qtd->status < QTD_XFER_COMPLETE)
-			break;
-
-		last_qtd = last_qtd_of_urb(qtd, qh);
-
-		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
-			qtd_next->status = QTD_RETIRE;
-
-		if (qtd->status == QTD_XFER_COMPLETE) {
-			if (qtd->actual_length) {
-				switch (qtd->packet_type) {
-				case IN_PID:
-					mem_reads8(hcd->regs, qtd->payload_addr,
-							qtd->data_buffer,
-							qtd->actual_length);
-					/* Fall through (?) */
-				case OUT_PID:
-					qtd->urb->actual_length +=
-							qtd->actual_length;
-					/* Fall through ... */
-				case SETUP_PID:
-					break;
-				}
-			}
-
-			if (is_short_bulk(qtd)) {
-				if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
-					qtd->urb->status = -EREMOTEIO;
-				if (!last_qtd)
-					qtd_next->status = QTD_RETIRE;
-			}
-		}
-
-		if (qtd->payload_addr)
-			free_mem(hcd, qtd);
-
-		if (last_qtd) {
-			if ((qtd->status == QTD_RETIRE) &&
-					(qtd->urb->status == -EINPROGRESS))
-				qtd->urb->status = -EPIPE;
-			/* Defer calling of urb_done() since it releases lock */
-			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
-								GFP_ATOMIC);
-			if (unlikely(!urb_listitem))
-				break; /* Try again on next call */
-			urb_listitem->urb = qtd->urb;
-			list_add_tail(&urb_listitem->urb_list, urb_list);
-		}
-
-		list_del(&qtd->qtd_list);
-		qtd_free(qtd);
-	}
-}
-
-#define ENQUEUE_DEPTH	2
-static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int ptd_offset;
-	struct slotinfo *slots;
-	int curr_slot, free_slot;
-	int n;
-	struct ptd ptd;
-	struct isp1760_qtd *qtd;
-
-	if (unlikely(list_empty(&qh->qtd_list))) {
-		WARN_ON(1);
-		return;
-	}
-
-	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
-	if (qh->tt_buffer_dirty)
-		return;
-
-	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
-							qtd_list)->urb->pipe)) {
-		ptd_offset = INT_PTD_OFFSET;
-		slots = priv->int_slots;
-	} else {
-		ptd_offset = ATL_PTD_OFFSET;
-		slots = priv->atl_slots;
-	}
-
-	free_slot = -1;
-	for (curr_slot = 0; curr_slot < 32; curr_slot++) {
-		if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
-			free_slot = curr_slot;
-		if (slots[curr_slot].qh == qh)
-			break;
-	}
-
-	n = 0;
-	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
-		if (qtd->status == QTD_ENQUEUED) {
-			WARN_ON(qtd->payload_addr);
-			alloc_mem(hcd, qtd);
-			if ((qtd->length) && (!qtd->payload_addr))
-				break;
-
-			if ((qtd->length) &&
-			    ((qtd->packet_type == SETUP_PID) ||
-			     (qtd->packet_type == OUT_PID))) {
-				mem_writes8(hcd->regs, qtd->payload_addr,
-						qtd->data_buffer, qtd->length);
-			}
-
-			qtd->status = QTD_PAYLOAD_ALLOC;
-		}
-
-		if (qtd->status == QTD_PAYLOAD_ALLOC) {
-/*
-			if ((curr_slot > 31) && (free_slot == -1))
-				dev_dbg(hcd->self.controller, "%s: No slot "
-					"available for transfer\n", __func__);
-*/
-			/* Start xfer for this endpoint if not already done */
-			if ((curr_slot > 31) && (free_slot > -1)) {
-				if (usb_pipeint(qtd->urb->pipe))
-					create_ptd_int(qh, qtd, &ptd);
-				else
-					create_ptd_atl(qh, qtd, &ptd);
-
-				start_bus_transfer(hcd, ptd_offset, free_slot,
-							slots, qtd, qh, &ptd);
-				curr_slot = free_slot;
-			}
-
-			n++;
-			if (n >= ENQUEUE_DEPTH)
-				break;
-		}
-	}
-}
-
-static void schedule_ptds(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv;
-	struct isp1760_qh *qh, *qh_next;
-	struct list_head *ep_queue;
-	LIST_HEAD(urb_list);
-	struct urb_listitem *urb_listitem, *urb_listitem_next;
-	int i;
-
-	if (!hcd) {
-		WARN_ON(1);
-		return;
-	}
-
-	priv = hcd_to_priv(hcd);
-
-	/*
-	 * check finished/retired xfers, transfer payloads, call urb_done()
-	 */
-	for (i = 0; i < QH_END; i++) {
-		ep_queue = &priv->qh_list[i];
-		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
-			collect_qtds(hcd, qh, &urb_list);
-			if (list_empty(&qh->qtd_list))
-				list_del(&qh->qh_list);
-		}
-	}
-
-	list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
-								urb_list) {
-		isp1760_urb_done(hcd, urb_listitem->urb);
-		kmem_cache_free(urb_listitem_cachep, urb_listitem);
-	}
-
-	/*
-	 * Schedule packets for transfer.
-	 *
-	 * According to USB2.0 specification:
-	 *
-	 * 1st prio: interrupt xfers, up to 80 % of bandwidth
-	 * 2nd prio: control xfers
-	 * 3rd prio: bulk xfers
-	 *
-	 * ... but let's use a simpler scheme here (mostly because ISP1761 doc
-	 * is very unclear on how to prioritize traffic):
-	 *
-	 * 1) Enqueue any queued control transfers, as long as payload chip mem
-	 *    and PTD ATL slots are available.
-	 * 2) Enqueue any queued INT transfers, as long as payload chip mem
-	 *    and PTD INT slots are available.
-	 * 3) Enqueue any queued bulk transfers, as long as payload chip mem
-	 *    and PTD ATL slots are available.
-	 *
-	 * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
-	 * conservation of chip mem and performance.
-	 *
-	 * I'm sure this scheme could be improved upon!
-	 */
-	for (i = 0; i < QH_END; i++) {
-		ep_queue = &priv->qh_list[i];
-		list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
-			enqueue_qtds(hcd, qh);
-	}
-}
-
-#define PTD_STATE_QTD_DONE	1
-#define PTD_STATE_QTD_RELOAD	2
-#define PTD_STATE_URB_RETIRE	3
-
-static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
-								struct urb *urb)
-{
-	__dw dw4;
-	int i;
-
-	dw4 = ptd->dw4;
-	dw4 >>= 8;
-
-	/* FIXME: ISP1761 datasheet does not say what to do with these. Do we
-	   need to handle these errors? Is it done in hardware? */
-
-	if (ptd->dw3 & DW3_HALT_BIT) {
-
-		urb->status = -EPROTO; /* Default unknown error */
-
-		for (i = 0; i < 8; i++) {
-			switch (dw4 & 0x7) {
-			case INT_UNDERRUN:
-				dev_dbg(hcd->self.controller, "%s: underrun "
-						"during uFrame %d\n",
-						__func__, i);
-				urb->status = -ECOMM; /* Could not write data */
-				break;
-			case INT_EXACT:
-				dev_dbg(hcd->self.controller, "%s: transaction "
-						"error during uFrame %d\n",
-						__func__, i);
-				urb->status = -EPROTO; /* timeout, bad CRC, PID
-							  error etc. */
-				break;
-			case INT_BABBLE:
-				dev_dbg(hcd->self.controller, "%s: babble "
-						"error during uFrame %d\n",
-						__func__, i);
-				urb->status = -EOVERFLOW;
-				break;
-			}
-			dw4 >>= 3;
-		}
-
-		return PTD_STATE_URB_RETIRE;
-	}
-
-	return PTD_STATE_QTD_DONE;
-}
-
-static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
-								struct urb *urb)
-{
-	WARN_ON(!ptd);
-	if (ptd->dw3 & DW3_HALT_BIT) {
-		if (ptd->dw3 & DW3_BABBLE_BIT)
-			urb->status = -EOVERFLOW;
-		else if (FROM_DW3_CERR(ptd->dw3))
-			urb->status = -EPIPE;  /* Stall */
-		else if (ptd->dw3 & DW3_ERROR_BIT)
-			urb->status = -EPROTO; /* XactErr */
-		else
-			urb->status = -EPROTO; /* Unknown */
-/*
-		dev_dbg(hcd->self.controller, "%s: ptd error:\n"
-			"        dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
-			"        dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
-			__func__,
-			ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
-			ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
-*/
-		return PTD_STATE_URB_RETIRE;
-	}
-
-	if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
-		/* Transfer Error, *but* active and no HALT -> reload */
-		dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
-		return PTD_STATE_QTD_RELOAD;
-	}
-
-	if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
-		/*
-		 * NAKs are handled in HW by the chip. Usually if the
-		 * device is not able to send data fast enough.
