Merge branch 'akpm' (Andrew's patch-bomb)

Merge misc patches from Andrew Morton:
 "The MM tree is rather stuck while I wait to find out what the heck is
  happening with sched/numa.  Probably I'll need to route around all the
  code which was added to -next, sigh.

  So this is "everything else", or at least most of it - other small
  bits are still awaiting resolutions of various kinds."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
  lib/decompress.c add __init to decompress_method and data
  kernel/resource.c: fix stack overflow in __reserve_region_with_split()
  omfs: convert to use beXX_add_cpu()
  taskstats: cgroupstats_user_cmd() may leak on error
  aoe: update aoe-internal version number to 50
  aoe: update documentation to better reflect aoe-plus-udev usage
  aoe: remove unused code
  aoe: make dynamic block minor numbers the default
  aoe: update and specify AoE address guards and error messages
  aoe: retain static block device numbers for backwards compatibility
  aoe: support more AoE addresses with dynamic block device minor numbers
  aoe: update documentation with new URL and VM settings reference
  aoe: update copyright year in touched files
  aoe: update internal version number to 49
  aoe: remove unused code and add cosmetic improvements
  aoe: increase net_device reference count while using it
  aoe: associate frames with the AoE storage target
  aoe: disallow unsupported AoE minor addresses
  aoe: do revalidation steps in order
  aoe: failover remote interface based on aoe_deadsecs parameter
  ...

14 files changed, 952 insertions, 184 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 747442d2c0f..0fefa84ed9a 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -149,7 +149,7 @@ enum {
 };
 
 /* Must match above enum */
-static const char *r128_family[] __devinitdata = {
+static char * const r128_family[] __devinitconst = {
 	"AGP",
 	"PCI",
 	"PRO AGP",
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 63cee2e9d62..c101697a4ba 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -229,13 +229,6 @@ config BACKLIGHT_HP700
 	  If you have an HP Jornada 700 series,
 	  say Y to include backlight control driver.
 
-config BACKLIGHT_PROGEAR
-	tristate "Frontpath ProGear Backlight Driver"
-	depends on PCI && X86
-	help
-	  If you have a Frontpath ProGear say Y to enable the
-	  backlight driver.
-
 config BACKLIGHT_CARILLO_RANCH
 	tristate "Intel Carillo Ranch Backlight Driver"
 	depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
@@ -352,6 +345,22 @@ config BACKLIGHT_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_LM3630
+	tristate "Backlight Driver for LM3630"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	select REGMAP_I2C
+	help
+	  This supports TI LM3630 Backlight Driver
+
+config BACKLIGHT_LM3639
+	tristate "Backlight Driver for LM3639"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	select REGMAP_I2C
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This supports TI LM3639 Backlight + 1.5A Flash LED Driver
+
 config BACKLIGHT_LP855X
 	tristate "Backlight driver for TI LP855X"
 	depends on BACKLIGHT_CLASS_DEVICE && I2C
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 00223a62ec1..e7ce7291635 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -23,10 +23,11 @@ obj-$(CONFIG_BACKLIGHT_HP700)	+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3533)	+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_BACKLIGHT_LM3630)	+= lm3630_bl.o
+obj-$(CONFIG_BACKLIGHT_LM3639)	+= lm3639_bl.o
 obj-$(CONFIG_BACKLIGHT_LP855X)	+= lp855x_bl.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_PANDORA)	+= pandora_bl.o
-obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_PWM)	+= pwm_bl.o
 obj-$(CONFIG_BACKLIGHT_DA903X)	+= da903x_bl.o
diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c
index b628d68f516..ac196181fe4 100644
--- a/drivers/video/backlight/da9052_bl.c
+++ b/drivers/video/backlight/da9052_bl.c
@@ -72,7 +72,7 @@ static int da9052_adjust_wled_brightness(struct da9052_bl *wleds)
 	if (ret < 0)
 		return ret;
 
-	msleep(10);
+	usleep_range(10000, 11000);
 
 	if (wleds->brightness) {
 		ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg],
@@ -129,7 +129,6 @@ static int da9052_backlight_probe(struct platform_device *pdev)
 				       &da9052_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "Failed to register backlight\n");
-		devm_kfree(&pdev->dev, wleds);
 		return PTR_ERR(bl);
 	}
 
