Merge tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a few tiny USB fixes for 3.8-rc6.

  Nothing major here, some host controller bug fixes to resolve a number
  of bugs that people have reported, and a bunch of additional device
  ids are added to a number of drivers (which caused code to be deleted
  from the usb-storage driver, always nice)"

* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  USB: storage: optimize to match the Huawei USB storage devices and support new switch command
  USB: storage: Define a new macro for USB storage match rules
  USB: ftdi_sio: add Zolix FTDI PID
  USB: option: add Changhong CH690
  USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
  USB: add OWL CM-160 support to cp210x driver
  USB: EHCI: fix bug in scheduling periodic split transfers
  USB: EHCI: fix for leaking isochronous data
  USB: option: add support for Telit LE920
  USB: qcserial: add Telit Gobi QDL device
  USB: EHCI: fix timer bug affecting port resume
  USB: UHCI: notify usbcore about port resumes
  USB: EHCI: notify usbcore about port resumes
  USB: add usb_hcd_{start,end}_port_resume
  USB: EHCI: unlink one async QH at a time
  USB: EHCI: remove ASS/PSS polling timeout
  usb: Using correct way to clear usb3.0 device's remote wakeup feature.
  usb: Prevent dead ports when xhci is not enabled
  USB: XHCI: fix memory leak of URB-private data
  drivers: xhci: fix incorrect bit test
  ...

1 files changed, 74 insertions, 2 deletions

diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 105d900150c..16b0bf055ee 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 	return 0;
 }
 
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us)
+/* This places the HUAWEI usb dongles in multi-port mode */
+static int usb_stor_huawei_feature_init(struct us_data *us)
 {
 	int result;
 
@@ -104,3 +104,75 @@ int usb_stor_huawei_e220_init(struct us_data *us)
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
+
+/*
+ * It will send a scsi switch command called rewind' to huawei dongle.
+ * When the dongle receives this command at the first time,
+ * it will reboot immediately. After rebooted, it will ignore this command.
+ * So it is  unnecessary to read its response.
+ */
+static int usb_stor_huawei_scsi_init(struct us_data *us)
+{
+	int result = 0;
+	int act_len = 0;
+	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
+	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
+			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcbw->Tag = 0;
+	bcbw->DataTransferLength = 0;
+	bcbw->Flags = bcbw->Lun = 0;
+	bcbw->Length = sizeof(rewind_cmd);
+	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
+	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
+
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
+					US_BULK_CB_WRAP_LEN, &act_len);
+	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
+	return result;
+}
+
+/*
+ * It tries to find the supported Huawei USB dongles.
+ * In Huawei, they assign the following product IDs
+ * for all of their mobile broadband dongles,
+ * including the new dongles in the future.
+ * So if the product ID is not included in this list,
+ * it means it is not Huawei's mobile broadband dongles.
+ */
+static int usb_stor_huawei_dongles_pid(struct us_data *us)
+{
+	struct usb_interface_descriptor *idesc;
+	int idProduct;
+
+	idesc = &us->pusb_intf->cur_altsetting->desc;
+	idProduct = us->pusb_dev->descriptor.idProduct;
+	/* The first port is CDROM,
+	 * means the dongle in the single port mode,
+	 * and a switch command is required to be sent. */
+	if (idesc && idesc->bInterfaceNumber == 0) {
+		if ((idProduct == 0x1001)
+			|| (idProduct == 0x1003)
+			|| (idProduct == 0x1004)
+			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
+			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
+			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+int usb_stor_huawei_init(struct us_data *us)
+{
+	int result = 0;
+
+	if (usb_stor_huawei_dongles_pid(us)) {
+		if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+			result = usb_stor_huawei_scsi_init(us);
+		else
+			result = usb_stor_huawei_feature_init(us);
+	}
+	return result;
+}