-		 * This happens mostly on slower hardware.
-		 */
-		return PTD_STATE_QTD_RELOAD;
-	}
-
-	return PTD_STATE_QTD_DONE;
-}
-
-static void handle_done_ptds(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	struct ptd ptd;
-	struct isp1760_qh *qh;
-	int slot;
-	int state;
-	struct slotinfo *slots;
-	u32 ptd_offset;
-	struct isp1760_qtd *qtd;
-	int modified;
-	int skip_map;
-
-	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-	priv->int_done_map &= ~skip_map;
-	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-	priv->atl_done_map &= ~skip_map;
-
-	modified = priv->int_done_map || priv->atl_done_map;
-
-	while (priv->int_done_map || priv->atl_done_map) {
-		if (priv->int_done_map) {
-			/* INT ptd */
-			slot = __ffs(priv->int_done_map);
-			priv->int_done_map &= ~(1 << slot);
-			slots = priv->int_slots;
-			/* This should not trigger, and could be removed if
-			   noone have any problems with it triggering: */
-			if (!slots[slot].qh) {
-				WARN_ON(1);
-				continue;
-			}
-			ptd_offset = INT_PTD_OFFSET;
-			ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd);
-			state = check_int_transfer(hcd, &ptd,
-							slots[slot].qtd->urb);
-		} else {
-			/* ATL ptd */
-			slot = __ffs(priv->atl_done_map);
-			priv->atl_done_map &= ~(1 << slot);
-			slots = priv->atl_slots;
-			/* This should not trigger, and could be removed if
-			   noone have any problems with it triggering: */
-			if (!slots[slot].qh) {
-				WARN_ON(1);
-				continue;
-			}
-			ptd_offset = ATL_PTD_OFFSET;
-			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
-			state = check_atl_transfer(hcd, &ptd,
-							slots[slot].qtd->urb);
-		}
-
-		qtd = slots[slot].qtd;
-		slots[slot].qtd = NULL;
-		qh = slots[slot].qh;
-		slots[slot].qh = NULL;
-		qh->slot = -1;
-
-		WARN_ON(qtd->status != QTD_XFER_STARTED);
-
-		switch (state) {
-		case PTD_STATE_QTD_DONE:
-			if ((usb_pipeint(qtd->urb->pipe)) &&
-				       (qtd->urb->dev->speed != USB_SPEED_HIGH))
-				qtd->actual_length =
-				       FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
-			else
-				qtd->actual_length =
-					FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);
-
-			qtd->status = QTD_XFER_COMPLETE;
-			if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
-							is_short_bulk(qtd))
-				qtd = NULL;
-			else
-				qtd = list_entry(qtd->qtd_list.next,
-							typeof(*qtd), qtd_list);
-
-			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
-			qh->ping = FROM_DW3_PING(ptd.dw3);
-			break;
-
-		case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
-			qtd->status = QTD_PAYLOAD_ALLOC;
-			ptd.dw0 |= DW0_VALID_BIT;
-			/* RL counter = ERR counter */
-			ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
-			ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
-			ptd.dw3 &= ~TO_DW3_CERR(3);
-			ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
-			qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
-			qh->ping = FROM_DW3_PING(ptd.dw3);
-			break;
-
-		case PTD_STATE_URB_RETIRE:
-			qtd->status = QTD_RETIRE;
-			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
-					(qtd->urb->status != -EPIPE) &&
-					(qtd->urb->status != -EREMOTEIO)) {
-				qh->tt_buffer_dirty = 1;
-				if (usb_hub_clear_tt_buffer(qtd->urb))
-					/* Clear failed; let's hope things work
-					   anyway */
-					qh->tt_buffer_dirty = 0;
-			}
-			qtd = NULL;
-			qh->toggle = 0;
-			qh->ping = 0;
-			break;
-
-		default:
-			WARN_ON(1);
-			continue;
-		}
-
-		if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
-			if (slots == priv->int_slots) {
-				if (state == PTD_STATE_QTD_RELOAD)
-					dev_err(hcd->self.controller,
-						"%s: PTD_STATE_QTD_RELOAD on "
-						"interrupt packet\n", __func__);
-				if (state != PTD_STATE_QTD_RELOAD)
-					create_ptd_int(qh, qtd, &ptd);
-			} else {
-				if (state != PTD_STATE_QTD_RELOAD)
-					create_ptd_atl(qh, qtd, &ptd);
-			}
-
-			start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
-				qh, &ptd);
-		}
-	}
-
-	if (modified)
-		schedule_ptds(hcd);
-}
-
-static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 imask;
-	irqreturn_t irqret = IRQ_NONE;
-
-	spin_lock(&priv->lock);
-
-	if (!(hcd->state & HC_STATE_RUNNING))
-		goto leave;
-
-	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
-	if (unlikely(!imask))
-		goto leave;
-	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
-
-	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
-	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
-
-	handle_done_ptds(hcd);
-
-	irqret = IRQ_HANDLED;
-leave:
-	spin_unlock(&priv->lock);
-
-	return irqret;
-}
-
-/*
- * Workaround for problem described in chip errata 2:
- *
- * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
- * One solution suggested in the errata is to use SOF interrupts _instead_of_
- * ATL done interrupts (the "instead of" might be important since it seems
- * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
- * to set the PTD's done bit in addition to not generating an interrupt!).
- *
- * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
- * done bit is not being set. This is bad - it blocks the endpoint until reboot.
- *
- * If we use SOF interrupts only, we get latency between ptd completion and the
- * actual handling. This is very noticeable in testusb runs which takes several
- * minutes longer without ATL interrupts.
- *
- * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
- * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
- * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
- * completed and its done map bit is set.
- *
- * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
- * not to cause too much lag when this HW bug occurs, while still hopefully
- * ensuring that the check does not falsely trigger.
- */
-#define SLOT_TIMEOUT 300
-#define SLOT_CHECK_PERIOD 200
-static struct timer_list errata2_timer;
-
-static void errata2_function(unsigned long data)
-{
-	struct usb_hcd *hcd = (struct usb_hcd *) data;
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int slot;
-	struct ptd ptd;
-	unsigned long spinflags;
-
-	spin_lock_irqsave(&priv->lock, spinflags);
-
-	for (slot = 0; slot < 32; slot++)
-		if (priv->atl_slots[slot].qh && time_after(jiffies,
-					priv->atl_slots[slot].timestamp +
-					SLOT_TIMEOUT * HZ / 1000)) {
-			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
-			if (!FROM_DW0_VALID(ptd.dw0) &&
-					!FROM_DW3_ACTIVE(ptd.dw3))
-				priv->atl_done_map |= 1 << slot;
-		}
-
-	if (priv->atl_done_map)
-		handle_done_ptds(hcd);
-
-	spin_unlock_irqrestore(&priv->lock, spinflags);
-
-	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
-	add_timer(&errata2_timer);
-}
-
-static int isp1760_run(struct usb_hcd *hcd)
-{
-	int retval;
-	u32 temp;
-	u32 command;
-	u32 chipid;
-
-	hcd->uses_new_polling = 1;
-
-	hcd->state = HC_STATE_RUNNING;
-
-	/* Set PTD interrupt AND & OR maps */
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
-	/* step 23 passed */
-
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~(CMD_LRESET|CMD_RESET);
-	command |= CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-
-	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
-	if (retval)
-		return retval;
-
-	/*
-	 * XXX
-	 * Spec says to write FLAG_CF as last config action, priv code grabs
-	 * the semaphore while doing so.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
-	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
-	up_write(&ehci_cf_port_reset_rwsem);
-	if (retval)
-		return retval;
-
-	setup_timer(&errata2_timer, errata2_function, (unsigned long)hcd);
-	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
-	add_timer(&errata2_timer);
-
-	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
-					chipid & 0xffff, chipid >> 16);
-
-	/* PTD Register Init Part 2, Step 28 */
-
-	/* Setup registers controlling PTD checking */
-	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
-						ATL_BUF_FILL | INT_BUF_FILL);
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	return 0;
-}
-
-static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
-{
-	qtd->data_buffer = databuffer;
-
-	if (len > MAX_PAYLOAD_SIZE)
-		len = MAX_PAYLOAD_SIZE;
-	qtd->length = len;
-
-	return qtd->length;
-}
-
-static void qtd_list_free(struct list_head *qtd_list)
-{
-	struct isp1760_qtd *qtd, *qtd_next;
-
-	list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
-		list_del(&qtd->qtd_list);
-		qtd_free(qtd);
-	}
-}
-
-/*
- * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
- * Also calculate the PID type (SETUP/IN/OUT) for each packet.