@@ -149,7 +148,6 @@ static int da9052_backlight_remove(struct platform_device *pdev)
 	wleds->state = DA9052_WLEDS_OFF;
 	da9052_adjust_wled_brightness(wleds);
 	backlight_device_unregister(bl);
-	devm_kfree(&pdev->dev, wleds);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c
index 72dd5556a35..6c5ed6b242c 100644
--- a/drivers/video/backlight/kb3886_bl.c
+++ b/drivers/video/backlight/kb3886_bl.c
@@ -34,9 +34,9 @@ static void kb3886_bl_set_intensity(int intensity)
 	mutex_lock(&bl_mutex);
 	intensity = intensity&0xff;
 	outb(KB3886_ADC_DAC_PWM, KB3886_PARENT);
-	msleep(10);
+	usleep_range(10000, 11000);
 	outb(KB3886_PWM0_WRITE, KB3886_IO);
-	msleep(10);
+	usleep_range(10000, 11000);
 	outb(intensity, KB3886_IO);
 	mutex_unlock(&bl_mutex);
 }
diff --git a/drivers/video/backlight/lm3630_bl.c b/drivers/video/backlight/lm3630_bl.c
new file mode 100644
index 00000000000..dc191441796
--- /dev/null
+++ b/drivers/video/backlight/lm3630_bl.c
@@ -0,0 +1,475 @@
+/*
+* Simple driver for Texas Instruments LM3630 Backlight driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/lm3630_bl.h>
+
+#define REG_CTRL	0x00
+#define REG_CONFIG	0x01
+#define REG_BRT_A	0x03
+#define REG_BRT_B	0x04
+#define REG_INT_STATUS	0x09
+#define REG_INT_EN	0x0A
+#define REG_FAULT	0x0B
+#define REG_PWM_OUTLOW	0x12
+#define REG_PWM_OUTHIGH	0x13
+#define REG_MAX		0x1F
+
+#define INT_DEBOUNCE_MSEC	10
+
+enum lm3630_leds {
+	BLED_ALL = 0,
+	BLED_1,
+	BLED_2
+};
+
+static const char *bled_name[] = {
+	[BLED_ALL] = "lm3630_bled",	/*Bank1 controls all string */
+	[BLED_1] = "lm3630_bled1",	/*Bank1 controls bled1 */
+	[BLED_2] = "lm3630_bled2",	/*Bank1 or 2 controls bled2 */
+};
+
+struct lm3630_chip_data {
+	struct device *dev;
+	struct delayed_work work;
+	int irq;
+	struct workqueue_struct *irqthread;
+	struct lm3630_platform_data *pdata;
+	struct backlight_device *bled1;
+	struct backlight_device *bled2;
+	struct regmap *regmap;
+};
+
+/* initialize chip */
+static int __devinit lm3630_chip_init(struct lm3630_chip_data *pchip)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3630_platform_data *pdata = pchip->pdata;
+
+	/*pwm control */
+	reg_val = ((pdata->pwm_active & 0x01) << 2) | (pdata->pwm_ctrl & 0x03);
+	ret = regmap_update_bits(pchip->regmap, REG_CONFIG, 0x07, reg_val);
+	if (ret < 0)
+		goto out;
+
+	/* bank control */
+	reg_val = ((pdata->bank_b_ctrl & 0x01) << 1) |
+			(pdata->bank_a_ctrl & 0x07);
+	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x07, reg_val);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+	if (ret < 0)
+		goto out;
+
+	/* set initial brightness */
+	if (pdata->bank_a_ctrl != BANK_A_CTRL_DISABLE) {
+		ret = regmap_write(pchip->regmap,
+				   REG_BRT_A, pdata->init_brt_led1);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (pdata->bank_b_ctrl != BANK_B_CTRL_DISABLE) {
+		ret = regmap_write(pchip->regmap,
+				   REG_BRT_B, pdata->init_brt_led2);
+		if (ret < 0)
+			goto out;
+	}
+	return ret;
+
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return ret;
+}
+
+/* interrupt handling */
+static void lm3630_delayed_func(struct work_struct *work)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3630_chip_data *pchip;
+
+	pchip = container_of(work, struct lm3630_chip_data, work.work);
+
+	ret = regmap_read(pchip->regmap, REG_INT_STATUS, &reg_val);
+	if (ret < 0) {
+		dev_err(pchip->dev,
+			"i2c failed to access REG_INT_STATUS Register\n");
+		return;
+	}
+
+	dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", reg_val);
+}
+
+static irqreturn_t lm3630_isr_func(int irq, void *chip)
+{
+	int ret;
+	struct lm3630_chip_data *pchip = chip;
+	unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
+
+	queue_delayed_work(pchip->irqthread, &pchip->work, delay);
+
+	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+	if (ret < 0)
+		goto out;
+
+	return IRQ_HANDLED;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return IRQ_HANDLED;
+}
+
+static int lm3630_intr_config(struct lm3630_chip_data *pchip)
+{
+	INIT_DELAYED_WORK(&pchip->work, lm3630_delayed_func);
+	pchip->irqthread = create_singlethread_workqueue("lm3630-irqthd");
+	if (!pchip->irqthread) {
+		dev_err(pchip->dev, "create irq thread fail...\n");
+		return -1;
+	}
+	if (request_threaded_irq
+	    (pchip->irq, NULL, lm3630_isr_func,
+	     IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630_irq", pchip)) {
+		dev_err(pchip->dev, "request threaded irq fail..\n");
+		return -1;
+	}
+	return 0;
+}
+
+static bool
+set_intensity(struct backlight_device *bl, struct lm3630_chip_data *pchip)
