summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/tusb6010.c
diff options
context:
space:
mode:
authorHeikki Krogerus <heikki.krogerus@linux.intel.com>2012-02-13 13:24:15 +0200
committerFelipe Balbi <balbi@ti.com>2012-02-13 13:52:54 +0200
commitd445b6da8da491e025eb60576ce959f6a3a56a4f (patch)
tree06bf3afc86c3c6248a9c2d980cf359bdb008447e /drivers/usb/musb/tusb6010.c
parent76eb57ec1bf3201d2f417cafa5c974e7c0b6aaf9 (diff)
usb: musb: Start using struct usb_otg
Use struct usb_otg members with OTG specific functions instead of usb_phy members. [ balbi@ti.com: added a missing change on musb_gadget.c to avoid a compile error on a later patch ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb/tusb6010.c')
-rw-r--r--drivers/usb/musb/tusb6010.c14
1 files changed, 8 insertions, 6 deletions
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 5ce01bdb195..0665c14cc54 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -293,7 +293,7 @@ static int tusb_draw_power(struct usb_phy *x, unsigned mA)
* The actual current usage would be very board-specific. For now,
* it's simpler to just use an aggregate (also board-specific).
*/
- if (x->default_a || mA < (musb->min_power << 1))
+ if (x->otg->default_a || mA < (musb->min_power << 1))
mA = 0;
reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
@@ -510,6 +510,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
void __iomem *tbase = musb->ctrl_base;
u32 conf, prcm, timer;
u8 devctl;
+ struct usb_otg *otg = musb->xceiv->otg;
/* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
@@ -522,7 +523,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
if (is_on) {
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
- musb->xceiv->default_a = 1;
+ otg->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
@@ -548,11 +549,11 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on)
musb->xceiv->state = OTG_STATE_A_IDLE;
}
musb->is_active = 0;
- musb->xceiv->default_a = 1;
+ otg->default_a = 1;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
- musb->xceiv->default_a = 0;
+ otg->default_a = 0;
musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
}
@@ -644,6 +645,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
{
u32 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
unsigned long idle_timeout = 0;
+ struct usb_otg *otg = musb->xceiv->otg;
/* ID pin */
if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
@@ -654,7 +656,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
else
default_a = is_host_enabled(musb);
dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B');
- musb->xceiv->default_a = default_a;
+ otg->default_a = default_a;
tusb_musb_set_vbus(musb, default_a);
/* Don't allow idling immediately */
@@ -666,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
/* B-dev state machine: no vbus ~= disconnect */
- if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
+ if ((is_otg_enabled(musb) && !otg->default_a)
|| !is_host_enabled(musb)) {
/* ? musb_root_disconnect(musb); */
musb->port1_status &=