- */
-#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-static void packetize_urb(struct usb_hcd *hcd,
-		struct urb *urb, struct list_head *head, gfp_t flags)
-{
-	struct isp1760_qtd *qtd;
-	void *buf;
-	int len, maxpacketsize;
-	u8 packet_type;
-
-	/*
-	 * URBs map to sequences of QTDs:  one logical transaction
-	 */
-
-	if (!urb->transfer_buffer && urb->transfer_buffer_length) {
-		/* XXX This looks like usb storage / SCSI bug */
-		dev_err(hcd->self.controller,
-				"buf is null, dma is %08lx len is %d\n",
-				(long unsigned)urb->transfer_dma,
-				urb->transfer_buffer_length);
-		WARN_ON(1);
-	}
-
-	if (usb_pipein(urb->pipe))
-		packet_type = IN_PID;
-	else
-		packet_type = OUT_PID;
-
-	if (usb_pipecontrol(urb->pipe)) {
-		qtd = qtd_alloc(flags, urb, SETUP_PID);
-		if (!qtd)
-			goto cleanup;
-		qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
-		list_add_tail(&qtd->qtd_list, head);
-
-		/* for zero length DATA stages, STATUS is always IN */
-		if (urb->transfer_buffer_length == 0)
-			packet_type = IN_PID;
-	}
-
-	maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe,
-						usb_pipeout(urb->pipe)));
-
-	/*
-	 * buffer gets wrapped in one or more qtds;
-	 * last one may be "short" (including zero len)
-	 * and may serve as a control status ack
-	 */
-	buf = urb->transfer_buffer;
-	len = urb->transfer_buffer_length;
-
-	for (;;) {
-		int this_qtd_len;
-
-		qtd = qtd_alloc(flags, urb, packet_type);
-		if (!qtd)
-			goto cleanup;
-		this_qtd_len = qtd_fill(qtd, buf, len);
-		list_add_tail(&qtd->qtd_list, head);
-
-		len -= this_qtd_len;
-		buf += this_qtd_len;
-
-		if (len <= 0)
-			break;
-	}
-
-	/*
-	 * control requests may need a terminating data "status" ack;
-	 * bulk ones may need a terminating short packet (zero length).
-	 */
-	if (urb->transfer_buffer_length != 0) {
-		int one_more = 0;
-
-		if (usb_pipecontrol(urb->pipe)) {
-			one_more = 1;
-			if (packet_type == IN_PID)
-				packet_type = OUT_PID;
-			else
-				packet_type = IN_PID;
-		} else if (usb_pipebulk(urb->pipe)
-				&& (urb->transfer_flags & URB_ZERO_PACKET)
-				&& !(urb->transfer_buffer_length %
-							maxpacketsize)) {
-			one_more = 1;
-		}
-		if (one_more) {
-			qtd = qtd_alloc(flags, urb, packet_type);
-			if (!qtd)
-				goto cleanup;
-
-			/* never any data in such packets */
-			qtd_fill(qtd, NULL, 0);
-			list_add_tail(&qtd->qtd_list, head);
-		}
-	}
-
-	return;
-
-cleanup:
-	qtd_list_free(head);
-}
-
-static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
-		gfp_t mem_flags)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	struct list_head *ep_queue;
-	struct isp1760_qh *qh, *qhit;
-	unsigned long spinflags;
-	LIST_HEAD(new_qtds);
-	int retval;
-	int qh_in_queue;
-
-	switch (usb_pipetype(urb->pipe)) {
-	case PIPE_CONTROL:
-		ep_queue = &priv->qh_list[QH_CONTROL];
-		break;
-	case PIPE_BULK:
-		ep_queue = &priv->qh_list[QH_BULK];
-		break;
-	case PIPE_INTERRUPT:
-		if (urb->interval < 0)
-			return -EINVAL;
-		/* FIXME: Check bandwidth  */
-		ep_queue = &priv->qh_list[QH_INTERRUPT];
-		break;
-	case PIPE_ISOCHRONOUS:
-		dev_err(hcd->self.controller, "%s: isochronous USB packets "
-							"not yet supported\n",
-							__func__);
-		return -EPIPE;
-	default:
-		dev_err(hcd->self.controller, "%s: unknown pipe type\n",
-							__func__);
-		return -EPIPE;
-	}
-
-	if (usb_pipein(urb->pipe))
-		urb->actual_length = 0;
-
-	packetize_urb(hcd, urb, &new_qtds, mem_flags);
-	if (list_empty(&new_qtds))
-		return -ENOMEM;
-
-	retval = 0;
-	spin_lock_irqsave(&priv->lock, spinflags);
-
-	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
-		retval = -ESHUTDOWN;
-		qtd_list_free(&new_qtds);
-		goto out;
-	}
-	retval = usb_hcd_link_urb_to_ep(hcd, urb);
-	if (retval) {
-		qtd_list_free(&new_qtds);
-		goto out;
-	}
-
-	qh = urb->ep->hcpriv;
-	if (qh) {
-		qh_in_queue = 0;
-		list_for_each_entry(qhit, ep_queue, qh_list) {
-			if (qhit == qh) {
-				qh_in_queue = 1;
-				break;
-			}
-		}
-		if (!qh_in_queue)
-			list_add_tail(&qh->qh_list, ep_queue);
-	} else {
-		qh = qh_alloc(GFP_ATOMIC);
-		if (!qh) {
-			retval = -ENOMEM;
-			usb_hcd_unlink_urb_from_ep(hcd, urb);
-			qtd_list_free(&new_qtds);
-			goto out;
-		}
-		list_add_tail(&qh->qh_list, ep_queue);
-		urb->ep->hcpriv = qh;
-	}
-
-	list_splice_tail(&new_qtds, &qh->qtd_list);
-	schedule_ptds(hcd);
-
-out:
-	spin_unlock_irqrestore(&priv->lock, spinflags);
-	return retval;
-}
-
-static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
-		struct isp1760_qh *qh)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int skip_map;
-
-	WARN_ON(qh->slot == -1);
-
-	/* We need to forcefully reclaim the slot since some transfers never
-	   return, e.g. interrupt transfers and NAKed bulk transfers. */
-	if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
-		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-		skip_map |= (1 << qh->slot);
-		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
-		priv->atl_slots[qh->slot].qh = NULL;
-		priv->atl_slots[qh->slot].qtd = NULL;
-	} else {
-		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-		skip_map |= (1 << qh->slot);
-		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
-		priv->int_slots[qh->slot].qh = NULL;
-		priv->int_slots[qh->slot].qtd = NULL;
-	}
-
-	qh->slot = -1;
-}
-
-/*
- * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
- * any active transfer belonging to the urb in the process.