+{
+	if (!pchip->pdata->pwm_set_intensity)
+		return false;
+	pchip->pdata->pwm_set_intensity(bl->props.brightness - 1,
+					pchip->pdata->pwm_period);
+	return true;
+}
+
+/* update and get brightness */
+static int lm3630_bank_a_update_status(struct backlight_device *bl)
+{
+	int ret;
+	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+	/* brightness 0 means disable */
+	if (!bl->props.brightness) {
+		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x04, 0x00);
+		if (ret < 0)
+			goto out;
+		return bl->props.brightness;
+	}
+
+	/* pwm control */
+	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
+		if (!set_intensity(bl, pchip))
+			dev_err(pchip->dev, "No pwm control func. in plat-data\n");
+	} else {
+
+		/* i2c control */
+		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+		if (ret < 0)
+			goto out;
+		mdelay(1);
+		ret = regmap_write(pchip->regmap,
+				   REG_BRT_A, bl->props.brightness - 1);
+		if (ret < 0)
+			goto out;
+	}
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
+	return bl->props.brightness;
+}
+
+static int lm3630_bank_a_get_brightness(struct backlight_device *bl)
+{
+	unsigned int reg_val;
+	int brightness, ret;
+	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
+		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = reg_val & 0x01;
+		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = ((brightness << 8) | reg_val) + 1;
+	} else {
+		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+		if (ret < 0)
+			goto out;
+		mdelay(1);
+		ret = regmap_read(pchip->regmap, REG_BRT_A, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = reg_val + 1;
+	}
+	bl->props.brightness = brightness;
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return 0;
+}
+
+static const struct backlight_ops lm3630_bank_a_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lm3630_bank_a_update_status,
+	.get_brightness = lm3630_bank_a_get_brightness,
+};
+
+static int lm3630_bank_b_update_status(struct backlight_device *bl)
+{
+	int ret;
+	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
+		if (!set_intensity(bl, pchip))
+			dev_err(pchip->dev,
+				"no pwm control func. in plat-data\n");
+	} else {
+		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+		if (ret < 0)
+			goto out;
+		mdelay(1);
+		ret = regmap_write(pchip->regmap,
+				   REG_BRT_B, bl->props.brightness - 1);
+	}
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return bl->props.brightness;
+}
+
+static int lm3630_bank_b_get_brightness(struct backlight_device *bl)
+{
+	unsigned int reg_val;
+	int brightness, ret;
+	struct lm3630_chip_data *pchip = bl_get_data(bl);
+	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
+
+	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
+		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = reg_val & 0x01;
+		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = ((brightness << 8) | reg_val) + 1;
+	} else {
+		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
+		if (ret < 0)
+			goto out;
+		mdelay(1);
+		ret = regmap_read(pchip->regmap, REG_BRT_B, &reg_val);
+		if (ret < 0)
+			goto out;
+		brightness = reg_val + 1;
+	}
+	bl->props.brightness = brightness;
+
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return bl->props.brightness;
+}
+
+static const struct backlight_ops lm3630_bank_b_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lm3630_bank_b_update_status,
+	.get_brightness = lm3630_bank_b_get_brightness,
+};
+
+static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
+				     enum lm3630_leds ledno)
+{
+	const char *name = bled_name[ledno];
+	struct backlight_properties props;
+	struct lm3630_platform_data *pdata = pchip->pdata;
+
+	props.type = BACKLIGHT_RAW;
+	switch (ledno) {
+	case BLED_1:
+	case BLED_ALL:
+		props.brightness = pdata->init_brt_led1;
+		props.max_brightness = pdata->max_brt_led1;
+		pchip->bled1 =
+		    backlight_device_register(name, pchip->dev, pchip,
+					      &lm3630_bank_a_ops, &props);
+		if (IS_ERR(pchip->bled1))
+			return -EIO;
+		break;
+	case BLED_2:
+		props.brightness = pdata->init_brt_led2;
+		props.max_brightness = pdata->max_brt_led2;
+		pchip->bled2 =
+		    backlight_device_register(name, pchip->dev, pchip,
+					      &lm3630_bank_b_ops, &props);
+		if (IS_ERR(pchip->bled2))
+			return -EIO;
+		break;
+	}
+	return 0;
+}
+
+static void lm3630_backlight_unregister(struct lm3630_chip_data *pchip)
+{
+	if (pchip->bled1)
+		backlight_device_unregister(pchip->bled1);
+	if (pchip->bled2)
+		backlight_device_unregister(pchip->bled2);
+}
+
