Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 36 insertions, 41 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3d11cf64ebd..0f8b82918a4 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -131,9 +131,9 @@ static inline struct musb *dev_to_musb(struct device *dev)
 /*-------------------------------------------------------------------------*/
 
 #ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 {
-	void __iomem *addr = otg->io_priv;
+	void __iomem *addr = phy->io_priv;
 	int	i = 0;
 	u8	r;
 	u8	power;
@@ -165,10 +165,9 @@ static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
 	return musb_readb(addr, MUSB_ULPI_REG_DATA);
 }
 
-static int musb_ulpi_write(struct otg_transceiver *otg,
-		u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 {
-	void __iomem *addr = otg->io_priv;
+	void __iomem *addr = phy->io_priv;
 	int	i = 0;
 	u8	r = 0;
 	u8	power;
@@ -200,7 +199,7 @@ static int musb_ulpi_write(struct otg_transceiver *otg,
 #define musb_ulpi_write		NULL
 #endif
 
-static struct otg_io_access_ops musb_ulpi_access = {
+static struct usb_phy_io_ops musb_ulpi_access = {
 	.read = musb_ulpi_read,
 	.write = musb_ulpi_write,
 };
@@ -414,6 +413,7 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				u8 devctl, u8 power)
 {
+	struct usb_otg *otg = musb->xceiv->otg;
 	irqreturn_t handled = IRQ_NONE;
 
 	dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
@@ -626,7 +626,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv->gadget->b_hnp_enable;
+					&& otg->gadget->b_hnp_enable;
 			if (musb->is_active) {
 				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
@@ -643,7 +643,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		case OTG_STATE_A_HOST:
 			musb->xceiv->state = OTG_STATE_A_SUSPEND;
 			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv->host->b_hnp_enable;
+					&& otg->host->b_hnp_enable;
 			break;
 		case OTG_STATE_B_HOST:
 			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1017,12 +1017,12 @@ static void musb_shutdown(struct platform_device *pdev)
 	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
 	|| defined(CONFIG_USB_MUSB_AM35X)		\
 	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)
-static ushort __initdata fifo_mode = 4;
+static ushort __devinitdata fifo_mode = 4;
 #elif defined(CONFIG_USB_MUSB_UX500)			\
 	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
-static ushort __initdata fifo_mode = 5;
+static ushort __devinitdata fifo_mode = 5;
 #else
-static ushort __initdata fifo_mode = 2;
+static ushort __devinitdata fifo_mode = 2;
 #endif
 
 /* "modprobe ... fifo_mode=1" etc */
@@ -1035,7 +1035,7 @@ MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
  */
 
 /* mode 0 - fits in 2KB */
-static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_0_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1044,7 +1044,7 @@ static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
 };
 
 /* mode 1 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_1_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1053,7 +1053,7 @@ static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
 };
 
 /* mode 2 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_2_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1063,7 +1063,7 @@ static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
 };
 
 /* mode 3 - fits in 4KB */
-static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_3_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1073,7 +1073,7 @@ static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
 };
 
 /* mode 4 - fits in 16KB */
-static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_4_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1104,7 +1104,7 @@ static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
 };
 
 /* mode 5 - fits in 8KB */
-static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
+static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1140,7 +1140,7 @@ static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
  *
  * returns negative errno or offset for next fifo.
  */
-static int __init
+static int __devinit
 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 		const struct musb_fifo_cfg *cfg, u16 offset)
 {
@@ -1211,11 +1211,11 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
 }
 
-static struct musb_fifo_cfg __initdata ep0_cfg = {
+static struct musb_fifo_cfg __devinitdata ep0_cfg = {
 	.style = FIFO_RXTX, .maxpacket = 64,
 };
 
-static int __init ep_config_from_table(struct musb *musb)
+static int __devinit ep_config_from_table(struct musb *musb)
 {
 	const struct musb_fifo_cfg	*cfg;
 	unsigned		i, n;
@@ -1306,7 +1306,7 @@ done:
  * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
  * @param musb the controller
  */
-static int __init ep_config_from_hw(struct musb *musb)
+static int __devinit ep_config_from_hw(struct musb *musb)
 {
 	u8 epnum = 0;
 	struct musb_hw_ep *hw_ep;
@@ -1353,7 +1353,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
  * configure endpoints, or take their config from silicon
  */
-static int __init musb_core_init(u16 musb_type, struct musb *musb)
+static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 {
 	u8 reg;
 	char *type;
@@ -1589,7 +1589,7 @@ irqreturn_t musb_interrupt(struct musb *musb)
 EXPORT_SYMBOL_GPL(musb_interrupt);
 