- */
-static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
-						struct isp1760_qtd *qtd)
-{
-	struct urb *urb;
-	int urb_was_running;
-
-	urb = qtd->urb;
-	urb_was_running = 0;
-	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
-		if (qtd->urb != urb)
-			break;
-
-		if (qtd->status >= QTD_XFER_STARTED)
-			urb_was_running = 1;
-		if (last_qtd_of_urb(qtd, qh) &&
-					(qtd->status >= QTD_XFER_COMPLETE))
-			urb_was_running = 0;
-
-		if (qtd->status == QTD_XFER_STARTED)
-			kill_transfer(hcd, urb, qh);
-		qtd->status = QTD_RETIRE;
-	}
-
-	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
-		qh->tt_buffer_dirty = 1;
-		if (usb_hub_clear_tt_buffer(urb))
-			/* Clear failed; let's hope things work anyway */
-			qh->tt_buffer_dirty = 0;
-	}
-}
-
-static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-		int status)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	unsigned long spinflags;
-	struct isp1760_qh *qh;
-	struct isp1760_qtd *qtd;
-	int retval = 0;
-
-	spin_lock_irqsave(&priv->lock, spinflags);
-	retval = usb_hcd_check_unlink_urb(hcd, urb, status);
-	if (retval)
-		goto out;
-
-	qh = urb->ep->hcpriv;
-	if (!qh) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
-		if (qtd->urb == urb) {
-			dequeue_urb_from_qtd(hcd, qh, qtd);
-			list_move(&qtd->qtd_list, &qh->qtd_list);
-			break;
-		}
-
-	urb->status = status;
-	schedule_ptds(hcd);
-
-out:
-	spin_unlock_irqrestore(&priv->lock, spinflags);
-	return retval;
-}
-
-static void isp1760_endpoint_disable(struct usb_hcd *hcd,
-		struct usb_host_endpoint *ep)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	unsigned long spinflags;
-	struct isp1760_qh *qh, *qh_iter;
-	int i;
-
-	spin_lock_irqsave(&priv->lock, spinflags);
-
-	qh = ep->hcpriv;
-	if (!qh)
-		goto out;
-
-	WARN_ON(!list_empty(&qh->qtd_list));
-
-	for (i = 0; i < QH_END; i++)
-		list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
-			if (qh_iter == qh) {
-				list_del(&qh_iter->qh_list);
-				i = QH_END;
-				break;
-			}
-	qh_free(qh);
-	ep->hcpriv = NULL;
-
-	schedule_ptds(hcd);
-
-out:
-	spin_unlock_irqrestore(&priv->lock, spinflags);
-}
-
-static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 temp, status = 0;
-	u32 mask;
-	int retval = 1;
-	unsigned long flags;
-
-	/* if !PM, root hub timers won't get shut down ... */
-	if (!HC_IS_RUNNING(hcd->state))
-		return 0;
-
-	/* init status to no-changes */
-	buf[0] = 0;
-	mask = PORT_CSC;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	temp = reg_read32(hcd->regs, HC_PORTSC1);
-
-	if (temp & PORT_OWNER) {
-		if (temp & PORT_CSC) {
-			temp &= ~PORT_CSC;
-			reg_write32(hcd->regs, HC_PORTSC1, temp);
-			goto done;
-		}
-	}
-
-	/*
-	 * Return status information even for ports with OWNER set.
-	 * Otherwise hub_wq wouldn't see the disconnect event when a
-	 * high-speed device is switched over to the companion
-	 * controller by the user.
-	 */
-
-	if ((temp & mask) != 0
-			|| ((temp & PORT_RESUME) != 0
-				&& time_after_eq(jiffies,
-					priv->reset_done))) {
-		buf [0] |= 1 << (0 + 1);
-		status = STS_PCD;
-	}
-	/* FIXME autosuspend idle root hubs */
-done:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return status ? retval : 0;
-}
-
-static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
-		struct usb_hub_descriptor *desc)
-{
-	int ports = HCS_N_PORTS(priv->hcs_params);
-	u16 temp;
-
-	desc->bDescriptorType = 0x29;
-	/* priv 1.0, 2.3.9 says 20ms max */
-	desc->bPwrOn2PwrGood = 10;
-	desc->bHubContrCurrent = 0;
-
-	desc->bNbrPorts = ports;
-	temp = 1 + (ports / 8);
-	desc->bDescLength = 7 + 2 * temp;
-
-	/* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-	memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
-	memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
-
-	/* per-port overcurrent reporting */
-	temp = HUB_CHAR_INDV_PORT_OCPM;
-	if (HCS_PPC(priv->hcs_params))
-		/* per-port power control */
-		temp |= HUB_CHAR_INDV_PORT_LPSM;
-	else
-		/* no power switching */
-		temp |= HUB_CHAR_NO_LPSM;
-	desc->wHubCharacteristics = cpu_to_le16(temp);
-}
-
-#define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
-
-static int check_reset_complete(struct usb_hcd *hcd, int index,
-		int port_status)
-{
-	if (!(port_status & PORT_CONNECT))
-		return port_status;
-
-	/* if reset finished and it's still not enabled -- handoff */
-	if (!(port_status & PORT_PE)) {
-
-		dev_info(hcd->self.controller,
-					"port %d full speed --> companion\n",
-					index + 1);
-
-		port_status |= PORT_OWNER;
-		port_status &= ~PORT_RWC_BITS;
-		reg_write32(hcd->regs, HC_PORTSC1, port_status);
-
-	} else
-		dev_info(hcd->self.controller, "port %d high speed\n",
-								index + 1);
-
-	return port_status;
-}
-
-static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
-		u16 wValue, u16 wIndex, char *buf, u16 wLength)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	int ports = HCS_N_PORTS(priv->hcs_params);
-	u32 temp, status;
-	unsigned long flags;
-	int retval = 0;
-	unsigned selector;
-
-	/*
-	 * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
-	 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
-	 * (track current state ourselves) ... blink for diagnostics,
-	 * power, "this is the one", etc.  EHCI spec supports this.
-	 */
-
-	spin_lock_irqsave(&priv->lock, flags);
-	switch (typeReq) {
-	case ClearHubFeature:
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-		case C_HUB_OVER_CURRENT:
-			/* no hub-wide feature/status flags */
-			break;
-		default:
-			goto error;
-		}
-		break;
-	case ClearPortFeature:
-		if (!wIndex || wIndex > ports)
-			goto error;
-		wIndex--;
-		temp = reg_read32(hcd->regs, HC_PORTSC1);
-
-		/*
-		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, hub_wq needs to be able to clear
-		 * the port-change status bits (especially
-		 * USB_PORT_STAT_C_CONNECTION).
-		 */
-
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE);
-			break;
-		case USB_PORT_FEAT_C_ENABLE:
-			/* XXX error? */
-			break;
-		case USB_PORT_FEAT_SUSPEND:
-			if (temp & PORT_RESET)
-				goto error;
-
-			if (temp & PORT_SUSPEND) {
-				if ((temp & PORT_PE) == 0)
-					goto error;
-				/* resume signaling for 20 msec */
-				temp &= ~(PORT_RWC_BITS);
-				reg_write32(hcd->regs, HC_PORTSC1,
-							temp | PORT_RESUME);
-				priv->reset_done = jiffies +
-					msecs_to_jiffies(20);
-			}
-			break;
-		case USB_PORT_FEAT_C_SUSPEND:
-			/* we auto-clear this feature */
-			break;
-		case USB_PORT_FEAT_POWER:
-			if (HCS_PPC(priv->hcs_params))
-				reg_write32(hcd->regs, HC_PORTSC1,
-							temp & ~PORT_POWER);
-			break;
-		case USB_PORT_FEAT_C_CONNECTION:
-			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC);
-			break;
-		case USB_PORT_FEAT_C_OVER_CURRENT:
-			/* XXX error ?*/
-			break;
-		case USB_PORT_FEAT_C_RESET:
-			/* GetPortStatus clears reset */
-			break;
-		default:
-			goto error;
-		}
-		reg_read32(hcd->regs, HC_USBCMD);
-		break;
-	case GetHubDescriptor:
-		isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
-			buf);
-		break;
-	case GetHubStatus:
-		/* no hub-wide feature/status flags */
-		memset(buf, 0, 4);
-		break;
-	case GetPortStatus:
-		if (!wIndex || wIndex > ports)
-			goto error;
-		wIndex--;
-		status = 0;
-		temp = reg_read32(hcd->regs, HC_PORTSC1);
-
-		/* wPortChange bits */
-		if (temp & PORT_CSC)
-			status |= USB_PORT_STAT_C_CONNECTION << 16;
-
-
-		/* whoever resumes must GetPortStatus to complete it!! */
-		if (temp & PORT_RESUME) {
-			dev_err(hcd->self.controller, "Port resume should be skipped.\n");
-
-			/* Remote Wakeup received? */
-			if (!priv->reset_done) {
-				/* resume signaling for 20 msec */
-				priv->reset_done = jiffies
-						+ msecs_to_jiffies(20);
-				/* check the port again */
-				mod_timer(&hcd->rh_timer, priv->reset_done);
-			}
-
-			/* resume completed? */
-			else if (time_after_eq(jiffies,
-					priv->reset_done)) {
-				status |= USB_PORT_STAT_C_SUSPEND << 16;
-				priv->reset_done = 0;
-
-				/* stop resume signaling */
-				temp = reg_read32(hcd->regs, HC_PORTSC1);
-				reg_write32(hcd->regs, HC_PORTSC1,
-					temp & ~(PORT_RWC_BITS | PORT_RESUME));
-				retval = handshake(hcd, HC_PORTSC1,
-					   PORT_RESUME, 0, 2000 /* 2msec */);
-				if (retval != 0) {
-					dev_err(hcd->self.controller,
-						"port %d resume error %d\n",
-						wIndex + 1, retval);
-					goto error;
-				}
-				temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
-			}
-		}
-
-		/* whoever resets must GetPortStatus to complete it!! */
-		if ((temp & PORT_RESET)
-				&& time_after_eq(jiffies,
-					priv->reset_done)) {
-			status |= USB_PORT_STAT_C_RESET << 16;
-			priv->reset_done = 0;
-
-			/* force reset to complete */
-			reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET);
-			/* REVISIT:  some hardware needs 550+ usec to clear
-			 * this bit; seems too long to spin routinely...