+static const struct regmap_config lm3630_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+};
+
+static int __devinit lm3630_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lm3630_platform_data *pdata = client->dev.platform_data;
+	struct lm3630_chip_data *pchip;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "fail : i2c functionality check...\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "fail : no platform data.\n");
+		return -ENODATA;
+	}
+
+	pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip_data),
+			     GFP_KERNEL);
+	if (!pchip)
+		return -ENOMEM;
+	pchip->pdata = pdata;
+	pchip->dev = &client->dev;
+
+	pchip->regmap = devm_regmap_init_i2c(client, &lm3630_regmap);
+	if (IS_ERR(pchip->regmap)) {
+		ret = PTR_ERR(pchip->regmap);
+		dev_err(&client->dev, "fail : allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+	i2c_set_clientdata(client, pchip);
+
+	/* chip initialize */
+	ret = lm3630_chip_init(pchip);
+	if (ret < 0) {
+		dev_err(&client->dev, "fail : init chip\n");
+		goto err_chip_init;
+	}
+
+	switch (pdata->bank_a_ctrl) {
+	case BANK_A_CTRL_ALL:
+		ret = lm3630_backlight_register(pchip, BLED_ALL);
+		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
+		break;
+	case BANK_A_CTRL_LED1:
+		ret = lm3630_backlight_register(pchip, BLED_1);
+		break;
+	case BANK_A_CTRL_LED2:
+		ret = lm3630_backlight_register(pchip, BLED_2);
+		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
+		break;
+	default:
+		break;
+	}
+
+	if (ret < 0)
+		goto err_bl_reg;
+
+	if (pdata->bank_b_ctrl && pchip->bled2 == NULL) {
+		ret = lm3630_backlight_register(pchip, BLED_2);
+		if (ret < 0)
+			goto err_bl_reg;
+	}
+
+	/* interrupt enable  : irq 0 is not allowed for lm3630 */
+	pchip->irq = client->irq;
+	if (pchip->irq)
+		lm3630_intr_config(pchip);
+
+	dev_info(&client->dev, "LM3630 backlight register OK.\n");
+	return 0;
+
+err_bl_reg:
+	dev_err(&client->dev, "fail : backlight register.\n");
+	lm3630_backlight_unregister(pchip);
+err_chip_init:
+	return ret;
+}
+
+static int __devexit lm3630_remove(struct i2c_client *client)
+{
+	int ret;
+	struct lm3630_chip_data *pchip = i2c_get_clientdata(client);
+
+	ret = regmap_write(pchip->regmap, REG_BRT_A, 0);
+	if (ret < 0)
+		dev_err(pchip->dev, "i2c failed to access register\n");
+
+	ret = regmap_write(pchip->regmap, REG_BRT_B, 0);
+	if (ret < 0)
+		dev_err(pchip->dev, "i2c failed to access register\n");
+
+	lm3630_backlight_unregister(pchip);
+	if (pchip->irq) {
+		free_irq(pchip->irq, pchip);
+		flush_workqueue(pchip->irqthread);
+		destroy_workqueue(pchip->irqthread);
+	}
+	return 0;
+}
+
+static const struct i2c_device_id lm3630_id[] = {
+	{LM3630_NAME, 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3630_id);
+
+static struct i2c_driver lm3630_i2c_driver = {
+	.driver = {
+		   .name = LM3630_NAME,
+		   },
+	.probe = lm3630_probe,
+	.remove = __devexit_p(lm3630_remove),
+	.id_table = lm3630_id,
+};
+
+module_i2c_driver(lm3630_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630");
+MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
new file mode 100644
index 00000000000..c6915c6c3cd
--- /dev/null
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -0,0 +1,437 @@
+/*
+* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip
+* Copyright (C) 2012 Texas Instruments
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+*/
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/lm3639_bl.h>
+
+#define REG_DEV_ID	0x00
+#define REG_CHECKSUM	0x01
+#define REG_BL_CONF_1	0x02
+#define REG_BL_CONF_2	0x03
+#define REG_BL_CONF_3	0x04
+#define REG_BL_CONF_4	0x05
+#define REG_FL_CONF_1	0x06
+#define REG_FL_CONF_2	0x07
+#define REG_FL_CONF_3	0x08
+#define REG_IO_CTRL	0x09
+#define REG_ENABLE	0x0A
+#define REG_FLAG	0x0B
+#define REG_MAX		REG_FLAG
+
+struct lm3639_chip_data {
+	struct device *dev;
+	struct lm3639_platform_data *pdata;
+
+	struct backlight_device *bled;
+	struct led_classdev cdev_flash;
+	struct led_classdev cdev_torch;
+	struct regmap *regmap;
+
+	unsigned int bled_mode;
+	unsigned int bled_map;
+	unsigned int last_flag;
+};
+
+/* initialize chip */
+static int __devinit lm3639_chip_init(struct lm3639_chip_data *pchip)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3639_platform_data *pdata = pchip->pdata;
+
+	/* input pins config. */
+	ret =
+	    regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08,
+			       pdata->pin_pwm);
+	if (ret < 0)
+		goto out;
+
+	reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx;
+	ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val);
