Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.13-rc3.

  Nothing major, but we seem to have an argument about a XHCI fix, so
  I'm not including a revert that Sarah requested, because that breaks a
  USB network driver, and I can't revert the USB network driver fix
  without reintroducing other bugs that it fixed.  So as it is,
  everything should now be working.  Worse case, I can revert the XHCI
  fix before 3.13-final is out, but it seems to work well here with my
  testing, so all should be good.

  Other than that, some driver updates based on reports"

* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
  usb: ohci-pxa27x: include linux/dma-mapping.h
  USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
  usb: tools: fix a regression issue that gcc can't link to pthread
  USB: switch maintainership of chipidea to Peter
  USB: pl2303: fixed handling of CS5 setting
  USB: ftdi_sio: fixed handling of unsupported CSIZE setting
  USB: mos7840: correct handling of CS5 setting
  USB: spcp8x5: correct handling of CS5 setting
  usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
  usb: wusbcore: do device lookup while holding the hc mutex
  usb: wusbcore: send keepalives to unauthenticated devices
  USB: option: support new huawei devices
  USB: serial: option: blacklist interface 1 for Huawei E173s-6
  usb: xhci: Link TRB must not occur within a USB payload burst
  usb: gadget: f_mass_storage: call try_to_freeze only when its safe
  usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
  usb: gadget: ffs: fix sparse warning
  usb: gadget: zero: module parameters can be static
  usb: gadget: storage: fix sparse warning
  ...

1 files changed, 24 insertions, 13 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ced8937a8f..fb0d537435e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2123,6 +2123,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		termios->c_cflag |= CRTSCTS;
 	}
 
+	/*
+	 * All FTDI UART chips are limited to CS7/8. We won't pretend to
+	 * support CS5/6 and revert the CSIZE setting instead.
+	 */
+	if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+		dev_warn(ddev, "requested CSIZE setting not supported\n");
+
+		termios->c_cflag &= ~CSIZE;
+		if (old_termios)
+			termios->c_cflag |= old_termios->c_cflag & CSIZE;
+		else
+			termios->c_cflag |= CS8;
+	}
+
 	cflag = termios->c_cflag;
 
 	if (!old_termios)
@@ -2159,19 +2173,16 @@ no_skip:
 	} else {
 		urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
 	}
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS7:
-			urb_value |= 7;
-			dev_dbg(ddev, "Setting CS7\n");
-			break;
-		case CS8:
-			urb_value |= 8;
-			dev_dbg(ddev, "Setting CS8\n");
-			break;
-		default:
-			dev_err(ddev, "CSIZE was set but not CS7-CS8\n");
-		}
+	switch (cflag & CSIZE) {
+	case CS7:
+		urb_value |= 7;
+		dev_dbg(ddev, "Setting CS7\n");
+		break;
+	default:
+	case CS8:
+		urb_value |= 8;
+		dev_dbg(ddev, "Setting CS8\n");
+		break;
 	}
 
 	/* This is needed by the break command since it uses the same command