 #ifndef CONFIG_MUSB_PIO_ONLY
-static bool __initdata use_dma = 1;
+static bool __devinitdata use_dma = 1;
 
 /* "modprobe ... use_dma=0" etc */
 module_param(use_dma, bool, 0);
@@ -1777,7 +1777,7 @@ static void musb_irq_work(struct work_struct *data)
  * Init support
  */
 
-static struct musb *__init
+static struct musb *__devinit
 allocate_instance(struct device *dev,
 		struct musb_hdrc_config *config, void __iomem *mbase)
 {
@@ -1853,7 +1853,7 @@ static void musb_free(struct musb *musb)
  * @mregs: virtual address of controller registers,
  *	not yet corrected for platform-specific offsets
  */
-static int __init
+static int __devinit
 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 {
 	int			status;
@@ -1961,11 +1961,11 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (is_host_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
-		otg_set_host(musb->xceiv, &hcd->self);
+		otg_set_host(musb->xceiv->otg, &hcd->self);
 
 		if (is_otg_enabled(musb))
 			hcd->self.otg_port = 1;
-		musb->xceiv->host = &hcd->self;
+		musb->xceiv->otg->host = &hcd->self;
 		hcd->power_budget = 2 * (plat->power ? : 250);
 
 		/* program PHY to use external vBus if required */
@@ -1984,10 +1984,10 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
 		MUSB_HST_MODE(musb);
-		musb->xceiv->default_a = 1;
+		musb->xceiv->otg->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 
-		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+		status = usb_add_hcd(musb_to_hcd(musb), 0, 0);
 
 		hcd->self.uses_pio_for_control = 1;
 		dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
@@ -1999,7 +1999,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	} else /* peripheral is enabled */ {
 		MUSB_DEV_MODE(musb);
-		musb->xceiv->default_a = 0;
+		musb->xceiv->otg->default_a = 0;
 		musb->xceiv->state = OTG_STATE_B_IDLE;
 
 		status = musb_gadget_setup(musb);
@@ -2073,7 +2073,7 @@ fail0:
 static u64	*orig_dma_mask;
 #endif
 
-static int __init musb_probe(struct platform_device *pdev)
+static int __devinit musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	int		irq = platform_get_irq_byname(pdev, "mc");
@@ -2102,7 +2102,7 @@ static int __init musb_probe(struct platform_device *pdev)
 	return status;
 }
 
-static int __exit musb_remove(struct platform_device *pdev)
+static int __devexit musb_remove(struct platform_device *pdev)
 {
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	void __iomem	*ctrl_base = musb->ctrl_base;
@@ -2112,11 +2112,9 @@ static int __exit musb_remove(struct platform_device *pdev)
 	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
 	 *  - OTG mode: both roles are deactivated (or never-activated)
 	 */
-	pm_runtime_get_sync(musb->controller);
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
 
-	pm_runtime_put(musb->controller);
 	musb_free(musb);
 	iounmap(ctrl_base);
 	device_init_wakeup(&pdev->dev, 0);
@@ -2364,7 +2362,8 @@ static struct platform_driver musb_driver = {
 		.owner		= THIS_MODULE,
 		.pm		= MUSB_DEV_PM_OPS,
 	},
-	.remove		= __exit_p(musb_remove),
+	.probe		= musb_probe,
+	.remove		= __devexit_p(musb_remove),
 	.shutdown	= musb_shutdown,
 };
 
@@ -2380,13 +2379,9 @@ static int __init musb_init(void)
 		", "
 		"otg (peripheral+host)",
 		musb_driver_name);
-	return platform_driver_probe(&musb_driver, musb_probe);
+	return platform_driver_register(&musb_driver);
 }
-
-/* make us init after usbcore and i2c (transceivers, regulators, etc)
- * and before usb gadget and host-side drivers start to register
- */
-fs_initcall(musb_init);
+module_init(musb_init);
 
 static void __exit musb_cleanup(void)
 {