-			 */
-			retval = handshake(hcd, HC_PORTSC1,
-					PORT_RESET, 0, 750);
-			if (retval != 0) {
-				dev_err(hcd->self.controller, "port %d reset error %d\n",
-						wIndex + 1, retval);
-				goto error;
-			}
-
-			/* see what we found out */
-			temp = check_reset_complete(hcd, wIndex,
-					reg_read32(hcd->regs, HC_PORTSC1));
-		}
-		/*
-		 * Even if OWNER is set, there's no harm letting hub_wq
-		 * see the wPortStatus values (they should all be 0 except
-		 * for PORT_POWER anyway).
-		 */
-
-		if (temp & PORT_OWNER)
-			dev_err(hcd->self.controller, "PORT_OWNER is set\n");
-
-		if (temp & PORT_CONNECT) {
-			status |= USB_PORT_STAT_CONNECTION;
-			/* status may be from integrated TT */
-			status |= USB_PORT_STAT_HIGH_SPEED;
-		}
-		if (temp & PORT_PE)
-			status |= USB_PORT_STAT_ENABLE;
-		if (temp & (PORT_SUSPEND|PORT_RESUME))
-			status |= USB_PORT_STAT_SUSPEND;
-		if (temp & PORT_RESET)
-			status |= USB_PORT_STAT_RESET;
-		if (temp & PORT_POWER)
-			status |= USB_PORT_STAT_POWER;
-
-		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
-		break;
-	case SetHubFeature:
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-		case C_HUB_OVER_CURRENT:
-			/* no hub-wide feature/status flags */
-			break;
-		default:
-			goto error;
-		}
-		break;
-	case SetPortFeature:
-		selector = wIndex >> 8;
-		wIndex &= 0xff;
-		if (!wIndex || wIndex > ports)
-			goto error;
-		wIndex--;
-		temp = reg_read32(hcd->regs, HC_PORTSC1);
-		if (temp & PORT_OWNER)
-			break;
-
-/*		temp &= ~PORT_RWC_BITS; */
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE);
-			break;
-
-		case USB_PORT_FEAT_SUSPEND:
-			if ((temp & PORT_PE) == 0
-					|| (temp & PORT_RESET) != 0)
-				goto error;
-
-			reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND);
-			break;
-		case USB_PORT_FEAT_POWER:
-			if (HCS_PPC(priv->hcs_params))
-				reg_write32(hcd->regs, HC_PORTSC1,
-							temp | PORT_POWER);
-			break;
-		case USB_PORT_FEAT_RESET:
-			if (temp & PORT_RESUME)
-				goto error;
-			/* line status bits may report this as low speed,
-			 * which can be fine if this root hub has a
-			 * transaction translator built in.
-			 */
-			if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
-					&& PORT_USB11(temp)) {
-				temp |= PORT_OWNER;
-			} else {
-				temp |= PORT_RESET;
-				temp &= ~PORT_PE;
-
-				/*
-				 * caller must wait, then call GetPortStatus
-				 * usb 2.0 spec says 50 ms resets on root
-				 */
-				priv->reset_done = jiffies +
-					msecs_to_jiffies(50);
-			}
-			reg_write32(hcd->regs, HC_PORTSC1, temp);
-			break;
-		default:
-			goto error;
-		}
-		reg_read32(hcd->regs, HC_USBCMD);
-		break;
-
-	default:
-error:
-		/* "stall" on error */
-		retval = -EPIPE;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return retval;
-}
-
-static int isp1760_get_frame(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 fr;
-
-	fr = reg_read32(hcd->regs, HC_FRINDEX);
-	return (fr >> 3) % priv->periodic_size;
-}
-
-static void isp1760_stop(struct usb_hcd *hcd)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 temp;
-
-	del_timer(&errata2_timer);
-
-	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
-			NULL, 0);
-	mdelay(20);
-
-	spin_lock_irq(&priv->lock);
-	ehci_reset(hcd);
-	/* Disable IRQ */
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
-	spin_unlock_irq(&priv->lock);
-
-	reg_write32(hcd->regs, HC_CONFIGFLAG, 0);
-}
-
-static void isp1760_shutdown(struct usb_hcd *hcd)
-{
-	u32 command, temp;
-
-	isp1760_stop(hcd);
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-}
-
-static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
-						struct usb_host_endpoint *ep)
-{
-	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	struct isp1760_qh *qh = ep->hcpriv;
-	unsigned long spinflags;
-
-	if (!qh)
-		return;
-
-	spin_lock_irqsave(&priv->lock, spinflags);
-	qh->tt_buffer_dirty = 0;
-	schedule_ptds(hcd);
-	spin_unlock_irqrestore(&priv->lock, spinflags);
-}
-
-
-static const struct hc_driver isp1760_hc_driver = {
-	.description		= "isp1760-hcd",
-	.product_desc		= "NXP ISP1760 USB Host Controller",
-	.hcd_priv_size		= sizeof(struct isp1760_hcd),
-	.irq			= isp1760_irq,
-	.flags			= HCD_MEMORY | HCD_USB2,
-	.reset			= isp1760_hc_setup,
-	.start			= isp1760_run,
-	.stop			= isp1760_stop,
-	.shutdown		= isp1760_shutdown,
-	.urb_enqueue		= isp1760_urb_enqueue,
-	.urb_dequeue		= isp1760_urb_dequeue,
-	.endpoint_disable	= isp1760_endpoint_disable,
-	.get_frame_number	= isp1760_get_frame,
-	.hub_status_data	= isp1760_hub_status_data,
-	.hub_control		= isp1760_hub_control,
-	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
-};
-
-int __init init_kmem_once(void)
-{
-	urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
-			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
-			SLAB_MEM_SPREAD, NULL);
-
-	if (!urb_listitem_cachep)
-		return -ENOMEM;
-
-	qtd_cachep = kmem_cache_create("isp1760_qtd",
-			sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY |
-			SLAB_MEM_SPREAD, NULL);
-
-	if (!qtd_cachep)