+	if (ret < 0)
+		goto out;
+
+	/* init brightness */
+	ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led);
+	if (ret < 0)
+		goto out;
+
+	/* output pins config. */
+	if (!pdata->init_brt_led)
+		reg_val = pdata->fled_pins | pdata->bled_pins;
+	else
+		reg_val = pdata->fled_pins | pdata->bled_pins | 0x01;
+
+	ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val);
+	if (ret < 0)
+		goto out;
+
+	return ret;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return ret;
+}
+
+/* update and get brightness */
+static int lm3639_bled_update_status(struct backlight_device *bl)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3639_chip_data *pchip = bl_get_data(bl);
+	struct lm3639_platform_data *pdata = pchip->pdata;
+
+	ret = regmap_read(pchip->regmap, REG_FLAG, &reg_val);
+	if (ret < 0)
+		goto out;
+
+	if (reg_val != 0)
+		dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
+
+	/* pwm control */
+	if (pdata->pin_pwm) {
+		if (pdata->pwm_set_intensity)
+			pdata->pwm_set_intensity(bl->props.brightness,
+						 pdata->max_brt_led);
+		else
+			dev_err(pchip->dev,
+				"No pwm control func. in plat-data\n");
+		return bl->props.brightness;
+	}
+
+	/* i2c control and set brigtness */
+	ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness);
+	if (ret < 0)
+		goto out;
+	ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness);
+	if (ret < 0)
+		goto out;
+
+	if (!bl->props.brightness)
+		ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00);
+	else
+		ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01);
+	if (ret < 0)
+		goto out;
+
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access registers\n");
+	return bl->props.brightness;
+}
+
+static int lm3639_bled_get_brightness(struct backlight_device *bl)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3639_chip_data *pchip = bl_get_data(bl);
+	struct lm3639_platform_data *pdata = pchip->pdata;
+
+	if (pdata->pin_pwm) {
+		if (pdata->pwm_get_intensity)
+			bl->props.brightness = pdata->pwm_get_intensity();
+		else
+			dev_err(pchip->dev,
+				"No pwm control func. in plat-data\n");
+		return bl->props.brightness;
+	}
+
+	ret = regmap_read(pchip->regmap, REG_BL_CONF_1, &reg_val);
+	if (ret < 0)
+		goto out;
+	if (reg_val & 0x10)
+		ret = regmap_read(pchip->regmap, REG_BL_CONF_4, &reg_val);
+	else
+		ret = regmap_read(pchip->regmap, REG_BL_CONF_3, &reg_val);
+	if (ret < 0)
+		goto out;
+	bl->props.brightness = reg_val;
+
+	return bl->props.brightness;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return bl->props.brightness;
+}
+
+static const struct backlight_ops lm3639_bled_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lm3639_bled_update_status,
+	.get_brightness = lm3639_bled_get_brightness,
+};
+
+/* backlight mapping mode */
+static ssize_t lm3639_bled_mode_store(struct device *dev,
+				      struct device_attribute *devAttr,
+				      const char *buf, size_t size)
+{
+	ssize_t ret;
+	struct lm3639_chip_data *pchip = dev_get_drvdata(dev);
+	unsigned int state;
+
+	ret = kstrtouint(buf, 10, &state);
+	if (ret)
+		goto out_input;
+
+	if (!state)
+		ret =
+		    regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
+				       0x00);
+	else
+		ret =
+		    regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10,
+				       0x10);
+
+	if (ret < 0)
+		goto out;
+
+	return size;
+
+out:
+	dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__);
+	return size;
+
+out_input:
+	dev_err(pchip->dev, "%s:input conversion fail\n", __func__);
+	return size;
+
+}
+
+static DEVICE_ATTR(bled_mode, 0666, NULL, lm3639_bled_mode_store);
+
+/* torch */
+static void lm3639_torch_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3639_chip_data *pchip;
+
+	pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch);
+
+	ret = regmap_read(pchip->regmap, REG_FLAG, &reg_val);
+	if (ret < 0)
+		goto out;
+	if (reg_val != 0)
+		dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
+
+	/* brightness 0 means off state */
+	if (!brightness) {
+		ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
+		if (ret < 0)
+			goto out;
+		return;
+	}
+
+	ret = regmap_update_bits(pchip->regmap,
+				 REG_FL_CONF_1, 0x70, (brightness - 1) << 4);
+	if (ret < 0)
+		goto out;
+	ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02);
+	if (ret < 0)
+		goto out;
+
+	return;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return;
+}
+
+/* flash */
+static void lm3639_flash_brightness_set(struct led_classdev *cdev,
+					enum led_brightness brightness)
+{
+	int ret;
+	unsigned int reg_val;
