Merge branch 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux

* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits)
  OMAP: DSS2: HDMI: fix hdmi clock name
  HACK: OMAP: DSS2: clk hack for OMAP2/3
  OMAP: DSS2: DSS: Fix context save/restore
  OMAP: DSS2: DISPC: Fix context save/restore
  OMAP: DSS2: Remove ctx loss count from dss.c
  OMAP: DSS2: Remove unused code from display.c
  OMAP: DSS2: DISPC: remove finegrained clk enables/disables
  OMAP: DSS2: Remove unused opt_clock_available
  OMAP: DSS2: Use PM runtime & HWMOD support
  OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
  OMAP: DSS2: Remove core_dump_clocks
  OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable
  OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
  OMAP: DSS2: rewrite use of context_loss_count
  OMAP: DSS2: Remove clk optimization at dss init
  OMAP: DSS2: Fix init and unit sequence
  OMAP: DSS2: Clean up probe for DSS & DSI
  OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks
  OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4
  OMAP: DSS2: DSI: sync when disabling a display
  ...

1 files changed, 22 insertions, 33 deletions

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index fdd5d4ae437..4e888ac09b3 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -504,14 +504,18 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
 		return 0;
 
 	r = omapdss_dsi_display_enable(dssdev);
-	if (r)
-		goto err;
+	if (r) {
+		dev_err(&dssdev->dev, "failed to enable DSI\n");
+		goto err1;
+	}
 
 	omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
 
 	r = _taal_enable_te(dssdev, true);
-	if (r)
-		goto err;
+	if (r) {
+		dev_err(&dssdev->dev, "failed to re-enable TE");
+		goto err2;
+	}
 
 	enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
 
@@ -521,13 +525,15 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
 
 	return 0;
 
-err:
-	dev_err(&dssdev->dev, "exit ULPS failed");
-	r = taal_panel_reset(dssdev);
-
-	enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
-	td->ulps_enabled = false;
+err2:
+	dev_err(&dssdev->dev, "failed to exit ULPS");
 
+	r = taal_panel_reset(dssdev);
+	if (!r) {
+		enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+		td->ulps_enabled = false;
+	}
+err1:
 	taal_queue_ulps_work(dssdev);
 
 	return r;
@@ -1241,11 +1247,8 @@ static void taal_power_off(struct omap_dss_device *dssdev)
 	int r;
 
 	r = taal_dcs_write_0(td, DCS_DISPLAY_OFF);
-	if (!r) {
+	if (!r)
 		r = taal_sleep_in(td);
-		/* HACK: wait a bit so that the message goes through */
-		msleep(10);
-	}
 
 	if (r) {
 		dev_err(&dssdev->dev,
@@ -1317,8 +1320,11 @@ static void taal_disable(struct omap_dss_device *dssdev)
 	dsi_bus_lock(dssdev);
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		taal_wake_up(dssdev);
-		taal_power_off(dssdev);
+		int r;
+
+		r = taal_wake_up(dssdev);
+		if (!r)
+			taal_power_off(dssdev);
 	}
 
 	dsi_bus_unlock(dssdev);
@@ -1897,20 +1903,6 @@ err:
 	mutex_unlock(&td->lock);
 }
 
-static int taal_set_update_mode(struct omap_dss_device *dssdev,
-		enum omap_dss_update_mode mode)
-{
-	if (mode != OMAP_DSS_UPDATE_MANUAL)
-		return -EINVAL;
-	return 0;
-}
-
-static enum omap_dss_update_mode taal_get_update_mode(
-		struct omap_dss_device *dssdev)
-{
-	return OMAP_DSS_UPDATE_MANUAL;
-}
-
 static struct omap_dss_driver taal_driver = {
 	.probe		= taal_probe,
 	.remove		= __exit_p(taal_remove),
@@ -1920,9 +1912,6 @@ static struct omap_dss_driver taal_driver = {
 	.suspend	= taal_suspend,
 	.resume		= taal_resume,
 
-	.set_update_mode = taal_set_update_mode,
-	.get_update_mode = taal_get_update_mode,
-
 	.update		= taal_update,
 	.sync		= taal_sync,