-		return -ENOMEM;
-
-	qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
-			0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL);
-
-	if (!qh_cachep) {
-		kmem_cache_destroy(qtd_cachep);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void deinit_kmem_cache(void)
-{
-	kmem_cache_destroy(qtd_cachep);
-	kmem_cache_destroy(qh_cachep);
-	kmem_cache_destroy(urb_listitem_cachep);
-}
-
-struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
-				 int irq, unsigned long irqflags,
-				 int rst_gpio,
-				 struct device *dev, const char *busname,
-				 unsigned int devflags)
-{
-	struct usb_hcd *hcd;
-	struct isp1760_hcd *priv;
-	int ret;
-
-	if (usb_disabled())
-		return ERR_PTR(-ENODEV);
-
-	/* prevent usb-core allocating DMA pages */
-	dev->dma_mask = NULL;
-
-	hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
-	if (!hcd)
-		return ERR_PTR(-ENOMEM);
-
-	priv = hcd_to_priv(hcd);
-	priv->devflags = devflags;
-	priv->rst_gpio = rst_gpio;
-	init_memory(priv);
-	hcd->regs = ioremap(res_start, res_len);
-	if (!hcd->regs) {
-		ret = -EIO;
-		goto err_put;
-	}
-
-	hcd->irq = irq;
-	hcd->rsrc_start = res_start;
-	hcd->rsrc_len = res_len;
-
-	/* This driver doesn't support wakeup requests */
-	hcd->cant_recv_wakeups = 1;
-
-	ret = usb_add_hcd(hcd, irq, irqflags);
-	if (ret)
-		goto err_unmap;
-	device_wakeup_enable(hcd->self.controller);
-
-	return hcd;
-
-err_unmap:
-	 iounmap(hcd->regs);
-
-err_put:
-	 usb_put_hcd(hcd);
-
-	 return ERR_PTR(ret);
-}
-
-MODULE_DESCRIPTION("Driver for the ISP1760 USB-controller from NXP");
-MODULE_AUTHOR("Sebastian Siewior <bigeasy@linuxtronix.de>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
deleted file mode 100644
index 33dc79ccaa6..00000000000
--- a/drivers/usb/host/isp1760-hcd.h
+++ /dev/null
@@ -1,208 +0,0 @@
-#ifndef _ISP1760_HCD_H_
-#define _ISP1760_HCD_H_
-
-/* exports for if */
-struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
-				 int irq, unsigned long irqflags,
-				 int rst_gpio,
-				 struct device *dev, const char *busname,
-				 unsigned int devflags);
-int init_kmem_once(void);
-void deinit_kmem_cache(void);
-
-/* EHCI capability registers */
-#define HC_CAPLENGTH		0x00
-#define HC_HCSPARAMS		0x04
-#define HC_HCCPARAMS		0x08
-
-/* EHCI operational registers */
-#define HC_USBCMD		0x20
-#define HC_USBSTS		0x24
-#define HC_FRINDEX		0x2c
-#define HC_CONFIGFLAG		0x60
-#define HC_PORTSC1		0x64
-#define HC_ISO_PTD_DONEMAP_REG	0x130
-#define HC_ISO_PTD_SKIPMAP_REG	0x134
-#define HC_ISO_PTD_LASTPTD_REG	0x138
-#define HC_INT_PTD_DONEMAP_REG	0x140
-#define HC_INT_PTD_SKIPMAP_REG	0x144
-#define HC_INT_PTD_LASTPTD_REG	0x148
-#define HC_ATL_PTD_DONEMAP_REG	0x150
-#define HC_ATL_PTD_SKIPMAP_REG	0x154
-#define HC_ATL_PTD_LASTPTD_REG	0x158
-
-/* Configuration Register */
-#define HC_HW_MODE_CTRL		0x300
-#define ALL_ATX_RESET		(1 << 31)
-#define HW_ANA_DIGI_OC		(1 << 15)
-#define HW_DATA_BUS_32BIT	(1 << 8)
-#define HW_DACK_POL_HIGH	(1 << 6)
-#define HW_DREQ_POL_HIGH	(1 << 5)
-#define HW_INTR_HIGH_ACT	(1 << 2)
-#define HW_INTR_EDGE_TRIG	(1 << 1)
-#define HW_GLOBAL_INTR_EN	(1 << 0)
-
-#define HC_CHIP_ID_REG		0x304
-#define HC_SCRATCH_REG		0x308
-
-#define HC_RESET_REG		0x30c
-#define SW_RESET_RESET_HC	(1 << 1)
-#define SW_RESET_RESET_ALL	(1 << 0)
-
-#define HC_BUFFER_STATUS_REG	0x334
-#define ISO_BUF_FILL		(1 << 2)
-#define INT_BUF_FILL		(1 << 1)
-#define ATL_BUF_FILL		(1 << 0)
-
-#define HC_MEMORY_REG		0x33c
-#define ISP_BANK(x)		((x) << 16)
-
-#define HC_PORT1_CTRL		0x374
-#define PORT1_POWER		(3 << 3)
-#define PORT1_INIT1		(1 << 7)
-#define PORT1_INIT2		(1 << 23)
-#define HW_OTG_CTRL_SET		0x374
-#define HW_OTG_CTRL_CLR		0x376
-
-/* Interrupt Register */
-#define HC_INTERRUPT_REG	0x310
-
-#define HC_INTERRUPT_ENABLE	0x314
-#define HC_ISO_INT		(1 << 9)
-#define HC_ATL_INT		(1 << 8)
-#define HC_INTL_INT		(1 << 7)
-#define HC_EOT_INT		(1 << 3)
-#define HC_SOT_INT		(1 << 1)
-#define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
-
-#define HC_ISO_IRQ_MASK_OR_REG	0x318
-#define HC_INT_IRQ_MASK_OR_REG	0x31C
-#define HC_ATL_IRQ_MASK_OR_REG	0x320
-#define HC_ISO_IRQ_MASK_AND_REG	0x324
-#define HC_INT_IRQ_MASK_AND_REG	0x328
-#define HC_ATL_IRQ_MASK_AND_REG	0x32C
-
-/* urb state*/
-#define DELETE_URB		(0x0008)
-#define NO_TRANSFER_ACTIVE	(0xffffffff)
-
-/* Philips Proprietary Transfer Descriptor (PTD) */
-typedef __u32 __bitwise __dw;
-struct ptd {
-	__dw dw0;
-	__dw dw1;
-	__dw dw2;
-	__dw dw3;
-	__dw dw4;
-	__dw dw5;
-	__dw dw6;
-	__dw dw7;
-};
-#define PTD_OFFSET		0x0400
-#define ISO_PTD_OFFSET		0x0400
-#define INT_PTD_OFFSET		0x0800
-#define ATL_PTD_OFFSET		0x0c00
-#define PAYLOAD_OFFSET		0x1000
-
-struct slotinfo {
-	struct isp1760_qh *qh;
-	struct isp1760_qtd *qtd;
-	unsigned long timestamp;
-};
-
-
-typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
-		struct isp1760_qtd *qtd);
-
-/*
- * Device flags that can vary from board to board.  All of these
- * indicate the most "atypical" case, so that a devflags of 0 is
- * a sane default configuration.