+	struct lm3639_chip_data *pchip;
+
+	pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash);
+
+	ret = regmap_read(pchip->regmap, REG_FLAG, &reg_val);
+	if (ret < 0)
+		goto out;
+	if (reg_val != 0)
+		dev_info(pchip->dev, "last flag is 0x%x\n", reg_val);
+
+	/* torch off before flash control */
+	ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00);
+	if (ret < 0)
+		goto out;
+
+	/* brightness 0 means off state */
+	if (!brightness)
+		return;
+
+	ret = regmap_update_bits(pchip->regmap,
+				 REG_FL_CONF_1, 0x0F, brightness - 1);
+	if (ret < 0)
+		goto out;
+	ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06);
+	if (ret < 0)
+		goto out;
+
+	return;
+out:
+	dev_err(pchip->dev, "i2c failed to access register\n");
+	return;
+}
+
+static const struct regmap_config lm3639_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+};
+
+static int __devinit lm3639_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	int ret;
+	struct lm3639_chip_data *pchip;
+	struct lm3639_platform_data *pdata = client->dev.platform_data;
+	struct backlight_properties props;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c functionality check fail.\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "Needs Platform Data.\n");
+		return -ENODATA;
+	}
+
+	pchip = devm_kzalloc(&client->dev,
+			     sizeof(struct lm3639_chip_data), GFP_KERNEL);
+	if (!pchip)
+		return -ENOMEM;
+
+	pchip->pdata = pdata;
+	pchip->dev = &client->dev;
+
+	pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap);
+	if (IS_ERR(pchip->regmap)) {
+		ret = PTR_ERR(pchip->regmap);
+		dev_err(&client->dev, "fail : allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+	i2c_set_clientdata(client, pchip);
+
+	/* chip initialize */
+	ret = lm3639_chip_init(pchip);
+	if (ret < 0) {
+		dev_err(&client->dev, "fail : chip init\n");
+		goto err_out;
+	}
+
+	/* backlight */
+	props.type = BACKLIGHT_RAW;
+	props.brightness = pdata->init_brt_led;
+	props.max_brightness = pdata->max_brt_led;
+	pchip->bled =
+	    backlight_device_register("lm3639_bled", pchip->dev, pchip,
+				      &lm3639_bled_ops, &props);
+	if (IS_ERR(pchip->bled)) {
+		dev_err(&client->dev, "fail : backlight register\n");
+		ret = -EIO;
+		goto err_out;
+	}
+
+	ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed : add sysfs entries\n");
+		ret = -EIO;
+		goto err_bled_mode;
+	}
+
+	/* flash */
+	pchip->cdev_flash.name = "lm3639_flash";
+	pchip->cdev_flash.max_brightness = 16;
+	pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set;
+	ret = led_classdev_register((struct device *)
+				    &client->dev, &pchip->cdev_flash);
+	if (ret < 0) {
+		dev_err(&client->dev, "fail : flash register\n");
+		ret = -EIO;
+		goto err_flash;
+	}
+
+	/* torch */
+	pchip->cdev_torch.name = "lm3639_torch";
+	pchip->cdev_torch.max_brightness = 8;
+	pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set;
+	ret = led_classdev_register((struct device *)
+				    &client->dev, &pchip->cdev_torch);
+	if (ret < 0) {
+		dev_err(&client->dev, "fail : torch register\n");
+		ret = -EIO;
+		goto err_torch;
+	}
+
+	return 0;
+
+err_torch:
+	led_classdev_unregister(&pchip->cdev_flash);
+err_flash:
+	device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
+err_bled_mode:
+	backlight_device_unregister(pchip->bled);
+err_out:
+	return ret;
+}
+
+static int __devexit lm3639_remove(struct i2c_client *client)
+{
+	struct lm3639_chip_data *pchip = i2c_get_clientdata(client);
+
+	regmap_write(pchip->regmap, REG_ENABLE, 0x00);
+
+	if (&pchip->cdev_torch)
+		led_classdev_unregister(&pchip->cdev_torch);
+	if (&pchip->cdev_flash)
+		led_classdev_unregister(&pchip->cdev_flash);
+	if (pchip->bled) {
+		device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
+		backlight_device_unregister(pchip->bled);
+	}
+	return 0;
+}
+
+static const struct i2c_device_id lm3639_id[] = {
+	{LM3639_NAME, 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3639_id);
+static struct i2c_driver lm3639_i2c_driver = {
+	.driver = {
+		   .name = LM3639_NAME,
+		   },
+	.probe = lm3639_probe,
+	.remove = __devexit_p(lm3639_remove),
+	.id_table = lm3639_id,
+};
+
+module_i2c_driver(lm3639_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
index 6c0f1ac0d32..4066a5bbd82 100644
--- a/drivers/video/backlight/ltv350qv.c
+++ b/drivers/video/backlight/ltv350qv.c
@@ -75,7 +75,7 @@ static int ltv350qv_power_on(struct ltv350qv *lcd)
 	/* Power On Reset Display off State */
 	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
 		goto err;
-	msleep(15);
+	usleep_range(15000, 16000);
 
