Merge tag 'usb-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.19 merge window

This time, a very pull request with 216 non-merge
commits. Most of the commits contained here are
sparse or coccinelle fixes ranging from missing
'static' to returning 0 in case of errors.

More importantly, we have the removal the now
unnecessary 'driver' argument to ->udc_stop().

DWC2 learned about Dual-Role builds. Users of
this IP can now have a single driver built for
host and device roles.

DWC3 got support for two new HW platforms: Exynos7
and AMD.

The Broadcom USB 3.0 Device Controller IP is now
supported and so is PLX USB338x, which means DWC3
has lost is badge as the only USB 3.0 peripheral
IP supported on Linux.

Thanks for Tony Lindgren's work, we can now have
a distro-like kernel where all MUSB glue layers
can be built into the same kernel (statically
or dynamically linked) and it'll work in PIO (DMA
will come probably on v3.20).

Other than these, the usual set of cleanups and
non-critical fixes.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 77 insertions, 25 deletions

diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 2daa779f138..3a5ffd57543 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -126,6 +126,52 @@ static void tusb_wbus_quirk(struct musb *musb, int enabled)
 	}
 }
 
+static u32 tusb_fifo_offset(u8 epnum)
+{
+	return 0x200 + (epnum * 0x20);
+}
+
+static u32 tusb_ep_offset(u8 epnum, u16 offset)
+{
+	return 0x10 + offset;
+}
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+static void tusb_ep_select(void __iomem *mbase, u8 epnum)
+{
+	musb_writeb(mbase, MUSB_INDEX, epnum);
+}
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static u8 tusb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static void tusb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
 /*
  * TUSB 6010 may use a parallel bus that doesn't support byte ops;
  * so both loading and unloading FIFOs need explicit byte counts.
@@ -173,7 +219,7 @@ static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
 	}
 }
 
-void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+static void tusb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
 {
 	struct musb *musb = hw_ep->musb;
 	void __iomem	*ep_conf = hw_ep->conf;
@@ -223,7 +269,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
 		tusb_fifo_write_unaligned(fifo, buf, len);
 }
 
-void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+static void tusb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
 {
 	struct musb *musb = hw_ep->musb;
 	void __iomem	*ep_conf = hw_ep->conf;
@@ -415,13 +461,13 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	switch (musb->xceiv->state) {
+	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_BCON:
 		if ((musb->a_wait_bcon != 0)
 			&& (musb->idle_timeout == 0
 				|| time_after(jiffies, musb->idle_timeout))) {
 			dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
-					usb_otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->otg->state));
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
@@ -474,9 +520,9 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
+			&& (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			usb_otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->otg->state));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
 		return;
@@ -493,7 +539,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
-		usb_otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->otg->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&musb_idle_timer, timeout);
 }
@@ -524,7 +570,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 	if (is_on) {
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
 		otg->default_a = 1;
-		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
 		devctl |= MUSB_DEVCTL_SESSION;
 
 		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -537,16 +583,16 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 		/* If ID pin is grounded, we want to be a_idle */
 		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
 		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
-			switch (musb->xceiv->state) {
+			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_WAIT_VRISE:
 			case OTG_STATE_A_WAIT_BCON:
-				musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
-				musb->xceiv->state = OTG_STATE_A_IDLE;
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 				break;
 			default:
-				musb->xceiv->state = OTG_STATE_A_IDLE;
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 			}
 			musb->is_active = 0;
 			otg->default_a = 1;
@@ -554,7 +600,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 		} else {
 			musb->is_active = 0;
 			otg->default_a = 0;
-			musb->xceiv->state = OTG_STATE_B_IDLE;
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 			MUSB_DEV_MODE(musb);
 		}
 
@@ -569,7 +615,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
-		usb_otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->otg->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL),
 		musb_readl(tbase, TUSB_DEV_OTG_STAT),
 		conf, prcm);
@@ -668,23 +714,23 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 
 			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
 				dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
-				if (musb->xceiv->state != OTG_STATE_B_IDLE) {
+				if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) {
 					/* INTR_DISCONNECT can hide... */
-					musb->xceiv->state = OTG_STATE_B_IDLE;
+					musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 					musb->int_usb |= MUSB_INTR_DISCONNECT;
 				}
 				musb->is_active = 0;
 			}
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				usb_otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 			idle_timeout = jiffies + (1 * HZ);
 			schedule_work(&musb->irq_work);
 
 		} else /* A-dev state machine */ {
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
-				usb_otg_state_string(musb->xceiv->state), otg_stat);
+				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 
-			switch (musb->xceiv->state) {
+			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_IDLE:
 				dev_dbg(musb->controller, "Got SRP, turning on VBUS\n");
 				musb_platform_set_vbus(musb, 1);
@@ -731,9 +777,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 		u8	devctl;
 
 		dev_dbg(musb->controller, "%s timer, %03x\n",
-			usb_otg_state_string(musb->xceiv->state), otg_stat);
+			usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 
-		switch (musb->xceiv->state) {
+		switch (musb->xceiv->otg->state) {
 		case OTG_STATE_A_WAIT_VRISE:
 			/* VBUS has probably been valid for a while now,
 			 * but may well have bounced out of range a bit
@@ -745,7 +791,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 					dev_dbg(musb->controller, "devctl %02x\n", devctl);
 					break;
 				}
-				musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+				musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
 				musb->is_active = 0;
 				idle_timeout = jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1135,9 +1181,17 @@ static int tusb_musb_exit(struct musb *musb)
 }
 
 static const struct musb_platform_ops tusb_ops = {
+	.quirks		= MUSB_IN_TUSB,
 	.init		= tusb_musb_init,
 	.exit		= tusb_musb_exit,
 
+	.ep_offset	= tusb_ep_offset,
+	.ep_select	= tusb_ep_select,
+	.fifo_offset	= tusb_fifo_offset,
+	.readb		= tusb_readb,
+	.writeb		= tusb_writeb,
+	.read_fifo	= tusb_read_fifo,
+	.write_fifo	= tusb_write_fifo,
 	.enable		= tusb_musb_enable,
 	.disable	= tusb_musb_disable,
 
@@ -1164,10 +1218,8 @@ static int tusb_probe(struct platform_device *pdev)
 	int				ret;
 
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue) {
-		dev_err(&pdev->dev, "failed to allocate glue context\n");
+	if (!glue)
 		return -ENOMEM;
-	}
 
 	glue->dev			= &pdev->dev;