- */
-#define ISP1760_FLAG_BUS_WIDTH_16	0x00000002 /* 16-bit data bus width */
-#define ISP1760_FLAG_OTG_EN		0x00000004 /* Port 1 supports OTG */
-#define ISP1760_FLAG_ANALOG_OC		0x00000008 /* Analog overcurrent */
-#define ISP1760_FLAG_DACK_POL_HIGH	0x00000010 /* DACK active high */
-#define ISP1760_FLAG_DREQ_POL_HIGH	0x00000020 /* DREQ active high */
-#define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
-#define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
-#define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
-#define ISP1760_FLAG_RESET_ACTIVE_HIGH	0x80000000 /* RESET GPIO active high */
-
-/* chip memory management */
-struct memory_chunk {
-	unsigned int start;
-	unsigned int size;
-	unsigned int free;
-};
-
-/*
- * 60kb divided in:
- * - 32 blocks @ 256  bytes
- * - 20 blocks @ 1024 bytes
- * -  4 blocks @ 8192 bytes
- */
-
-#define BLOCK_1_NUM 32
-#define BLOCK_2_NUM 20
-#define BLOCK_3_NUM 4
-
-#define BLOCK_1_SIZE 256
-#define BLOCK_2_SIZE 1024
-#define BLOCK_3_SIZE 8192
-#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
-#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
-#define PAYLOAD_AREA_SIZE 0xf000
-
-/* ATL */
-/* DW0 */
-#define DW0_VALID_BIT			1
-#define FROM_DW0_VALID(x)		((x) & 0x01)
-#define TO_DW0_LENGTH(x)		(((u32) x) << 3)
-#define TO_DW0_MAXPACKET(x)		(((u32) x) << 18)
-#define TO_DW0_MULTI(x)			(((u32) x) << 29)
-#define TO_DW0_ENDPOINT(x)		(((u32)	x) << 31)
-/* DW1 */
-#define TO_DW1_DEVICE_ADDR(x)		(((u32) x) << 3)
-#define TO_DW1_PID_TOKEN(x)		(((u32) x) << 10)
-#define DW1_TRANS_BULK			((u32) 2 << 12)
-#define DW1_TRANS_INT			((u32) 3 << 12)
-#define DW1_TRANS_SPLIT			((u32) 1 << 14)
-#define DW1_SE_USB_LOSPEED		((u32) 2 << 16)
-#define TO_DW1_PORT_NUM(x)		(((u32) x) << 18)
-#define TO_DW1_HUB_NUM(x)		(((u32) x) << 25)
-/* DW2 */
-#define TO_DW2_DATA_START_ADDR(x)	(((u32) x) << 8)
-#define TO_DW2_RL(x)			((x) << 25)
-#define FROM_DW2_RL(x)			(((x) >> 25) & 0xf)
-/* DW3 */
-#define FROM_DW3_NRBYTESTRANSFERRED(x)		((x) & 0x7fff)
-#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)	((x) & 0x07ff)
-#define TO_DW3_NAKCOUNT(x)		((x) << 19)
-#define FROM_DW3_NAKCOUNT(x)		(((x) >> 19) & 0xf)
-#define TO_DW3_CERR(x)			((x) << 23)
-#define FROM_DW3_CERR(x)		(((x) >> 23) & 0x3)
-#define TO_DW3_DATA_TOGGLE(x)		((x) << 25)
-#define FROM_DW3_DATA_TOGGLE(x)		(((x) >> 25) & 0x1)
-#define TO_DW3_PING(x)			((x) << 26)
-#define FROM_DW3_PING(x)		(((x) >> 26) & 0x1)
-#define DW3_ERROR_BIT			(1 << 28)
-#define DW3_BABBLE_BIT			(1 << 29)
-#define DW3_HALT_BIT			(1 << 30)
-#define DW3_ACTIVE_BIT			(1 << 31)
-#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
-
-#define INT_UNDERRUN			(1 << 2)
-#define INT_BABBLE			(1 << 1)
-#define INT_EXACT			(1 << 0)
-
-#define SETUP_PID	(2)
-#define IN_PID		(1)
-#define OUT_PID		(0)
-
-/* Errata 1 */
-#define RL_COUNTER	(0)
-#define NAK_COUNTER	(0)
-#define ERR_COUNTER	(2)
-
-#endif /* _ISP1760_HCD_H_ */
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
deleted file mode 100644
index 09254a43bc0..00000000000
--- a/drivers/usb/host/isp1760-if.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Glue code for the ISP1760 driver and bus
- * Currently there is support for
- * - OpenFirmware
- * - PCI
- * - PDEV (generic platform device centralized driver model)
- *
- * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
- *
- */
-
-#include <linux/usb.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/usb/isp1760.h>
-#include <linux/usb/hcd.h>
-
-#include "isp1760-hcd.h"
-
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-#endif
-
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
-
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-struct isp1760 {
-	struct usb_hcd *hcd;
-	int rst_gpio;
-};
-
-static int of_isp1760_probe(struct platform_device *dev)
-{
-	struct isp1760 *drvdata;
-	struct device_node *dp = dev->dev.of_node;
-	struct resource *res;
-	struct resource memory;
-	int virq;
-	resource_size_t res_len;
-	int ret;
-	unsigned int devflags = 0;
-	enum of_gpio_flags gpio_flags;
-	u32 bus_width = 0;
-
-	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
-	if (!drvdata)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(dp, 0, &memory);
-	if (ret) {
-		ret = -ENXIO;
-		goto free_data;
-	}
-
-	res_len = resource_size(&memory);
-
-	res = request_mem_region(memory.start, res_len, dev_name(&dev->dev));
-	if (!res) {
-		ret = -EBUSY;
-		goto free_data;
-	}
-
-	virq = irq_of_parse_and_map(dp, 0);
-	if (!virq) {
-		ret = -ENODEV;
-		goto release_reg;
-	}
-
-	if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
-		devflags |= ISP1760_FLAG_ISP1761;
-
-	/* Some systems wire up only 16 of the 32 data lines */
-	of_property_read_u32(dp, "bus-width", &bus_width);
-	if (bus_width == 16)
-		devflags |= ISP1760_FLAG_BUS_WIDTH_16;
-
-	if (of_get_property(dp, "port1-otg", NULL) != NULL)
-		devflags |= ISP1760_FLAG_OTG_EN;
-
-	if (of_get_property(dp, "analog-oc", NULL) != NULL)
-		devflags |= ISP1760_FLAG_ANALOG_OC;
-
-	if (of_get_property(dp, "dack-polarity", NULL) != NULL)
-		devflags |= ISP1760_FLAG_DACK_POL_HIGH;
-
-	if (of_get_property(dp, "dreq-polarity", NULL) != NULL)
-		devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
-
-	drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags);
-	if (gpio_is_valid(drvdata->rst_gpio)) {
-		ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev));
-		if (!ret) {
-			if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) {
-				devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH;
-				gpio_direction_output(drvdata->rst_gpio, 0);
-			} else {
-				gpio_direction_output(drvdata->rst_gpio, 1);
-			}
-		} else {
-			drvdata->rst_gpio = ret;
-		}
-	}
-
-	drvdata->hcd = isp1760_register(memory.start, res_len, virq,
-					IRQF_SHARED, drvdata->rst_gpio,
-					&dev->dev, dev_name(&dev->dev),
-					devflags);
-	if (IS_ERR(drvdata->hcd)) {
-		ret = PTR_ERR(drvdata->hcd);
-		goto free_gpio;
-	}
-
-	platform_set_drvdata(dev, drvdata);
-	return ret;
-
-free_gpio:
-	if (gpio_is_valid(drvdata->rst_gpio))
-		gpio_free(drvdata->rst_gpio);
-release_reg:
-	release_mem_region(memory.start, res_len);
-free_data:
-	kfree(drvdata);
-	return ret;
-}
-
-static int of_isp1760_remove(struct platform_device *dev)
-{
-	struct isp1760 *drvdata = platform_get_drvdata(dev);
-
-	usb_remove_hcd(drvdata->hcd);
-	iounmap(drvdata->hcd->regs);
-	release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len);
-	usb_put_hcd(drvdata->hcd);
-
-	if (gpio_is_valid(drvdata->rst_gpio))
-		gpio_free(drvdata->rst_gpio);
-
-	kfree(drvdata);
-	return 0;
-}
-
-static const struct of_device_id of_isp1760_match[] = {
-	{
-		.compatible = "nxp,usb-isp1760",
-	},
-	{
-		.compatible = "nxp,usb-isp1761",
-	},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, of_isp1760_match);
-
-static struct platform_driver isp1760_of_driver = {
-	.driver = {
-		.name = "nxp-isp1760",
-		.of_match_table = of_isp1760_match,
-	},
-	.probe          = of_isp1760_probe,
-	.remove         = of_isp1760_remove,
-};
-#endif
-
-#ifdef CONFIG_PCI
-static int isp1761_pci_probe(struct pci_dev *dev,
-		const struct pci_device_id *id)
-{
-	u8 latency, limit;
-	__u32 reg_data;
-	int retry_count;
-	struct usb_hcd *hcd;
-	unsigned int devflags = 0;
-	int ret_status = 0;
-
-	resource_size_t pci_mem_phy0;