 	/* Power Setting Function 1 */
 	if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
@@ -153,7 +153,7 @@ err_settings:
 err_power2:
 err_power1:
 	ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-	msleep(1);
+	usleep_range(1000, 1100);
 err:
 	ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
 	return -EIO;
@@ -175,7 +175,7 @@ static int ltv350qv_power_off(struct ltv350qv *lcd)
 	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
 
 	/* Wait at least 1 ms */
-	msleep(1);
+	usleep_range(1000, 1100);
 
 	/* Power down setting 2 */
 	ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index b6672340d6c..ca4f5d70fe1 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -16,6 +16,7 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/lcd.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 
 #include <video/platform_lcd.h>
@@ -145,6 +146,14 @@ static SIMPLE_DEV_PM_OPS(platform_lcd_pm_ops, platform_lcd_suspend,
 			platform_lcd_resume);
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id platform_lcd_of_match[] = {
+	{ .compatible = "platform-lcd" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, platform_lcd_of_match);
+#endif
+
 static struct platform_driver platform_lcd_driver = {
 	.driver		= {
 		.name	= "platform-lcd",
@@ -152,6 +161,7 @@ static struct platform_driver platform_lcd_driver = {
 #ifdef CONFIG_PM
 		.pm	= &platform_lcd_pm_ops,
 #endif
+		.of_match_table = of_match_ptr(platform_lcd_of_match),
 	},
 	.probe		= platform_lcd_probe,
 	.remove		= __devexit_p(platform_lcd_remove),
diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c
deleted file mode 100644
index 69b35f02929..00000000000
--- a/drivers/video/backlight/progear_bl.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  Backlight Driver for Frontpath ProGear HX1050+
- *
- *  Copyright (c) 2006 Marcin Juszkiewicz
- *
- *  Based on Progear LCD driver by M Schacht
- *  <mschacht at alumni dot washington dot edu>
- *
- *  Based on Sharp's Corgi Backlight Driver
- *  Based on Backlight Driver for HP Jornada 680
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-#include <linux/pci.h>
-
-#define PMU_LPCR               0xB0
-#define SB_MPS1                0x61
-#define HW_LEVEL_MAX           0x77
-#define HW_LEVEL_MIN           0x4f
-
-static struct pci_dev *pmu_dev = NULL;
-static struct pci_dev *sb_dev = NULL;
-
-static int progearbl_set_intensity(struct backlight_device *bd)
-{
-	int intensity = bd->props.brightness;
-
-	if (bd->props.power != FB_BLANK_UNBLANK)
-		intensity = 0;
-	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-		intensity = 0;
-
-	pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
-
-	return 0;
-}
-
-static int progearbl_get_intensity(struct backlight_device *bd)
-{
-	u8 intensity;
-	pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
-
-	return intensity - HW_LEVEL_MIN;
-}
-
-static const struct backlight_ops progearbl_ops = {
-	.get_brightness = progearbl_get_intensity,
-	.update_status = progearbl_set_intensity,
-};
-
-static int progearbl_probe(struct platform_device *pdev)
-{
-	struct backlight_properties props;
-	u8 temp;
-	struct backlight_device *progear_backlight_device;
-	int ret;
-
-	pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL);
-	if (!pmu_dev) {
-		pr_err("ALI M7101 PMU not found.\n");
-		return -ENODEV;
-	}
-
-	sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-	if (!sb_dev) {
-		pr_err("ALI 1533 SB not found.\n");
-		ret = -ENODEV;
-		goto put_pmu;
-	}
-
-	/*     Set SB_MPS1 to enable brightness control. */
-	pci_read_config_byte(sb_dev, SB_MPS1, &temp);
-	pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_RAW;
-	props.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-	progear_backlight_device = backlight_device_register("progear-bl",
-							     &pdev->dev, NULL,
-							     &progearbl_ops,
-							     &props);
-	if (IS_ERR(progear_backlight_device)) {
-		ret = PTR_ERR(progear_backlight_device);
-		goto put_sb;
-	}
-
-	platform_set_drvdata(pdev, progear_backlight_device);
-
-	progear_backlight_device->props.power = FB_BLANK_UNBLANK;
-	progear_backlight_device->props.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-	progearbl_set_intensity(progear_backlight_device);
-
-	return 0;
-put_sb:
-	pci_dev_put(sb_dev);
-put_pmu:
-	pci_dev_put(pmu_dev);
-	return ret;
-}
-
-static int progearbl_remove(struct platform_device *pdev)
-{
-	struct backlight_device *bd = platform_get_drvdata(pdev);
-	backlight_device_unregister(bd);
-
-	return 0;
-}
-
-static struct platform_driver progearbl_driver = {
-	.probe = progearbl_probe,
-	.remove = progearbl_remove,
-	.driver = {
-		   .name = "progear-bl",
-		   },
-};
-
-static struct platform_device *progearbl_device;
-
-static int __init progearbl_init(void)
-{
-	int ret = platform_driver_register(&progearbl_driver);
-
-	if (ret)
-		return ret;
-	progearbl_device = platform_device_register_simple("progear-bl", -1,
-								NULL, 0);
-	if (IS_ERR(progearbl_device)) {
-		platform_driver_unregister(&progearbl_driver);
-		return PTR_ERR(progearbl_device);
-	}
-
-	return 0;
-}
-
-static void __exit progearbl_exit(void)
-{
-	pci_dev_put(pmu_dev);
-	pci_dev_put(sb_dev);
-
-	platform_device_unregister(progearbl_device);
-	platform_driver_unregister(&progearbl_driver);
-}
-
-module_init(progearbl_init);
-module_exit(progearbl_exit);
-
-MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>");
-MODULE_DESCRIPTION("ProGear Backlight Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c
index 5a5d0928df3..265c5ed59ad 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/geode/gx1fb_core.c
@@ -29,7 +29,7 @@ static int  crt_option = 1;
 static char panel_option[32] = "";
 
 /* Modes relevant to the GX1 (taken from modedb.c) */
-static const struct fb_videomode __devinitdata gx1_modedb[] = {
+static const struct fb_videomode __devinitconst gx1_modedb[] = {
 	/* 640x480-60 VESA */
 	{ NULL, 60, 640, 480, 39682,  48, 16, 33, 10, 96, 2,
 	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
diff --git a/drivers/video/gxt4500.c b/drivers/video/gxt4500.c
index 0fad23f810a..0e9afa41d16 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/gxt4500.c
@@ -156,7 +156,7 @@ struct gxt4500_par {
 static char *mode_option;
 
 /* default mode: 1280x1024 @ 60 Hz, 8 bpp */
-static const struct fb_videomode defaultmode __devinitdata = {
+static const struct fb_videomode defaultmode __devinitconst = {
 	.refresh = 60,
 	.xres = 1280,
 	.yres = 1024,
@@ -581,7 +581,7 @@ static int gxt4500_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static const struct fb_fix_screeninfo gxt4500_fix __devinitdata = {
+static const struct fb_fix_screeninfo gxt4500_fix __devinitconst = {
 	.id = "IBM GXT4500P",
 	.type = FB_TYPE_PACKED_PIXELS,
 	.visual = FB_VISUAL_PSEUDOCOLOR,
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index b83f36190ca..5c067816a81 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -97,7 +97,7 @@ static int i810fb_blank      (int blank_mode, struct fb_info *info);
 static void i810fb_release_resource       (struct fb_info *info, struct i810fb_par *par);
 
 /* PCI */
-static const char *i810_pci_list[] __devinitdata = {
+static const char * const i810_pci_list[] __devinitconst = {
 	"Intel(R) 810 Framebuffer Device"                                 ,
 	"Intel(R) 810-DC100 Framebuffer Device"                           ,
 	"Intel(R) 810E Framebuffer Device"                                ,
diff --git a/drivers/video/jz4740_fb.c b/drivers/video/jz4740_fb.c
index de366937c93..3c63fc24bb1 100644
--- a/drivers/video/jz4740_fb.c
+++ b/drivers/video/jz4740_fb.c
@@ -136,7 +136,7 @@ struct jzfb {
 	uint32_t pseudo_palette[16];
 };
 
-static const struct fb_fix_screeninfo jzfb_fix __devinitdata = {
+static const struct fb_fix_screeninfo jzfb_fix __devinitconst = {
 	.id		= "JZ4740 FB",
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_TRUECOLOR,