-	resource_size_t memlength;
-
-	u8 __iomem *chip_addr;
-	u8 __iomem *iobase;
-	resource_size_t nxp_pci_io_base;
-	resource_size_t iolength;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	if (pci_enable_device(dev) < 0)
-		return -ENODEV;
-
-	if (!dev->irq)
-		return -ENODEV;
-
-	/* Grab the PLX PCI mem maped port start address we need  */
-	nxp_pci_io_base = pci_resource_start(dev, 0);
-	iolength = pci_resource_len(dev, 0);
-
-	if (!request_mem_region(nxp_pci_io_base, iolength, "ISP1761 IO MEM")) {
-		printk(KERN_ERR "request region #1\n");
-		return -EBUSY;
-	}
-
-	iobase = ioremap_nocache(nxp_pci_io_base, iolength);
-	if (!iobase) {
-		printk(KERN_ERR "ioremap #1\n");
-		ret_status = -ENOMEM;
-		goto cleanup1;
-	}
-	/* Grab the PLX PCI shared memory of the ISP 1761 we need  */
-	pci_mem_phy0 = pci_resource_start(dev, 3);
-	memlength = pci_resource_len(dev, 3);
-	if (memlength < 0xffff) {
-		printk(KERN_ERR "memory length for this resource is wrong\n");
-		ret_status = -ENOMEM;
-		goto cleanup2;
-	}
-
-	if (!request_mem_region(pci_mem_phy0, memlength, "ISP-PCI")) {
-		printk(KERN_ERR "host controller already in use\n");
-		ret_status = -EBUSY;
-		goto cleanup2;
-	}
-
-	/* map available memory */
-	chip_addr = ioremap_nocache(pci_mem_phy0,memlength);
-	if (!chip_addr) {
-		printk(KERN_ERR "Error ioremap failed\n");
-		ret_status = -ENOMEM;
-		goto cleanup3;
-	}
-
-	/* bad pci latencies can contribute to overruns */
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &latency);
-	if (latency) {
-		pci_read_config_byte(dev, PCI_MAX_LAT, &limit);
-		if (limit && limit < latency)
-			pci_write_config_byte(dev, PCI_LATENCY_TIMER, limit);
-	}
-
-	/* Try to check whether we can access Scratch Register of
-	 * Host Controller or not. The initial PCI access is retried until
-	 * local init for the PCI bridge is completed
-	 */
-	retry_count = 20;
-	reg_data = 0;
-	while ((reg_data != 0xFACE) && retry_count) {
-		/*by default host is in 16bit mode, so
-		 * io operations at this stage must be 16 bit
-		 * */
-		writel(0xface, chip_addr + HC_SCRATCH_REG);
-		udelay(100);
-		reg_data = readl(chip_addr + HC_SCRATCH_REG) & 0x0000ffff;
-		retry_count--;
-	}
-
-	iounmap(chip_addr);
-
-	/* Host Controller presence is detected by writing to scratch register
-	 * and reading back and checking the contents are same or not
-	 */
-	if (reg_data != 0xFACE) {
-		dev_err(&dev->dev, "scratch register mismatch %x\n", reg_data);
-		ret_status = -ENOMEM;
-		goto cleanup3;
-	}
-
-	pci_set_master(dev);
-
-	/* configure PLX PCI chip to pass interrupts */
-#define PLX_INT_CSR_REG 0x68
-	reg_data = readl(iobase + PLX_INT_CSR_REG);
-	reg_data |= 0x900;
-	writel(reg_data, iobase + PLX_INT_CSR_REG);
-
-	dev->dev.dma_mask = NULL;
-	hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq,
-		IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev),
-		devflags);
-	if (IS_ERR(hcd)) {
-		ret_status = -ENODEV;
-		goto cleanup3;
-	}
-
-	/* done with PLX IO access */
-	iounmap(iobase);
-	release_mem_region(nxp_pci_io_base, iolength);
-
-	pci_set_drvdata(dev, hcd);
-	return 0;
-
-cleanup3:
-	release_mem_region(pci_mem_phy0, memlength);
-cleanup2:
-	iounmap(iobase);
-cleanup1:
-	release_mem_region(nxp_pci_io_base, iolength);
-	return ret_status;
-}
-
-static void isp1761_pci_remove(struct pci_dev *dev)
-{
-	struct usb_hcd *hcd;
-
-	hcd = pci_get_drvdata(dev);
-
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-
-	pci_disable_device(dev);
-}
-
-static void isp1761_pci_shutdown(struct pci_dev *dev)
-{
-	printk(KERN_ERR "ips1761_pci_shutdown\n");
-}
-
-static const struct pci_device_id isp1760_plx [] = {
-	{
-		.class          = PCI_CLASS_BRIDGE_OTHER << 8,
-		.class_mask     = ~0,
-		.vendor		= PCI_VENDOR_ID_PLX,
-		.device		= 0x5406,
-		.subvendor	= PCI_VENDOR_ID_PLX,
-		.subdevice	= 0x9054,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, isp1760_plx);
-
-static struct pci_driver isp1761_pci_driver = {
-	.name =         "isp1760",
-	.id_table =     isp1760_plx,
-	.probe =        isp1761_pci_probe,
-	.remove =       isp1761_pci_remove,
-	.shutdown =     isp1761_pci_shutdown,
-};
-#endif
-
-static int isp1760_plat_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct usb_hcd *hcd;
-	struct resource *mem_res;
-	struct resource *irq_res;
-	resource_size_t mem_size;
-	struct isp1760_platform_data *priv = dev_get_platdata(&pdev->dev);
-	unsigned int devflags = 0;
-	unsigned long irqflags = IRQF_SHARED;
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		pr_warning("isp1760: Memory resource not available\n");
-		ret = -ENODEV;
-		goto out;
-	}
-	mem_size = resource_size(mem_res);
-	if (!request_mem_region(mem_res->start, mem_size, "isp1760")) {
-		pr_warning("isp1760: Cannot reserve the memory resource\n");
-		ret = -EBUSY;
-		goto out;
-	}
-
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq_res) {
-		pr_warning("isp1760: IRQ resource not available\n");
-		ret = -ENODEV;
-		goto cleanup;
-	}
-
-	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
-
-	if (priv) {
-		if (priv->is_isp1761)
-			devflags |= ISP1760_FLAG_ISP1761;
-		if (priv->bus_width_16)
-			devflags |= ISP1760_FLAG_BUS_WIDTH_16;
-		if (priv->port1_otg)
-			devflags |= ISP1760_FLAG_OTG_EN;
-		if (priv->analog_oc)
-			devflags |= ISP1760_FLAG_ANALOG_OC;
-		if (priv->dack_polarity_high)
-			devflags |= ISP1760_FLAG_DACK_POL_HIGH;
-		if (priv->dreq_polarity_high)
-			devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
-	}
-
-	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
-			       irqflags, -ENOENT,
-			       &pdev->dev, dev_name(&pdev->dev), devflags);
-
-	platform_set_drvdata(pdev, hcd);
-
-	if (IS_ERR(hcd)) {
-		pr_warning("isp1760: Failed to register the HCD device\n");
-		ret = -ENODEV;
-		goto cleanup;
-	}
-
-	pr_info("ISP1760 USB device initialised\n");
-	return ret;
-
-cleanup:
-	release_mem_region(mem_res->start, mem_size);
-out:
-	return ret;
-}
-
-static int isp1760_plat_remove(struct platform_device *pdev)
-{
-	struct resource *mem_res;
-	resource_size_t mem_size;
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_remove_hcd(hcd);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mem_size = resource_size(mem_res);
-	release_mem_region(mem_res->start, mem_size);
-
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-static struct platform_driver isp1760_plat_driver = {
-	.probe	= isp1760_plat_probe,
-	.remove	= isp1760_plat_remove,
-	.driver	= {
-		.name	= "isp1760",
-	},
-};
-
-static int __init isp1760_init(void)
-{
-	int ret, any_ret = -ENODEV;
-
-	init_kmem_once();
-
-	ret = platform_driver_register(&isp1760_plat_driver);
-	if (!ret)
-		any_ret = 0;
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-	ret = platform_driver_register(&isp1760_of_driver);
-	if (!ret)
-		any_ret = 0;
-#endif
-#ifdef CONFIG_PCI
-	ret = pci_register_driver(&isp1761_pci_driver);
-	if (!ret)
-		any_ret = 0;
-#endif
-
-	if (any_ret)
-		deinit_kmem_cache();
-	return any_ret;
-}
-module_init(isp1760_init);
-
-static void __exit isp1760_exit(void)
-{
-	platform_driver_unregister(&isp1760_plat_driver);
-#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
-	platform_driver_unregister(&isp1760_of_driver);
-#endif
-#ifdef CONFIG_PCI
-	pci_unregister_driver(&isp1761_pci_driver);
-#endif
-	deinit_kmem_cache();
-}
-module_exit(isp1760_exit);